Loading ...
Sorry, an error occurred while loading the content.

Re: dutch holland modified rules

Expand Messages
  • troy t
    income for dixon drivers just went up!!
    Message 1 of 6 , Mar 1, 2010
    • 0 Attachment
      income for dixon drivers just went up!!

      --- In west_coast_derby_gallery@yahoogroups.com, rudy russo <rudyrusso711@...> wrote:
      >
      >
      > IRON CARS!!!! Lapoint, Baumbauer, Guthrie, Ogilthorpe, BRING those cars back to life!!!!!!!!!!
      >
      >
      > To: west_coast_derby_gallery@yahoogroups.com
      > From: orlandderbygod11@...
      > Date: Sun, 28 Feb 2010 21:28:22 -0800
      > Subject: Re: [west_coast_derby_gallery] dutch holland modified rules
      >
      >
      >
      >
      >
      >
      > sounds like run what ya brung to me im bringing the iron car back to life
      >
      >
      >
      >
      >
      >
      >
      > From: d s <ruumple@...>
      > To: west_coast_derby_gallery@yahoogroups.com
      > Sent: Sun, February 28, 2010 9:04:16 PM
      > Subject: Re: [west_coast_derby_gallery] dutch holland modified rules
      >
      >
      >
      >
      >
      >
      > rule #5 damn I only have new inner tubes guess I can't run
      >
      >
      >
      >
      >
      >
      > From: Ron <captain93ron@ yahoo.com>
      > To: west_coast_derby_ gallery@yahoogro ups.com
      > Sent: Sun, February 28, 2010 8:06:49 PM
      > Subject: [west_coast_ derby_gallery] dutch holland modified rules
      >
      >
      >
      > 2010 MODIFIED CAR RULES
      > OPEN TO ANY TWO WHEEL DRIVE CARS. NO TRUCKS, COMMERCIAL VEHICLES, LIMOS, HEARSES,
      > CONVERTIBLES, VANS OR FOREIGN TYPE CARS ALLOWED.
      > 1. MUST REMOVE ALL GLASS, ALL CHROME, HEADLIGHT AND TAILLIGHT RINGS, GRILLS, CLEARANCE
      > LIGHTS, ROOF RACKS, DOOR HANDLES, ALL FLAMMABLE MATERIALS AND ALL SEATS, BUT FRONT
      > SEAT BEFORE BRINGING THE VEHICLE INTO THE FAIRGROUNDS.
      > 2. MATERIAL SIZES, UNLESS SPECIFIED IN RULE ARE AS FOLLOWS: CHAINS 1/2", BOLTS 3/4" , WELDING
      > FILLER 1/2" REBAR OR 1/4 "X 2" FLAT STOCK, AND WASHERS 3". ALL ARE MAXIMUM SIZES.
      > 3. CAR NUMBERS MUST BE MINIMUM 24" IN HEIGHT AND PAINTED ON BOTH SIDES AND TOP OF CAR.
      > ALWAYS USE A REALLY DIFFERENT COLOR OF PAINT FROM THE COLOR OF YOUR CAR. BRING PAINT OR
      > COLORED TAPE, JUST IN CASE. NO OBSCENITIES PAINTED ANWHERE ON CARS. DERBIES ARE A FAMILY
      > SHOW…
      > 4. GAS TANKS MUST BE A SAFE CONTAINER AND MADE OF STEEL, EXAMPLE: JEEP CAN, BOAT TANK
      > AND BE APPROVED BY THE OFFICIALS. NEW TANK IS TO BE INSTALLED FORWARD OF REAR AXLE
      > BEHIND THE DRIVER SEAT. GAS TANKS MUST BE SECURELY PLACED, BOLTED SOLIDED AND
      > CAPPED. STOCK GAS TANKS MUST BE REMOVED FROM THE CAR. NO ELECTRICAL OR PRESSURE TYPE
      > FUEL SYSTEMS. EXPECTION: CARS THAT ARE EQUIPPED WITH FUEL INJECTION SYSTEMS THAT
      > HAVE TO RUN WITH ELECTRICAL FUEL PUMPS, REQUIRES A KILL-SWITCH ABOVE STEERING
      > COLUMN IN WINDSHIELD AREA. MUST BE PAINTED IN A BRIGHT COLOR FOR EASY IDENIFICATION.
