Loading ...
Sorry, an error occurred while loading the content.

webalizer 2.01.06 r03 win 2000 Problem

Expand Messages
  • eicke@neckar-alb-online.de
    Hello, installed webalizer in c: etc Made a webalizer.bat in c: etc ... webalizer -c c: etc webalizer.conf -D dns-data.txt ... Edited webalizer.conf: ... # #
    Message 1 of 3 , Feb 9, 2001
    • 0 Attachment
      Hello,

      installed webalizer in c:\etc

      Made a webalizer.bat in c:\etc

      looks like this:

      -----------------

      webalizer -c c:\etc\webalizer.conf -D dns-data.txt

      -----------------

      Edited webalizer.conf:

      here ist is:

      -----------------

      #
      # Sample Webalizer configuration file
      # Copyright 1997-2000 by Bradford L. Barrett (brad@...)
      #
      # Distributed under the GNU General Public License. See the
      # files "Copyright" and "COPYING" provided with the webalizer
      # distribution for additional information.
      #
      # This is a sample configuration file for the Webalizer (ver 2.01)
      # Lines starting with pound signs '#' are comment lines and are
      # ignored. Blank lines are skipped as well. Other lines are
      considered
      # as configuration lines, and have the form "ConfigOption Value"
      where
      # ConfigOption is a valid configuration keyword, and Value is the
      value
      # to assign that configuration option. Invalid keyword/values are
      # ignored, with appropriate warnings being displayed. There must be
      # at least one space or tab between the keyword and its value.
      #
      # As of version 0.98, The Webalizer will look for a 'default'
      configuration
      # file named "webalizer.conf" in the current directory, and if not
      found
      # there, will look for "/etc/webalizer.conf".

      # LogFile defines the web server log file to use. If not specified
      # here or on on the command line, input will default to STDIN. If
      # the log filename ends in '.gz' (ie: a gzip compressed file), it will
      # be decompressed on the fly as it is being read.

      LogFile D:\home\4saisons\W3SVC3

      # LogType defines the log type being processed. Normally, the
      Webalizer
      # expects a CLF or Combined web server log as input. Using this
      option,
      # you can process ftp logs as well (xferlog as produced by wu-ftp and
      # others), or Squid native logs. Values can be 'clf', 'ftp'
      or 'squid',
      # with 'clf' the default.
      # JNH : new value 'iis' for IIS this tag let choice to webalizer to
      choice
      # between standard (default in IIS4) log format and W3C (default in
      IIS5)
      # webalizer make choice based upon name of Log (std begin with I and
      W3c with E)
      # you can mix in same folder both type of log, webalizer read all and
      make one
      # report,

      LogType iis

      # OutputDir is where you want to put the output files. This should
      # should be a full path name, however relative ones might work as
      well.
      # If no output directory is specified, the current directory will be
      used.

      OutputDir D:\home\4saisons\www\webalizer

      # HistoryName allows you to specify the name of the history file
      produced
      # by the Webalizer. The history file keeps the data for up to 12
      months
      # worth of logs, used for generating the main HTML page (index.html).
      # The default is a file named "webalizer.hist", stored in the
      specified
      # output directory. If you specify just the filename (without a
      path),
      # it will be kept in the specified output directory. Otherwise, the
      path
      # is relative to the output directory, unless absolute (leading /).

      HistoryName webalizer.hist

      # Incremental processing allows multiple partial log files to be used
      # instead of one huge one. Useful for large sites that have to rotate
      # their log files more than once a month. The Webalizer will save its
      # internal state before exiting, and restore it the next time run, in
      # order to continue processing where it left off. This mode also
      causes
      # The Webalizer to scan for and ignore duplicate records (records
      already
      # processed by a previous run). See the README file for additional
      # information. The value may be 'yes' or 'no', with a default
      of 'no'.
      # The file 'webalizer.current' is used to store the current state
      data,
      # and is located in the output directory of the program (unless
      changed
      # with the IncrementalName option below). Please read at least the
      section
      # on Incremental processing in the README file before you enable this
      option.

      Incremental yes

      # IncrementalName allows you to specify the filename for saving the
      # incremental data in. It is similar to the HistoryName option where
      the
      # name is relative to the specified output directory, unless an
      absolute
      # filename is specified. The default is a file
      named "webalizer.current"
      # kept in the normal output directory. If you don't
      specify "Incremental"
      # as 'yes' then this option has no meaning.

      IncrementalName webalizer.current

      # ReportTitle is the text to display as the title. The hostname
      # (unless blank) is appended to the end of this string (seperated with
      # a space) to generate the final full title string.
      # Default is (for english) "Usage Statistics for".

      ReportTitle Statistik von

      # HostName defines the hostname for the report. This is used in
      # the title, and is prepended to the URL table items. This allows
      # clicking on URL's in the report to go to the proper location in
      # the event you are running the report on a 'virtual' web server,
      # or for a server different than the one the report resides on.
      # If not specified here, or on the command line, webalizer will
      # try to get the hostname via a uname system call. If that fails,
      # it will default to "localhost".

      HostName 4saisons.de

      # HTMLExtension allows you to specify the filename extension to use
      # for generated HTML pages. Normally, this defaults to "html", but
      # can be changed for sites who need it (like for PHP embeded pages).

      #HTMLExtension html

      # PageType lets you tell the Webalizer what types of URL's you
      # consider a 'page'. Most people consider html and cgi documents
      # as pages, while not images and audio files. If no types are
      # specified, defaults will be used ('htm*', 'cgi' and HTMLExtension
      # if different for web logs, 'txt' for ftp logs).

