Loading ...
Sorry, an error occurred while loading the content.
 

Re: [wpmac] SheepShaver freezes on start up! Help!!

Expand Messages
  • George B. Richardson
    Thanks for the response. I have RAM set at 512 MB. That s twice the recommendation in the installation PDF. I increased it to 1024, with the same result.
    Message 1 of 7 , May 2, 2008
      Thanks for the response.

      I have RAM set at 512 MB. That's twice the recommendation in the
      installation PDF. I increased it to 1024, with the same result.

      George Richardson



      At 2:36 PM +0100 5/2/08, David Barnett wrote:
      >I wonder if the RAM size of the Sheepshaver virtual Mac has become too small?
      >David Barnett, Ph.D
      >
      >
      >
      >On Thu, May 1, 2008 at 7:19 PM, George B. Richardson
      ><<mailto:gbr%40gbr-law.com>gbr@...> wrote:
      >
      >>MBP, OS 10.5.2, 2.4 GHz Intel Core 2 Duo, 4 GB SDRAM. I desperately
      >>need to do my billing, which only runs on SheepShaver.
      >>
      >>SheepShaver has been installed and has been working fine for over 6
      >>months. Yesterday, went to open it and it hangs at the point where
      >>the SheepShaver icon and the word "Window" are in the Apple Menubar.
      >>
      >>Tried restoring back-ups from days before any problems had shown up
      >>from TimeMachine . Restarted SheepShaver with same result.
      >>
      >>Physically disconnected every external drive [each of which has
      >>backups of SheepShaver], and restarted. Removed from my HD
      >>everything about which I know that involves SheepShaver
      >>[SheepShaver HD, SheepShaver application, SheepShaver preferences,
      >>Basiliskll keycodes, Mac OS ROM, Print&PDF Folder Items.scpt,
      >>WordPerfect.mdimporter, and any alias].
      >>
      >>Emptied trash and restarted. Downloaded SS-WP 1.1 distribution
      >>folder [beautiful job - Thank you John!!] Printed out the Install
      >>ReadMe. Religiously followed every step.
      >>
      >>After the restart, tried to open SheepShaver application. Got the
      >>expanding icon and then the exact same hard freeze at the point
      >>when the Apple Menubar has the SheepShaver icon and the word
      >>"Window" [I know I'm being redundant - I figure too much
      >>information can be edited out].
      >>
      >>Anyway, I'm at a total loss. Please help as soon as possible!
      >>
      >>Thank you, everyone!!
      >>
      >>George Richardson

      --
      <:>:<:>:<:>:<:>:<:>:<:>:<:>:<:>:<:>:<:>:<:>:<:>:<:>:<:>:<:>:<:>:<:>:<:>
      George B. Richardson PC; 650.324.4801
      Mediation and Collaborative Professional
      Certified as a Specialist in Family Law by the
      California State Bar Board of Legal Specialization

      [Non-text portions of this message have been removed]
    • George B. Richardson
      Thanks extra much! That work around worked! ;-) I m a happy camper. Sorry for this long post, but there s still a problem, and I wanted to get as much
      Message 2 of 7 , May 2, 2008
        Thanks extra much! That work around worked! ;-) I'm a happy camper.

        Sorry for this long post, but there's still a problem, and I wanted
        to get as much information down as possible. Problem: the 500 MB dmg
        that is included in the WP download is too small. I need to have
        about 1.5 GB [the size of the dmg that I have been using]. I was able
        to take the 500 MB dmg and, with Disk Utility, expand the image.
        However, when I opened the dmg file, the SheepShaver file that
        mounted was still only 500MB.

        Said another way: when I got Info on the closed dmg that I had
        expanded, it showed that it was 1.5GB. When I double-clicked on that
        dmg file, it opened and mounted "SheepShaver". However, when I got
        Info on the mounted "SheepShave" file, it was still only 500MB. When
        I opened "SheepShaver", it would not take accept stuff that I wanted
        to move in because there was not enough room.

        When I opened Disk Utility with "SheepShaver" mounted, it would not
        allow me to expand the 500 MB "SheepShaver" image.

        I created a larger dmg, but when I copied over the contents of the
        500 MB to the dmg that I created, SheepShaver couldn't find a System
        Folder. I force quit SheepShaver and inserted my OS 8.5 Install Disk.
        Upon restart with the larger dmg, it started up with the 8.5 Install
        Disk just fine, but the installation of OS 8.5 failed. It said it
        failed because it couldn't update and then closed down.

        Further thoughts from anyone?

        George Richardson


        At 5:19 PM +0000 5/2/08, thomasbriant wrote:
        >George:
        >
        >I would suggest setting up a new user account, installing SS-WP, and
        >seeing if that fixes your problems.
        >
        >[...snip...]
        >
        >(4) Please tell me if this worked. It worked for me when Apple Mail
        >went down for me and wouldn't send mail. I used my other identity
        >and went back to work e-mailing people.
        >
        >[...snip...]
        >
        >Tom Briant
        >
        >
        >
        >--- In
        ><mailto:wordperfectmac%40yahoogroups.com>wordperfectmac@yahoogroups.com,
        >"George B. Richardson" <gbr@...> wrote:
        >> MBP, OS 10.5.2, 2.4 GHz Intel Core 2 Duo, 4 GB SDRAM. I
        >>desperately need to do my billing, which only runs on SheepShaver.
        >>
        >>SheepShaver has been installed and has been working fine for over 6
        >>months. Yesterday, went to open it and it hangs at the point where
        >>the SheepShaver icon and the word "Window" are in the Apple Menubar.
        >>
        >>Tried restoring back-ups from days before any problems had shown up
        >>from TimeMachine . Restarted SheepShaver with same result.
        >>
        >>Physically disconnected every external drive [each of which has
        >>backups of SheepShaver], and restarted. Removed from my HD
        >>everything about which I know that involves SheepShaver
        >>[SheepShaver HD, SheepShaver application, SheepShaver preferences,
        >>Basiliskll keycodes, Mac OS ROM, Print&PDF Folder Items.scpt,
        >>WordPerfect.mdimporter, and any alias].
        >>
        >>Emptied trash and restarted. Downloaded SS-WP 1.1 distribution
        >>folder [beautiful job - Thank you John!!] Printed out the Install
        >>ReadMe. Religiously followed every step.
        >>
        >>After the restart, tried to open SheepShaver application. Got the
        >>expanding icon and then the exact same hard freeze at the point
        >>when the Apple Menubar has the SheepShaver icon and the word
        >>"Window" [I know I'm being redundant - I figure too much
        >>information can be edited out].
        >>
        >>Anyway, I'm at a total loss. Please help as soon as possible!
        >>
        >>Thank you, everyone!!
        >>
        >>George Richardson

        --
        <:>:<:>:<:>:<:>:<:>:<:>:<:>:<:>:<:>:<:>:<:>:<:>:<:>:<:>:<:>:<:>:<:>:<:>
        George B. Richardson PC; 650.324.4801
        Mediation and Collaborative Professional
        Certified as a Specialist in Family Law by the
        California State Bar Board of Legal Specialization

        [Non-text portions of this message have been removed]
      Your message has been successfully submitted and would be delivered to recipients shortly.