      > GAS OR DIESEL ONLY. NO ALCOHOL FUELS. HOLES MUST BE MADE IN THE FLOORBOARD AROUND
      > THE GAS TANK FOR POSSIBLE SPILLAGE.
      > 5. BATTERY MUST BE RELOCATED TO FRONT PASSENGER FLOORBOARD AND COVERED WITH OLD
      > INNER TUBE TO PROTECT THE DRIVER. IT MUST BE BOLTED IN SOLID. NO RESTRICTION ON BATTERY
      > SIZE. NO PLASTIC CRATES OR WOODEN BOXES. ANGLE IRON FRAME IS BEST. NO PLUMBERS TAPE.
      > 6. MANDATORY BRACING: SIDE BARS FROM DASH TO 1" FORWARD OF REAR WHEEL WELL. (3) CROSS
      > BARS, AT DASH, BEHIND DRIVER AND AT REAR WHEEL WELL. SIDE BARS AND CROSS BARS MUST BE
      > CONNECTED BY WELDING OR BOLTED. SIDE BARS 4" X 3/8" STOCK MINIMUM AND CROSS BARS
      > MINIMUM 2" PIPE, OR SQUARE TUBING. SCHEDULE #40 MINIMUM. SEE ATTACHED DRAWING.
      > DRIVERS DOOR MAY HAVE BRACING TO FLOORBOARD, NOT FRAME, PASSENGER SIDE MAY HAVE A
      > TOTAL OF 8" OF BRACING TO FLOORBOARD. SEE ATTACHMENT.
      > 7. MANDATORY: WINDSHIELD BRACES (2) FROM TOP OF OPENING TO BOTTOM OF OPENING TO
      > PREVENT HOOD FROM ENTERING CAR. REAR WINDOW OPTIONAL, SEDANS ONLY.
      > 8. BUMPER HEIGHTS, FRONT AND REAR, CAN NOT BE HIGHER THAN 20" MEASURED FROM THE
      > GROUND TO THE BOTTOM OF BUMPER. CARS MAY BE RAISED TO THIS HEIGHT, BUT WILL BE
      > CHECKED AT INSPECTION AND UPON ENTERING THE ARENA. USED CARS EXCLUDED FROM THIS
      > RULE.
      > 9. TRANSMISSION MUST HAVE OVERFLOW DRAIN INSTALLED ON DIP STICK TUBE, AWAY FROM
      > EXHAUST.
      > 10. BUMPER MAY BE WELDED TO BUMPER BRACKETS. BUMPER BRACKETS MAY BE WELDED TO
      > FRAMES. BUMPER SEAMS MAY BE WELDED, NO FILLERS 5-MPH BUMPERS MAY BE USED ON ALL
      > CARS. HOMEMADE BRACKETS NOT TO EXCEED 14" X 4" X ½". NO WELDING BODY TO BUMPER.
      > 11. ENGINES MAY BE CHAINED, BOLTED OR WELDED TO FRAME. NO ENGINE MOUNTS FORWARD OF
      > ENGINE BLOCK. 4" MAXIMUM MOUNTS. ANYTHING OVER WILL BE ADDED TO OVERALL REPAIRS.
      > 12. ENGINE MUST REMAIN IN STOCK POSITION. NO CUTTING OF FIREWALL FOR ENGINE SWAPS OR SET
      > BACK. YOU MAY CUT MAXIMUM OF A 12" X 12" HOLE IN FIREWALL TO RELIEVE DISTRIBUTOR
      > ROLLBACK. COVER HOLES.
      > 13. RADIATORS, IF USED, MUST BE IN STOCK LOCATION.
      > 14. ALL CARS MUST HAVE AN ENGINE AIR CLEANER.
      > 15. DOORS MUST BE WELDED AND/OR CHAINED SHUT; REFER TO RULE #3 FOR SIZES.
      > 16. ADDING FLAT METAL TO TOP OF DOOR'S OK, REFER TO RULE #3 FOR SIZES.
      > 17. TRUCK LIDS MUST BE CHAINED, BOLTED OR WELDED. DO NOT MIX METHODS: REFER TO RULE #3
      > FOR SIZES.