      PageType htm*
      PageType cgi
      #PageType phtml
      #PageType php3
      #PageType pl

      # UseHTTPS should be used if the analysis is being run on a
      # secure server, and links to urls should use 'https://' instead
      # of the default 'http://'. If you need this, set it to 'yes'.
      # Default is 'no'. This only changes the behaviour of the 'Top
      # URL's' table.

      #UseHTTPS no

      # DNSCache specifies the DNS cache filename to use for reverse DNS
      lookups.
      # This file must be specified if you wish to perform name lookups on
      any IP
      # addresses found in the log file. If an absolute path is not given
      as
      # part of the filename (ie: starts with a leading '/'), then the name
      is
      # relative to the default output directory. See the DNS.README file
      for
      # additional information.

      #DNSCache dns_cache.db

      # DNSChildren allows you to specify how many "children" processes are
      # run to perform DNS lookups to create or update the DNS cache file.
      # If a number is specified, the DNS cache file will be created/updated
      # each time the Webalizer is run, immediately prior to normal
      processing,
      # by running the specified number of "children" processes to perform
      # DNS lookups. If used, the DNS cache filename MUST be specified as
      # well. The default value is zero (0), which disables DNS cache file
      # creation/updates at run time. The number of children processes to
      # run may be anywhere from 1 to 100, however a large number may effect
      # normal system operations. Reasonable values should be between 5 and
      # 20. See the DNS.README file for additional information.

      #DNSChildren 0

      # HTMLPre defines HTML code to insert at the very beginning of the
      # file. Default is the DOCTYPE line shown below. Max line length
      # is 80 characters, so use multiple HTMLPre lines if you need more.

      #HTMLPre <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0
      Transitional//EN">

      # HTMLHead defines HTML code to insert within the <HEAD></HEAD>
      # block, immediately after the <TITLE> line. Maximum line length
      # is 80 characters, so use multiple lines if needed.

      #HTMLHead <META NAME="author" CONTENT="The Webalizer">

      # HTMLBody defined the HTML code to be inserted, starting with the
      # <BODY> tag. If not specified, the default is shown below. If
      # used, you MUST include your own <BODY> tag as the first line.
      # Maximum line length is 80 char, use multiple lines if needed.

      #HTMLBody <BODY BGCOLOR="#E8E8E8" TEXT="#000000" LINK="#0000FF"
      VLINK="#FF0000">

      # HTMLPost defines the HTML code to insert immediately before the
      # first <HR> on the document, which is just after the title and
      # "summary period"-"Generated on:" lines. If anything, this should
      # be used to clean up in case an image was inserted with HTMLBody.
      # As with HTMLHead, you can define as many of these as you want and
      # they will be inserted in the output stream in order of apperance.
      # Max string size is 80 characters. Use multiple lines if you need
      to.

      #HTMLPost <BR CLEAR="all">

      # HTMLTail defines the HTML code to insert at the bottom of each
      # HTML document, usually to include a link back to your home
      # page or insert a small graphic. It is inserted as a table
      # data element (ie: <TD> your code here </TD>) and is right
      # alligned with the page. Max string size is 80 characters.

      #HTMLTail <IMG SRC="msfree.png" ALT="100% Micro$oft free!">

      # HTMLEnd defines the HTML code to add at the very end of the
      # generated files. It defaults to what is shown below. If
      # used, you MUST specify the </BODY> and </HTML> closing tags
      # as the last lines. Max string length is 80 characters.

      #HTMLEnd </BODY></HTML>

      # The Quiet option suppresses output messages... Useful when run
      # as a cron job to prevent bogus e-mails. Values can be either
      # "yes" or "no". Default is "no". Note: this does not suppress
      # warnings and errors (which are printed to stderr).

      #Quiet no

      # ReallyQuiet will supress all messages including errors and
      # warnings. Values can be 'yes' or 'no' with 'no' being the
      # default. If 'yes' is used here, it cannot be overriden from
      # the command line, so use with caution. A value of 'no' has
      # no effect.

      #ReallyQuiet no

      # TimeMe allows you to force the display of timing information
      # at the end of processing. A value of 'yes' will force the
      # timing information to be displayed. A value of 'no' has no
      # effect.

      #TimeMe no

      # GMTTime allows reports to show GMT (UTC) time instead of local
      # time. Default is to display the time the report was generated
      # in the timezone of the local machine, such as EDT or PST. This
      # keyword allows you to have times displayed in UTC instead. Use
      # only if you really have a good reason, since it will probably
      # screw up the reporting periods by however many hours your local
      # time zone is off of GMT.

      #GMTTime no

      # Debug prints additional information for error messages. This
      # will cause webalizer to dump bad records/fields instead of just
      # telling you it found a bad one. As usual, the value can be
      # either "yes" or "no". The default is "no". It shouldn't be
      # needed unless you start getting a lot of Warning or Error
      # messages and want to see why. (Note: warning and error messages
      # are printed to stderr, not stdout like normal messages).

      #Debug no

      # FoldSeqErr forces the Webalizer to ignore sequence errors.
      # This is useful for Netscape and other web servers that cache
      # the writing of log records and do not guarentee that they
      # will be in chronological order. The use of the FoldSeqErr
      # option will cause out of sequence log records to be treated
      # as if they had the same time stamp as the last valid record.
      # Default is to ignore out of sequence log records.

