Loading ...
Sorry, an error occurred while loading the content.

smothing bumper (bolts)

Expand Messages
  • bond073
    i wanted to shave off the head of the bolt trying to figure out the best way 1.weld a heavy washer on the back then grind off the head. then weld it from the
    Message 1 of 2 , Mar 9, 2008
    • 0 Attachment
      i wanted to shave off the head of the bolt
      trying to figure out the best way
      1.weld a heavy washer on the back then grind off the head.
      then weld it from the front and smooth out.

      2. cut the head, put nut and bolt on it put it in the bumper then weld
      the face. then weld the washer on the back.

      the first way i have seen that a few years later it rusted out

      what should i use an arc with 7014 rod?

      any suggestions?
      thank you
    • bca1904
      ... weld
      Message 2 of 2 , Mar 11, 2008
      • 0 Attachment
        --- In welding_group@yahoogroups.com, "bond073" <bond073@...> wrote:
        >
        > i wanted to shave off the head of the bolt
        > trying to figure out the best way
        > 1.weld a heavy washer on the back then grind off the head.
        > then weld it from the front and smooth out.
        >
        > 2. cut the head, put nut and bolt on it put it in the bumper then
        weld
        > the face. then weld the washer on the back.
        >
        > the first way i have seen that a few years later it rusted out
        >
        > what should i use an arc with 7014 rod?
        >
        > any suggestions?
        > thank you
        > grind it off with a cuting wheel
      Your message has been successfully submitted and would be delivered to recipients shortly.