      > 18. WAGON DECK LIDS AND TAILGATES MUST BE CHAINED, BOLTED OR WELDED. DO NOT MIX
      > METHODS. REFER TO RULE #3 FOR SIZES. NO DECK LIDS WELDED FORWARD OF REAR WHEEL
      > WELLS.
      > 19. HOODS MUST BE CHAINED OR BOLTED ALL FOUR CORNERS. GUSSET PLATES, 6" MAXIMUM.
      > WASHERS ON HOOD 6" MAXIMUM. HOLE 12" X 12" MUST BE CUT OUT OF HOOD OVER CARBURETOR
      > FOR FIRE SUPPRESSION.
      > 20. SEAT BELTS ARE MANDATORY. FRONT SEAT MAY BE BOLTED OR WELDED DOWN. BUCKET SEAT
      > ALLOWED.
      > 21. BODY BOLTS MAY BE CHANGED. MAXIMUM SIZE 3/4" BOLT WITH 3" WASHER. BODY BOLTS MUST
      > REMAIN IN STOCK POSITION.
      > 22. SPRING CLAMPS MAY BE USED. FOR PER SPRING 2" WIDE ONLY.
      > 23. LEAF TYPE SPRINGS MAY BE SHORTENED AND WELDED AT TOP LEAF BY MAXIMUM 12". SHACKLES
      > MAY BE RE-HUNG, 3" SHACKLES MAXIMUM.
      > 24. NO LARGE HOLES IN FIREWALL. HOLES MUST BE COVERED.
      > 25. NO WELDING FRAME HOLES.
      > 26. TIRES MUST BE AUTOMOTIVE TYPE, MAXIMUM 16" WHEEL SIZE, NO AGGRESSIVE TIRES ON DRIVE
      > AXELS. AIR ONLY!!
      > OPTIONAL VEHICLE SPECIFICATIONS
      > 1. MUFFLERS MAY BE REMOVED.
      > 2. LOCKED REAR-ENDS.
      > 3. FENDERS MAY BE CUT AWAY FROM WHEELS.
      > 4. TRANSMISSION COOLER, IF USED, MUST BE COVERED.
      > 5. BUMPER MAY BE TRIMMED
      > 6. WELDED DOWN A-ARMS ARE ALLOWED. NO REINFORCEMENT OF A-ARMS.
      > 7. ONE A/C CONDENSER ALLOWED.
      > 8. FRAME SEAMS MAY BE WELDED. NO FILLER ROD. NO ADDING WASHERS. NO FILLING FRAME
      > HOLES. ALL FRAMEBRACKETS MAY BE WELDED IF ALTERED ENTIRE BRACKET WILL BE ADDED
      > TO OVERALL REPAIR MEASUREMENT.
      > 9. CHAIN MAY BE WRAPPED FROM REAR-END TO FRAME. ONE EACH SIDE. NO WELDING
      > 10. 2" FRONT KICKER-BARS MAY BE INSTALLED ON BOTH SIDES FROM DASH BARS TO TOP OF
      > FRAME. BARS MUST BE INSTALLED REAR OF A-FRAME MOUNTS 2" REAR KICKERS MAY ALSO BE
      > INSTALLED FROM REAR CROSS BAR TO FRAME, FORWARD OF REAR AXEL. ALL KICKERS MUST
      > BE INSTALLED ON TOP OF FRAME ONLY 4" CONTACT TO FRAME, MAXIMUM. (DON'T INSTALL
      > INSIDE FRAME)
      > 11. FRONT FENDERS MAY BE WELDED TO FRAME FORWARD A A-FRAME, WELDED AREA WILL BE
      > ADDED TO TOTAL REPAIR.
      > 12. 12" FRAME REPAIR ALLOWED PER FRAME RAIL NEW AND USED CARS.
      >
      >
      >
      >
      >
      >
      >
      >
      >
      > _________________________________________________________________
      > Hotmail: Powerful Free email with security by Microsoft.
      > http://clk.atdmt.com/GBL/go/201469230/direct/01/
      >
    • Jason
      any idea where the modified will run? i heard compact 1 shot at sac county fair and powder puff 1 shot sunday at napa.
      Message 2 of 6 , Mar 1, 2010
      • 0 Attachment
        any idea where the modified will run? i heard compact 1 shot at sac county fair and powder puff 1 shot sunday at napa.