      #FoldSeqErr no

      # VisitTimeout allows you to set the default timeout for a visit
      # (sometimes called a 'session'). The default is 30 minutes,
      # which should be fine for most sites.
      # Visits are determined by looking at the time of the current
      # request, and the time of the last request from the site. If
      # the time difference is greater than the VisitTimeout value, it
      # is considered a new visit, and visit totals are incremented.
      # Value is the number of seconds to timeout (default=1800=30min)

      #VisitTimeout 1800

      # IgnoreHist shouldn't be used in a config file, but it is here
      # just because it might be usefull in certain situations. If the
      # history file is ignored, the main "index.html" file will only
      # report on the current log files contents. Usefull only when you
      # want to reproduce the reports from scratch. USE WITH CAUTION!
      # Valid values are "yes" or "no". Default is "no".

      #IgnoreHist no

      # Country Graph allows the usage by country graph to be disabled.
      # Values can be 'yes' or 'no', default is 'yes'.

      #CountryGraph yes

      # DailyGraph and DailyStats allows the daily statistics graph
      # and statistics table to be disabled (not displayed). Values
      # may be "yes" or "no". Default is "yes".

      #DailyGraph yes
      #DailyStats yes

      # HourlyGraph and HourlyStats allows the hourly statistics graph
      # and statistics table to be disabled (not displayed). Values
      # may be "yes" or "no". Default is "yes".

      #HourlyGraph yes
      #HourlyStats yes

      # GraphLegend allows the color coded legends to be turned on or off
      # in the graphs. The default is for them to be displayed. This only
      # toggles the color coded legends, the other legends are not changed.
      # If you think they are hideous and ugly, say 'no' here :)

      #GraphLegend yes

      # GraphLines allows you to have index lines drawn behind the graphs.
      # I personally am not crazy about them, but a lot of people requested
      # them and they weren't a big deal to add. The number represents the
      # number of lines you want displayed. Default is 2, you can disable
      # the lines by using a value of zero ('0'). [max is 20]
      # Note, due to rounding errors, some values don't work quite right.
      # The lower the better, with 1,2,3,4,6 and 10 producing nice results.

      #GraphLines 2

      # The "Top" options below define the number of entries for each table.
      # Defaults are Sites=30, URL's=30, Referrers=30 and Agents=15, and
      # Countries=30. TopKSites and TopKURLs (by KByte tables) both default
      # to 10, as do the top entry/exit tables (TopEntry/TopExit). The top
      # search strings and usernames default to 20. Tables may be disabled
      # by using zero (0) for the value.

      #TopSites 30
      #TopKSites 10
      #TopURLs 30
      #TopKURLs 10
      #TopReferrers 30
      #TopAgents 15
      #TopCountries 30
      #TopEntry 10
      #TopExit 10
      #TopSearch 20
      #TopUsers 20

      # The All* keywords allow the display of all URL's, Sites, Referrers
      # User Agents, Search Strings and Usernames. If enabled, a seperate
      # HTML page will be created, and a link will be added to the bottom
      # of the appropriate "Top" table. There are a couple of conditions
      # for this to occur.. First, there must be more items than will fit
      # in the "Top" table (otherwise it would just be duplicating what is
      # already displayed). Second, the listing will only show those items
      # that are normally visable, which means it will not show any hidden
      # items. Grouped entries will be listed first, followed by individual
      # items. The value for these keywords can be either 'yes' or 'no',
      # with the default being 'no'. Please be aware that these pages can
      # be quite large in size, particularly the sites page, and seperate
      # pages are generated for each month, which can consume quite a lot
      # of disk space depending on the traffic to your site.

      #AllSites no
      #AllURLs no
      #AllReferrers no
      #AllAgents no
      #AllSearchStr no
      #AllUsers no

      # The Webalizer normally strips the string 'index.' off the end of
      # URL's in order to consolidate URL totals. For example, the URL
      # /somedir/index.html is turned into /somedir/ which is really the
      # same URL. This option allows you to specify additional strings
      # to treat in the same way. You don't need to specify 'index.' as
      # it is always scanned for by The Webalizer, this option is just to
      # specify _additional_ strings if needed. If you don't need any,
      # don't specify any as each string will be scanned for in EVERY
      # log record... A bunch f them will degrade performance. Also,
      # the string is scanned for anywhere in the URL, so a string of
      # 'home' would turn the URL /somedir/homepages/brad/home.html into
      # just /somedir/ which is probably not what was intended.

      #IndexAlias home.htm
      #IndexAlias homepage.htm

      # The Hide*, Group* and Ignore* and Include* keywords allow you to
      # change the way Sites, URL's, Referrers, User Agents and Usernames
      # are manipulated. The Ignore* keywords will cause The Webalizer to
      # completely ignore records as if they didn't exist (and thus not
      # counted in the main site totals). The Hide* keywords will prevent
      # things from being displayed in the 'Top' tables, but will still be
      # counted in the main totals. The Group* keywords allow grouping
      # similar objects as if they were one. Grouped records are displayed
      # in the 'Top' tables and can optionally be displayed in BOLD and/or
      # shaded. Groups cannot be hidden, and are not counted in the main
      # totals. The Group* options do not, by default, hide all the items
      # that it matches. If you want to hide the records that match (so
      just
      # the grouping record is displayed), follow with an identical Hide*
      # keyword with the same value. (see example below) In addition,
      # Group* keywords may have an optional label which will be displayed
      # instead of the keywords value. The label should be seperated from
      # the value by at least one 'white-space' character, such as a space
      # or tab.
      #
      # The value can have either a leading or trailing '*' wildcard
      # character. If no wildcard is found, a match can occur anywhere
      # in the string. Given a string "www.yourmama.com", the values "your",
      # "*mama.com" and "www.your*" will all match.
      # Your own site should be hidden

