5150Re: [wsjtgroup] Re: Clock sync
- Sep 4, 2008Hello All:It sounds like all D4 users who are having problems need to change to Automachron from http://oneguycoding.com/I have used it for a long, long time. I use clepsydra.dec.com for the host, but you can use 1.us.pool.ntp.org or 2.us.pool.ntp.org or 0.us.pool.ntp.orgOptions are pretty self explanatory. I update every 360 seconds.GLAl WA4EWV----- Original Message -----From: k4ymqSent: Thursday, September 04, 2008 4:30 PMSubject: [wsjtgroup] Re: Clock sync
D4 has been a real stinko as far as getting it to run and continue to
run while computer is on. I never had any problem until I got new PC
running XP.. D4 would timeout with error msg not able to connect... I
updated to ver. 5 which is supposed to run with XP and use the
recommened time site (http) also. It works perfect on bootup, but
will usually fail on the next attempt to check time. any one else
having this problem or had it and resolved the problem.
--- In wsjtgroup@yahoogrou ps.com, "Randy Tipton" <wa5ufh@...> wrote:
> I used to run D4 with my old XP Dell PC. I needed to have the time
> every 5 minutes in order to have the correct time.
> After changing to "Windows Vista" I no longer use D4. I have the
> system reset my clock every 4 hours. The new PC keeps very accurate
> (It is a Dell also but much better than the old one) The better
> probably not a function of the operating system???
> For information on how to set up the paramemeters using windows
> this link...
> http://www.howtogee k.com/howto/ windows-vista/ dealing-with- windows-
> Vista default is 7 days. I suggest following the directions and
> time sync update interval to every hour. If not often enough, then
> needed. I no longer use D4 thus one less application open!
> Works for me. XP automatic time update was a weak link, Vista much
> From: "Charles Miller" <n6kw@...>
> To: "Bill W5WVO" <w5wvo@...>
> Cc: <mike.kc9doa@ ...>; <wsjtgroup@yahoogrou ps.com>
> Sent: Thursday, September 04, 2008 2:40 PM
> Subject: Re: [wsjtgroup] Clock sync
> > If you're using Dimension 4 or similar time-setting software,
> > you need to disable the Windows time-set anyway. They don't play
> > well together.
> > 73, Chuck N6KW
> > Bill W5WVO wrote:
> >> Here's something I just ran across on SmartComputing. com, which I
> >> subscribe to:
> >> "/WinXP automatically sets your clock on a weekly basis.*
> >> however, that some computers with unusual hardware
> >> time if you enable automatic synchronization. If your PC loses
> >> five minutes a day, Microsoft recommends disabling this
> >> If you are running WinXP (or Vista, presumably, though I don't
> >> you might want to check and see if you have automatic
> >> time synchronization enabled, and if so, turn it off.
> >> Bill W5WVO
> >> ----- Original Message -----
> >> *From:* Bill W5WVO <mailto:w5wvo@ ...>
> >> *To:* mike.kc9doa@ ... <mailto:mike. kc9doa@.. .> ;
> >> wsjtgroup@yahoogrou ps.com <mailto:wsjtgroup@yahoogrou ps.com>
> >> *Sent:* Tuesday, September 02, 2008 5:19 PM
> >> *Subject:* Re: [wsjtgroup] Clock sync
> >> The hardware real-time clock (RTC) on your motherboard is
> >> the equivalent of a cheap battery-operated wristwatch,
> >> self-contained in a small module, or even embedded in the
> >> motherboard chipset. Your computer reads the time from the
> >> RTC when it is booted up, and based on this reading, it
> >> software RTC service that runs as long as the computer OS is
> >> running. The hardware RTC is normally not consulted again
> >> reboot.
> >> This software RTC that displays time on your desktop is
> >> Windows OS service that depends upon the regularity of a BIOS
> >> interrupt. As you might imagine, the "regularity" of an
> >> occuring (and being promptly handled) could certainly be
> >> any number of factors in the computer's run-time environment.
> >> If your clock is losing a lot of time WHILE THE COMPUTER IS
> >> then there are probably some processes you have invoked that
> >> slowing down the clock.
> >> It could be that your CPU is loaded up to the gills much of
> >> by all the stuff you are running simultaneously. If that's
> >> problem, you need to unburden it by closing any unnecessary
> >> apps/processes/ services. Or maybe it's just time to upgrade
> >> computer to something a lot faster and more capable,
> >> can keep up with all the stuff you're wanting it to do at
> >> time. :-)
> >> There is actually a fair amount of stuff available online
> >> this. Google "RTC losing time" or similar, and do some
> >> Bill W5VWO
> >> ----- Original Message -----
> >> *From:* Mike Miller <mailto:mike. kc9doa@.. .>
> >> *To:* wsjtgroup@yahoogrou ps.com
> >> <mailto:wsjtgroup@yahoogrou ps.com>
> >> *Sent:* Tuesday, September 02, 2008 4:04 PM
> >> *Subject:* [wsjtgroup] Clock sync
> >> My computer's clock loses about .175 seconds per minute.
> >> more than normal for a PC?
> >> I have Dimension 4 correcting the time every 2 minutes
> >> seems like an unnecessary load on the time server. Is
> >> way to reduce the clock error? Is there a program that
> >> apply a correction factor locally and reduce the need
> >> time server?
> >> Mike kc9doa
> > ------------ --------- --------- ------
> > To unsubscribe, send an email to:
> > wsjtgroup-unsubscri be@yahoogroups. com
> > Activity Periods http://www.ykc. com/wa5ufh/
> > NAHSMS Contest Page http://www.ykc. com/wa5ufh/ Rally/NAHSMS. htm
> > Logging Indicator/Activity
> > :http://baseportal. com/cgi-bin/ baseportal. pl?
htx=/randy_tipton/ Test%20(Activity %20Database) /Meteor_Scatter_ Reports
> > Yahoo! Groups Links
- << Previous post in topic Next post in topic >>