        --- In west_coast_derby_gallery@yahoogroups.com, "troy t" <troytagvtown@...> wrote:
        >
        > income for dixon drivers just went up!!
        >
        > --- In west_coast_derby_gallery@yahoogroups.com, rudy russo <rudyrusso711@> wrote:
        > >
        > >
        > > IRON CARS!!!! Lapoint, Baumbauer, Guthrie, Ogilthorpe, BRING those cars back to life!!!!!!!!!!
        > >
        > >
        > > To: west_coast_derby_gallery@yahoogroups.com
        > > From: orlandderbygod11@
        > > Date: Sun, 28 Feb 2010 21:28:22 -0800
        > > Subject: Re: [west_coast_derby_gallery] dutch holland modified rules
        > >
        > >
        > >
        > >
        > >
        > >
        > > sounds like run what ya brung to me im bringing the iron car back to life
        > >
        > >
        > >
        > >
        > >
        > >
        > >
        > > From: d s <ruumple@>
        > > To: west_coast_derby_gallery@yahoogroups.com
        > > Sent: Sun, February 28, 2010 9:04:16 PM
        > > Subject: Re: [west_coast_derby_gallery] dutch holland modified rules
        > >
        > >
        > >
        > >
        > >
        > >
        > > rule #5 damn I only have new inner tubes guess I can't run
        > >
        > >
        > >
        > >
        > >
        > >
        > > From: Ron <captain93ron@ yahoo.com>
        > > To: west_coast_derby_ gallery@yahoogro ups.com
        > > Sent: Sun, February 28, 2010 8:06:49 PM
        > > Subject: [west_coast_ derby_gallery] dutch holland modified rules
        > >
        > >
        > >
        > > 2010 MODIFIED CAR RULES
        > > OPEN TO ANY TWO WHEEL DRIVE CARS. NO TRUCKS, COMMERCIAL VEHICLES, LIMOS, HEARSES,
        > > CONVERTIBLES, VANS OR FOREIGN TYPE CARS ALLOWED.
        > > 1. MUST REMOVE ALL GLASS, ALL CHROME, HEADLIGHT AND TAILLIGHT RINGS, GRILLS, CLEARANCE
        > > LIGHTS, ROOF RACKS, DOOR HANDLES, ALL FLAMMABLE MATERIALS AND ALL SEATS, BUT FRONT
        > > SEAT BEFORE BRINGING THE VEHICLE INTO THE FAIRGROUNDS.
        > > 2. MATERIAL SIZES, UNLESS SPECIFIED IN RULE ARE AS FOLLOWS: CHAINS 1/2", BOLTS 3/4" , WELDING
        > > FILLER 1/2" REBAR OR 1/4 "X 2" FLAT STOCK, AND WASHERS 3". ALL ARE MAXIMUM SIZES.
        > > 3. CAR NUMBERS MUST BE MINIMUM 24" IN HEIGHT AND PAINTED ON BOTH SIDES AND TOP OF CAR.
        > > ALWAYS USE A REALLY DIFFERENT COLOR OF PAINT FROM THE COLOR OF YOUR CAR. BRING PAINT OR
        > > COLORED TAPE, JUST IN CASE. NO OBSCENITIES PAINTED ANWHERE ON CARS. DERBIES ARE A FAMILY
        > > SHOW…
        > > 4. GAS TANKS MUST BE A SAFE CONTAINER AND MADE OF STEEL, EXAMPLE: JEEP CAN, BOAT TANK
        > > AND BE APPROVED BY THE OFFICIALS. NEW TANK IS TO BE INSTALLED FORWARD OF REAR AXLE
        > > BEHIND THE DRIVER SEAT. GAS TANKS MUST BE SECURELY PLACED, BOLTED SOLIDED AND
        > > CAPPED. STOCK GAS TANKS MUST BE REMOVED FROM THE CAR. NO ELECTRICAL OR PRESSURE TYPE
        > > FUEL SYSTEMS. EXPECTION: CARS THAT ARE EQUIPPED WITH FUEL INJECTION SYSTEMS THAT
        > > HAVE TO RUN WITH ELECTRICAL FUEL PUMPS, REQUIRES A KILL-SWITCH ABOVE STEERING
        > > COLUMN IN WINDSHIELD AREA. MUST BE PAINTED IN A BRIGHT COLOR FOR EASY IDENIFICATION.