      #HideSite *mrunix.net
      #HideSite localhost

      # Your own site gives most referrals
      #HideReferrer mrunix.net/

      # This one hides non-referrers ("-" Direct requests)
      #HideReferrer Direct Request

      # Usually you want to hide these
      HideURL *.gif
      HideURL *.GIF
      HideURL *.jpg
      HideURL *.JPG
      HideURL *.png
      HideURL *.PNG
      HideURL *.ra

      # Hiding agents is kind of futile
      #HideAgent RealPlayer

      # You can also hide based on authenticated username
      #HideUser root
      #HideUser admin

      # Grouping options
      #GroupURL /cgi-bin/* CGI Scripts
      #GroupURL /images/* Images
      #GroupSite *.aol.com
      #GroupSite *.compuserve.com
      #GroupReferrer yahoo.com/ Yahoo!
      #GroupReferrer excite.com/ Excite
      #GroupReferrer infoseek.com/ InfoSeek
      #GroupReferrer webcrawler.com/ WebCrawler

      #GroupUser root Admin users
      #GroupUser admin Admin users
      #GroupUser wheel Admin users

      # The following is a great way to get an overall total
      # for browsers, and not display all the detail records.
      # (You should use MangleAgent to refine further...)

      #GroupAgent MSIE Micro$oft Internet Exploder
      #HideAgent MSIE
      #GroupAgent Mozilla Netscape
      #HideAgent Mozilla
      #GroupAgent Lynx* Lynx
      #HideAgent Lynx*

      # HideAllSites allows forcing individual sites to be hidden in the
      # report. This is particularly useful when used in conjunction
      # with the "GroupDomain" feature, but could be useful in other
      # situations as well, such as when you only want to display grouped
      # sites (with the GroupSite keywords...). The value for this
      # keyword can be either 'yes' or 'no', with 'no' the default,
      # allowing individual sites to be displayed.

      #HideAllSites no

      # The GroupDomains keyword allows you to group individual hostnames
      # into their respective domains. The value specifies the level of
      # grouping to perform, and can be thought of as 'the number of dots'
      # that will be displayed. For example, if a visiting host is named
      # cust1.tnt.mia.uu.net, a domain grouping of 1 will result in just
      # "uu.net" being displayed, while a 2 will result in "mia.uu.net".
      # The default value of zero disable this feature. Domains will only
      # be grouped if they do not match any existing "GroupSite" records,
      # which allows overriding this feature with your own if desired.

      #GroupDomains 0

      # The GroupShading allows grouped rows to be shaded in the report.
      # Useful if you have lots of groups and individual records that
      # intermingle in the report, and you want to diferentiate the group
      # records a little more. Value can be 'yes' or 'no', with 'yes'
      # being the default.

      #GroupShading yes

      # GroupHighlight allows the group record to be displayed in BOLD.
      # Can be either 'yes' or 'no' with the default 'yes'.

      #GroupHighlight yes

      # The Ignore* keywords allow you to completely ignore log records
      based
      # on hostname, URL, user agent, referrer or username. I hessitated in
      # adding these, since the Webalizer was designed to generate
      _accurate_
      # statistics about a web servers performance. By choosing to ignore
      # records, the accuracy of reports become skewed, negating why I wrote
      # this program in the first place. However, due to popular demand,
      here
      # they are. Use the same as the Hide* keywords, where the value can
      have
      # a leading or trailing wildcard '*'. Use at your own risk ;)

      #IgnoreSite bad.site.net
      #IgnoreURL /test*
      #IgnoreReferrer file:/*
      #IgnoreAgent RealPlayer
      #IgnoreUser root

      # The Include* keywords allow you to force the inclusion of log
      records
      # based on hostname, URL, user agent, referrer or username. They take
      # precidence over the Ignore* keywords. Note: Using Ignore/Include
      # combinations to selectivly process parts of a web site is _extremely
      # inefficent_!!! Avoid doing so if possible (ie: grep the records to a
      # seperate file if you really want that kind of report).

      # Example: Only show stats on Joe User's pages...
      #IgnoreURL *
      #IncludeURL ~joeuser*

      # Or based on an authenticated username
      #IgnoreUser *
      #IncludeUser someuser

      # The MangleAgents allows you to specify how much, if any, The
      Webalizer
      # should mangle user agent names. This allows several levels of
      detail
      # to be produced when reporting user agent statistics. There are six
      # levels that can be specified, which define different levels of
      detail
      # supression. Level 5 shows only the browser name (MSIE or Mozilla)
      # and the major version number. Level 4 adds the minor version number
      # (single decimal place). Level 3 displays the minor version to two
      # decimal places. Level 2 will add any sub-level designation (such
      # as Mozilla/3.01Gold or MSIE 3.0b). Level 1 will attempt to also add
      # the system type if it is specified. The default Level 0 displays
      the
      # full user agent field without modification and produces the greatest
      # amount of detail. User agent names that can't be mangled will be
      # left unmodified.

      #MangleAgents 0

      # The SearchEngine keywords allow specification of search engines and
      # their query strings on the URL. These are used to locate and report
      # what search strings are used to find your site. The first word is
      # a substring to match in the referrer field that identifies the
      search
      # engine, and the second is the URL variable used by that search
      engine
      # to define it's search terms.

      SearchEngine yahoo.com p=
      SearchEngine altavista.com q=
      SearchEngine google.com q=
      SearchEngine eureka.com q=
      SearchEngine lycos.com query=
      SearchEngine hotbot.com MT=
      SearchEngine msn.com MT=
      SearchEngine infoseek.com qt=
      SearchEngine webcrawler searchText=
      SearchEngine excite search=
      SearchEngine netscape.com search=
      SearchEngine mamma.com query=
      SearchEngine alltheweb.com query=
      SearchEngine northernlight.com qr=

      # The Dump* keywords allow the dumping of Sites, URL's, Referrers
      # User Agents, Usernames and Search strings to seperate tab delimited
      # text files, suitable for import into most database or spreadsheet
      # programs.