        > > GAS OR DIESEL ONLY. NO ALCOHOL FUELS. HOLES MUST BE MADE IN THE FLOORBOARD AROUND
        > > THE GAS TANK FOR POSSIBLE SPILLAGE.
        > > 5. BATTERY MUST BE RELOCATED TO FRONT PASSENGER FLOORBOARD AND COVERED WITH OLD
        > > INNER TUBE TO PROTECT THE DRIVER. IT MUST BE BOLTED IN SOLID. NO RESTRICTION ON BATTERY
        > > SIZE. NO PLASTIC CRATES OR WOODEN BOXES. ANGLE IRON FRAME IS BEST. NO PLUMBERS TAPE.
        > > 6. MANDATORY BRACING: SIDE BARS FROM DASH TO 1" FORWARD OF REAR WHEEL WELL. (3) CROSS
        > > BARS, AT DASH, BEHIND DRIVER AND AT REAR WHEEL WELL. SIDE BARS AND CROSS BARS MUST BE
        > > CONNECTED BY WELDING OR BOLTED. SIDE BARS 4" X 3/8" STOCK MINIMUM AND CROSS BARS
        > > MINIMUM 2" PIPE, OR SQUARE TUBING. SCHEDULE #40 MINIMUM. SEE ATTACHED DRAWING.
        > > DRIVERS DOOR MAY HAVE BRACING TO FLOORBOARD, NOT FRAME, PASSENGER SIDE MAY HAVE A
        > > TOTAL OF 8" OF BRACING TO FLOORBOARD. SEE ATTACHMENT.
        > > 7. MANDATORY: WINDSHIELD BRACES (2) FROM TOP OF OPENING TO BOTTOM OF OPENING TO
        > > PREVENT HOOD FROM ENTERING CAR. REAR WINDOW OPTIONAL, SEDANS ONLY.
        > > 8. BUMPER HEIGHTS, FRONT AND REAR, CAN NOT BE HIGHER THAN 20" MEASURED FROM THE
        > > GROUND TO THE BOTTOM OF BUMPER. CARS MAY BE RAISED TO THIS HEIGHT, BUT WILL BE
        > > CHECKED AT INSPECTION AND UPON ENTERING THE ARENA. USED CARS EXCLUDED FROM THIS
        > > RULE.
        > > 9. TRANSMISSION MUST HAVE OVERFLOW DRAIN INSTALLED ON DIP STICK TUBE, AWAY FROM
        > > EXHAUST.
        > > 10. BUMPER MAY BE WELDED TO BUMPER BRACKETS. BUMPER BRACKETS MAY BE WELDED TO
        > > FRAMES. BUMPER SEAMS MAY BE WELDED, NO FILLERS 5-MPH BUMPERS MAY BE USED ON ALL
        > > CARS. HOMEMADE BRACKETS NOT TO EXCEED 14" X 4" X ½". NO WELDING BODY TO BUMPER.
        > > 11. ENGINES MAY BE CHAINED, BOLTED OR WELDED TO FRAME. NO ENGINE MOUNTS FORWARD OF
        > > ENGINE BLOCK. 4" MAXIMUM MOUNTS. ANYTHING OVER WILL BE ADDED TO OVERALL REPAIRS.
        > > 12. ENGINE MUST REMAIN IN STOCK POSITION. NO CUTTING OF FIREWALL FOR ENGINE SWAPS OR SET
        > > BACK. YOU MAY CUT MAXIMUM OF A 12" X 12" HOLE IN FIREWALL TO RELIEVE DISTRIBUTOR
        > > ROLLBACK. COVER HOLES.
        > > 13. RADIATORS, IF USED, MUST BE IN STOCK LOCATION.
        > > 14. ALL CARS MUST HAVE AN ENGINE AIR CLEANER.
        > > 15. DOORS MUST BE WELDED AND/OR CHAINED SHUT; REFER TO RULE #3 FOR SIZES.
        > > 16. ADDING FLAT METAL TO TOP OF DOOR'S OK, REFER TO RULE #3 FOR SIZES.
        > > 17. TRUCK LIDS MUST BE CHAINED, BOLTED OR WELDED. DO NOT MIX METHODS: REFER TO RULE #3
        > > FOR SIZES.