      # DumpPath specifies the path to dump the files. If not specified,
      # it will default to the current output directory. Do not use a
      # trailing slash ('/').

      #DumpPath /var/lib/httpd/logs

      # The DumpHeader keyword specifies if a header record should be
      # written to the file. A header record is the first record of the
      # file, and contains the labels for each field written. Normally,
      # files that are intended to be imported into a database system
      # will not need a header record, while spreadsheets usually do.
      # Value can be either 'yes' or 'no', with 'no' being the default.

      #DumpHeader no

      # DumpExtension allow you to specify the dump filename extension
      # to use. The default is "tab", but some programs are pickey about
      # the filenames they use, so you may change it here (for example,
      # some people may prefer to use "csv").

      #DumpExtension tab

      # These control the dumping of each individual table. The value
      # can be either 'yes' or 'no'.. the default is 'no'.

      #DumpSites no
      #DumpURLs no
      #DumpReferrers no
      #DumpAgents no
      #DumpUsers no
      #DumpSearchStr no

      # End of configuration file... Have a nice day!

      # begin of JNH mofications
      # new entry for Win32 release

      # NOUVELLE ENTREE pour les serveurs NT

      # nom de la page par defaut sur le serveur
      # replace file "Index" for unix systems by other name

      IndexPage default

      # name of folder to read all file inside ...

      # FolderLog C:\JnhDev\WebAlizer32\Exemple de Logs\IIS4.0\Log
      Standard\
      FolderLog c:\wa001\logiis\
      ExtentionLog log

      # when you use mix type of log in same folder, webalizer sort file
      for order by
      # name, but if begin of file file is mix sort didn't make work, then
      you can disable it
      # default is no

      # DisableSort yes


      # Name of file contain list of server to process like for each line :
      # Name of Customer<SPACE>Folder of log<SPACE>Folder output<SPACE>Host
      Name1;Host Name 2
      # sample (extract of production file, who have 255 lines)
      # all of option in this file apply to all reports ...
      # wA001 c:\WA001\LogIIS\ c:\wA001\stats
      wa001.LeRelaisInternet.com;www1.jeanlouisaubert.com
      # wA002 c:\WA002\LogIIS\ c:\wA002\stats
      Wa002.LeRelaisInternet.com;www.restotel.fr;www.nordpage.fr
      # wA003 c:\WA003\LogIIS\ c:\wA003\stats
      Wa003.LeRelaisInternet.com;www.autobusavapeur.com

      #ServerList c:\jnhdev\webalizer\listeserv.txt

      # If you have dayly rotation on log name, you can change name after
      process a file
      # to have less no productive work day
      # to use this option you need to use "HistoryName" and "Incremental"

      #RenameLog yes
      #NewExtension sav


      # 2 New Options for optimize DNS resolution : is time to live in data
      base cache
      # for good dns resolution (default is 30 days) and for bad
      resolution, like
      # no reverse IP, in this case it's better to store errors in database
      file
      # cause each day bad dns consume a lot of time (default 7 days)

      #TtlDns 30
      #TtlDnsError 7


      # end of JNH .. HAve a nice day !!!

      -------------

      Now calling webalizer from command line, or calling the .bat ends up
      in an error. Logfiles are not found. Instead it searches for a
      another file in c:\wa001\logiis*.log

      What am doing wrong?