        > > 18. WAGON DECK LIDS AND TAILGATES MUST BE CHAINED, BOLTED OR WELDED. DO NOT MIX
        > > METHODS. REFER TO RULE #3 FOR SIZES. NO DECK LIDS WELDED FORWARD OF REAR WHEEL
        > > WELLS.
        > > 19. HOODS MUST BE CHAINED OR BOLTED ALL FOUR CORNERS. GUSSET PLATES, 6" MAXIMUM.
        > > WASHERS ON HOOD 6" MAXIMUM. HOLE 12" X 12" MUST BE CUT OUT OF HOOD OVER CARBURETOR
        > > FOR FIRE SUPPRESSION.
        > > 20. SEAT BELTS ARE MANDATORY. FRONT SEAT MAY BE BOLTED OR WELDED DOWN. BUCKET SEAT
        > > ALLOWED.
        > > 21. BODY BOLTS MAY BE CHANGED. MAXIMUM SIZE 3/4" BOLT WITH 3" WASHER. BODY BOLTS MUST
        > > REMAIN IN STOCK POSITION.
        > > 22. SPRING CLAMPS MAY BE USED. FOR PER SPRING 2" WIDE ONLY.
        > > 23. LEAF TYPE SPRINGS MAY BE SHORTENED AND WELDED AT TOP LEAF BY MAXIMUM 12". SHACKLES
        > > MAY BE RE-HUNG, 3" SHACKLES MAXIMUM.
        > > 24. NO LARGE HOLES IN FIREWALL. HOLES MUST BE COVERED.
        > > 25. NO WELDING FRAME HOLES.
        > > 26. TIRES MUST BE AUTOMOTIVE TYPE, MAXIMUM 16" WHEEL SIZE, NO AGGRESSIVE TIRES ON DRIVE
        > > AXELS. AIR ONLY!!
        > > OPTIONAL VEHICLE SPECIFICATIONS
        > > 1. MUFFLERS MAY BE REMOVED.
        > > 2. LOCKED REAR-ENDS.
        > > 3. FENDERS MAY BE CUT AWAY FROM WHEELS.
        > > 4. TRANSMISSION COOLER, IF USED, MUST BE COVERED.
        > > 5. BUMPER MAY BE TRIMMED
        > > 6. WELDED DOWN A-ARMS ARE ALLOWED. NO REINFORCEMENT OF A-ARMS.
        > > 7. ONE A/C CONDENSER ALLOWED.
        > > 8. FRAME SEAMS MAY BE WELDED. NO FILLER ROD. NO ADDING WASHERS. NO FILLING FRAME
        > > HOLES. ALL FRAMEBRACKETS MAY BE WELDED IF ALTERED ENTIRE BRACKET WILL BE ADDED
        > > TO OVERALL REPAIR MEASUREMENT.
        > > 9. CHAIN MAY BE WRAPPED FROM REAR-END TO FRAME. ONE EACH SIDE. NO WELDING
        > > 10. 2" FRONT KICKER-BARS MAY BE INSTALLED ON BOTH SIDES FROM DASH BARS TO TOP OF
        > > FRAME. BARS MUST BE INSTALLED REAR OF A-FRAME MOUNTS 2" REAR KICKERS MAY ALSO BE
        > > INSTALLED FROM REAR CROSS BAR TO FRAME, FORWARD OF REAR AXEL. ALL KICKERS MUST
        > > BE INSTALLED ON TOP OF FRAME ONLY 4" CONTACT TO FRAME, MAXIMUM. (DON'T INSTALL
        > > INSIDE FRAME)
        > > 11. FRONT FENDERS MAY BE WELDED TO FRAME FORWARD A A-FRAME, WELDED AREA WILL BE
        > > ADDED TO TOTAL REPAIR.
        > > 12. 12" FRAME REPAIR ALLOWED PER FRAME RAIL NEW AND USED CARS.
        > >
        > >
        > >
        > >
        > >
        > >
        > >
        > >
        > >
        > > _________________________________________________________________
        > > Hotmail: Powerful Free email with security by Microsoft.
        > > http://clk.atdmt.com/GBL/go/201469230/direct/01/
        > >
        >
      Your message has been successfully submitted and would be delivered to recipients shortly.