      Thank you,

      Eicke
    • eicke@neckar-alb-online.de
      ... will ... and ... and ... and ... be ... (index.html). ... the ... used ... rotate ... its ... in ... this ... where ... with ... on ... given ... name ...
      Message 2 of 3 , Feb 12, 2001
      • 0 Attachment
        --- In webalizer@y..., eicke@n... wrote:
        > Hello,
        >
        > installed webalizer in c:\etc
        >
        > Made a webalizer.bat in c:\etc
        >
        > looks like this:
        >
        > -----------------
        >
        > webalizer -c c:\etc\webalizer.conf -D dns-data.txt
        >
        > -----------------
        >
        > Edited webalizer.conf:
        >
        > here ist is:
        >
        > -----------------
        >
        > #
        > # Sample Webalizer configuration file
        > # Copyright 1997-2000 by Bradford L. Barrett (brad@m...)
        > #
        > # Distributed under the GNU General Public License. See the
        > # files "Copyright" and "COPYING" provided with the webalizer
        > # distribution for additional information.
        > #
        > # This is a sample configuration file for the Webalizer (ver 2.01)
        > # Lines starting with pound signs '#' are comment lines and are
        > # ignored. Blank lines are skipped as well. Other lines are
        > considered
        > # as configuration lines, and have the form "ConfigOption Value"
        > where
        > # ConfigOption is a valid configuration keyword, and Value is the
        > value
        > # to assign that configuration option. Invalid keyword/values are
        > # ignored, with appropriate warnings being displayed. There must be
        > # at least one space or tab between the keyword and its value.
        > #
        > # As of version 0.98, The Webalizer will look for a 'default'
        > configuration
        > # file named "webalizer.conf" in the current directory, and if not
        > found
        > # there, will look for "/etc/webalizer.conf".
        >
        > # LogFile defines the web server log file to use. If not specified
        > # here or on on the command line, input will default to STDIN. If
        > # the log filename ends in '.gz' (ie: a gzip compressed file), it
        will
        > # be decompressed on the fly as it is being read.
        >
        > LogFile D:\home\4saisons\W3SVC3
        >
        > # LogType defines the log type being processed. Normally, the
        > Webalizer
        > # expects a CLF or Combined web server log as input. Using this
        > option,
        > # you can process ftp logs as well (xferlog as produced by wu-ftp
        and
        > # others), or Squid native logs. Values can be 'clf', 'ftp'
        > or 'squid',
        > # with 'clf' the default.
        > # JNH : new value 'iis' for IIS this tag let choice to webalizer to
        > choice
        > # between standard (default in IIS4) log format and W3C (default in
        > IIS5)
        > # webalizer make choice based upon name of Log (std begin with I
        and
        > W3c with E)
        > # you can mix in same folder both type of log, webalizer read all
        and
        > make one
        > # report,
        >
        > LogType iis
        >
        > # OutputDir is where you want to put the output files. This should
        > # should be a full path name, however relative ones might work as
        > well.
        > # If no output directory is specified, the current directory will
        be
        > used.
        >
        > OutputDir D:\home\4saisons\www\webalizer
        >
        > # HistoryName allows you to specify the name of the history file
        > produced
        > # by the Webalizer. The history file keeps the data for up to 12
        > months
        > # worth of logs, used for generating the main HTML page
        (index.html).
        > # The default is a file named "webalizer.hist", stored in the
        > specified
        > # output directory. If you specify just the filename (without a
        > path),
        > # it will be kept in the specified output directory. Otherwise,
        the
        > path
        > # is relative to the output directory, unless absolute (leading /).
        >
        > HistoryName webalizer.hist
        >
        > # Incremental processing allows multiple partial log files to be
        used
        > # instead of one huge one. Useful for large sites that have to
        rotate
        > # their log files more than once a month. The Webalizer will save
        its
        > # internal state before exiting, and restore it the next time run,
        in
        > # order to continue processing where it left off. This mode also
        > causes
        > # The Webalizer to scan for and ignore duplicate records (records
        > already
        > # processed by a previous run). See the README file for additional
        > # information. The value may be 'yes' or 'no', with a default
        > of 'no'.
        > # The file 'webalizer.current' is used to store the current state
        > data,
        > # and is located in the output directory of the program (unless
        > changed
        > # with the IncrementalName option below). Please read at least the
        > section
        > # on Incremental processing in the README file before you enable
        this
        > option.
        >
        > Incremental yes
        >
        > # IncrementalName allows you to specify the filename for saving the
        > # incremental data in. It is similar to the HistoryName option
        where
        > the
        > # name is relative to the specified output directory, unless an
        > absolute
        > # filename is specified. The default is a file
        > named "webalizer.current"
        > # kept in the normal output directory. If you don't
        > specify "Incremental"
        > # as 'yes' then this option has no meaning.
        >
        > IncrementalName webalizer.current
        >
        > # ReportTitle is the text to display as the title. The hostname
        > # (unless blank) is appended to the end of this string (seperated
        with
        > # a space) to generate the final full title string.
        > # Default is (for english) "Usage Statistics for".
        >
        > ReportTitle Statistik von
        >
        > # HostName defines the hostname for the report. This is used in
        > # the title, and is prepended to the URL table items. This allows
        > # clicking on URL's in the report to go to the proper location in
        > # the event you are running the report on a 'virtual' web server,
        > # or for a server different than the one the report resides on.
        > # If not specified here, or on the command line, webalizer will
        > # try to get the hostname via a uname system call. If that fails,
        > # it will default to "localhost".
        >
        > HostName 4saisons.de
        >
        > # HTMLExtension allows you to specify the filename extension to use
        > # for generated HTML pages. Normally, this defaults to "html", but
        > # can be changed for sites who need it (like for PHP embeded pages).
        >
        > #HTMLExtension html
        >
        > # PageType lets you tell the Webalizer what types of URL's you
        > # consider a 'page'. Most people consider html and cgi documents
        > # as pages, while not images and audio files. If no types are
        > # specified, defaults will be used ('htm*', 'cgi' and HTMLExtension
        > # if different for web logs, 'txt' for ftp logs).
        >
        > PageType htm*
        > PageType cgi
        > #PageType phtml
        > #PageType php3
        > #PageType pl
        >
        > # UseHTTPS should be used if the analysis is being run on a
        > # secure server, and links to urls should use 'https://' instead
        > # of the default 'http://'. If you need this, set it to 'yes'.
        > # Default is 'no'. This only changes the behaviour of the 'Top
        > # URL's' table.
        >
        > #UseHTTPS no
        >
        > # DNSCache specifies the DNS cache filename to use for reverse DNS
        > lookups.
        > # This file must be specified if you wish to perform name lookups
        on
        > any IP
        > # addresses found in the log file. If an absolute path is not
        given
        > as
        > # part of the filename (ie: starts with a leading '/'), then the
        name
        > is
        > # relative to the default output directory. See the DNS.README
        file
        > for
        > # additional information.
        >
        > #DNSCache dns_cache.db
        >
        > # DNSChildren allows you to specify how many "children" processes
        are
        > # run to perform DNS lookups to create or update the DNS cache file.
        > # If a number is specified, the DNS cache file will be
        created/updated
        > # each time the Webalizer is run, immediately prior to normal
        > processing,
        > # by running the specified number of "children" processes to perform
        > # DNS lookups. If used, the DNS cache filename MUST be specified as
        > # well. The default value is zero (0), which disables DNS cache
        file
        > # creation/updates at run time. The number of children processes to
        > # run may be anywhere from 1 to 100, however a large number may
        effect
        > # normal system operations. Reasonable values should be between 5
        and
        > # 20. See the DNS.README file for additional information.
        >
        > #DNSChildren 0
        >
        > # HTMLPre defines HTML code to insert at the very beginning of the
        > # file. Default is the DOCTYPE line shown below. Max line length
        > # is 80 characters, so use multiple HTMLPre lines if you need more.
        >
        > #HTMLPre <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0
        > Transitional//EN">
        >
        > # HTMLHead defines HTML code to insert within the <HEAD></HEAD>
        > # block, immediately after the <TITLE> line. Maximum line length
        > # is 80 characters, so use multiple lines if needed.
        >
        > #HTMLHead <META NAME="author" CONTENT="The Webalizer">
        >
        > # HTMLBody defined the HTML code to be inserted, starting with the
        > # <BODY> tag. If not specified, the default is shown below. If
        > # used, you MUST include your own <BODY> tag as the first line.
        > # Maximum line length is 80 char, use multiple lines if needed.
        >
        > #HTMLBody <BODY BGCOLOR="#E8E8E8" TEXT="#000000" LINK="#0000FF"
        > VLINK="#FF0000">
        >
        > # HTMLPost defines the HTML code to insert immediately before the
        > # first <HR> on the document, which is just after the title and
        > # "summary period"-"Generated on:" lines. If anything, this should
        > # be used to clean up in case an image was inserted with HTMLBody.
        > # As with HTMLHead, you can define as many of these as you want and
        > # they will be inserted in the output stream in order of apperance.
        > # Max string size is 80 characters. Use multiple lines if you need
        > to.
        >
        > #HTMLPost <BR CLEAR="all">
        >
        > # HTMLTail defines the HTML code to insert at the bottom of each
        > # HTML document, usually to include a link back to your home
        > # page or insert a small graphic. It is inserted as a table
        > # data element (ie: <TD> your code here </TD>) and is right
        > # alligned with the page. Max string size is 80 characters.
        >
        > #HTMLTail <IMG SRC="msfree.png" ALT="100% Micro$oft free!">
        >
        > # HTMLEnd defines the HTML code to add at the very end of the
        > # generated files. It defaults to what is shown below. If
        > # used, you MUST specify the </BODY> and </HTML> closing tags
        > # as the last lines. Max string length is 80 characters.
        >
        > #HTMLEnd </BODY></HTML>
        >
        > # The Quiet option suppresses output messages... Useful when run
        > # as a cron job to prevent bogus e-mails. Values can be either
        > # "yes" or "no". Default is "no". Note: this does not suppress
        > # warnings and errors (which are printed to stderr).
        >
        > #Quiet no
        >
        > # ReallyQuiet will supress all messages including errors and
        > # warnings. Values can be 'yes' or 'no' with 'no' being the
        > # default. If 'yes' is used here, it cannot be overriden from
        > # the command line, so use with caution. A value of 'no' has
        > # no effect.
        >
        > #ReallyQuiet no
        >
        > # TimeMe allows you to force the display of timing information
        > # at the end of processing. A value of 'yes' will force the
        > # timing information to be displayed. A value of 'no' has no
        > # effect.
        >
        > #TimeMe no
        >
        > # GMTTime allows reports to show GMT (UTC) time instead of local
        > # time. Default is to display the time the report was generated
        > # in the timezone of the local machine, such as EDT or PST. This
        > # keyword allows you to have times displayed in UTC instead. Use
        > # only if you really have a good reason, since it will probably
        > # screw up the reporting periods by however many hours your local
        > # time zone is off of GMT.
        >
        > #GMTTime no
        >
        > # Debug prints additional information for error messages. This
        > # will cause webalizer to dump bad records/fields instead of just
        > # telling you it found a bad one. As usual, the value can be
        > # either "yes" or "no". The default is "no". It shouldn't be
        > # needed unless you start getting a lot of Warning or Error
        > # messages and want to see why. (Note: warning and error messages
        > # are printed to stderr, not stdout like normal messages).
        >
        > #Debug no
        >
        > # FoldSeqErr forces the Webalizer to ignore sequence errors.
        > # This is useful for Netscape and other web servers that cache
        > # the writing of log records and do not guarentee that they
        > # will be in chronological order. The use of the FoldSeqErr
        > # option will cause out of sequence log records to be treated
        > # as if they had the same time stamp as the last valid record.
        > # Default is to ignore out of sequence log records.
        >
        > #FoldSeqErr no
        >
        > # VisitTimeout allows you to set the default timeout for a visit
        > # (sometimes called a 'session'). The default is 30 minutes,
        > # which should be fine for most sites.
        > # Visits are determined by looking at the time of the current
        > # request, and the time of the last request from the site. If
        > # the time difference is greater than the VisitTimeout value, it
        > # is considered a new visit, and visit totals are incremented.
        > # Value is the number of seconds to timeout (default=1800=30min)
        >
        > #VisitTimeout 1800
        >
        > # IgnoreHist shouldn't be used in a config file, but it is here
        > # just because it might be usefull in certain situations. If the
        > # history file is ignored, the main "index.html" file will only
        > # report on the current log files contents. Usefull only when you
        > # want to reproduce the reports from scratch. USE WITH CAUTION!
        > # Valid values are "yes" or "no". Default is "no".
        >
        > #IgnoreHist no
        >
        > # Country Graph allows the usage by country graph to be disabled.
        > # Values can be 'yes' or 'no', default is 'yes'.
        >
        > #CountryGraph yes
        >
        > # DailyGraph and DailyStats allows the daily statistics graph
        > # and statistics table to be disabled (not displayed). Values
        > # may be "yes" or "no". Default is "yes".
        >
        > #DailyGraph yes
        > #DailyStats yes
        >
        > # HourlyGraph and HourlyStats allows the hourly statistics graph
        > # and statistics table to be disabled (not displayed). Values
        > # may be "yes" or "no". Default is "yes".
        >
        > #HourlyGraph yes
        > #HourlyStats yes
        >
        > # GraphLegend allows the color coded legends to be turned on or off
        > # in the graphs. The default is for them to be displayed. This
        only
        > # toggles the color coded legends, the other legends are not
        changed.
        > # If you think they are hideous and ugly, say 'no' here :)
        >
        > #GraphLegend yes
        >
        > # GraphLines allows you to have index lines drawn behind the graphs.
        > # I personally am not crazy about them, but a lot of people
        requested
        > # them and they weren't a big deal to add. The number represents
        the
        > # number of lines you want displayed. Default is 2, you can disable
        > # the lines by using a value of zero ('0'). [max is 20]
        > # Note, due to rounding errors, some values don't work quite right.
        > # The lower the better, with 1,2,3,4,6 and 10 producing nice
        results.
        >
        > #GraphLines 2
        >
        > # The "Top" options below define the number of entries for each
        table.
        > # Defaults are Sites=30, URL's=30, Referrers=30 and Agents=15, and
        > # Countries=30. TopKSites and TopKURLs (by KByte tables) both
        default
        > # to 10, as do the top entry/exit tables (TopEntry/TopExit). The
        top
        > # search strings and usernames default to 20. Tables may be
        disabled
        > # by using zero (0) for the value.
        >
        > #TopSites 30
        > #TopKSites 10
        > #TopURLs 30
        > #TopKURLs 10
        > #TopReferrers 30
        > #TopAgents 15
        > #TopCountries 30
        > #TopEntry 10
        > #TopExit 10
        > #TopSearch 20
        > #TopUsers 20
        >
        > # The All* keywords allow the display of all URL's, Sites, Referrers
        > # User Agents, Search Strings and Usernames. If enabled, a seperate
        > # HTML page will be created, and a link will be added to the bottom
        > # of the appropriate "Top" table. There are a couple of conditions
        > # for this to occur.. First, there must be more items than will fit
        > # in the "Top" table (otherwise it would just be duplicating what is
        > # already displayed). Second, the listing will only show those
        items
        > # that are normally visable, which means it will not show any hidden
        > # items. Grouped entries will be listed first, followed by
        individual
        > # items. The value for these keywords can be either 'yes' or 'no',
        > # with the default being 'no'. Please be aware that these pages can
        > # be quite large in size, particularly the sites page, and seperate
        > # pages are generated for each month, which can consume quite a lot
        > # of disk space depending on the traffic to your site.
        >
        > #AllSites no
        > #AllURLs no
        > #AllReferrers no
        > #AllAgents no
        > #AllSearchStr no
        > #AllUsers no
        >
        > # The Webalizer normally strips the string 'index.' off the end of
        > # URL's in order to consolidate URL totals. For example, the URL
        > # /somedir/index.html is turned into /somedir/ which is really the
        > # same URL. This option allows you to specify additional strings
        > # to treat in the same way. You don't need to specify 'index.' as
        > # it is always scanned for by The Webalizer, this option is just to
        > # specify _additional_ strings if needed. If you don't need any,
        > # don't specify any as each string will be scanned for in EVERY
        > # log record... A bunch f them will degrade performance. Also,
        > # the string is scanned for anywhere in the URL, so a string of
        > # 'home' would turn the URL /somedir/homepages/brad/home.html into
        > # just /somedir/ which is probably not what was intended.
        >
        > #IndexAlias home.htm
        > #IndexAlias homepage.htm
        >
        > # The Hide*, Group* and Ignore* and Include* keywords allow you to
        > # change the way Sites, URL's, Referrers, User Agents and Usernames
        > # are manipulated. The Ignore* keywords will cause The Webalizer to
        > # completely ignore records as if they didn't exist (and thus not
        > # counted in the main site totals). The Hide* keywords will prevent
        > # things from being displayed in the 'Top' tables, but will still be
        > # counted in the main totals. The Group* keywords allow grouping
        > # similar objects as if they were one. Grouped records are
        displayed
        > # in the 'Top' tables and can optionally be displayed in BOLD and/or
        > # shaded. Groups cannot be hidden, and are not counted in the main
        > # totals. The Group* options do not, by default, hide all the items
        > # that it matches. If you want to hide the records that match (so
        > just
        > # the grouping record is displayed), follow with an identical Hide*
        > # keyword with the same value. (see example below) In addition,
        > # Group* keywords may have an optional label which will be displayed
        > # instead of the keywords value. The label should be seperated from
        > # the value by at least one 'white-space' character, such as a space
        > # or tab.
        > #
        > # The value can have either a leading or trailing '*' wildcard
        > # character. If no wildcard is found, a match can occur anywhere
        > # in the string. Given a string "www.yourmama.com", the
        values "your",
        > # "*mama.com" and "www.your*" will all match.
        > # Your own site should be hidden
        >
        > #HideSite *mrunix.net
        > #HideSite localhost
        >
        > # Your own site gives most referrals
        > #HideReferrer mrunix.net/
        >
        > # This one hides non-referrers ("-" Direct requests)
        > #HideReferrer Direct Request
        >
        > # Usually you want to hide these
        > HideURL *.gif
        > HideURL *.GIF
        > HideURL *.jpg
        > HideURL *.JPG
        > HideURL *.png
        > HideURL *.PNG
        > HideURL *.ra
        >
        > # Hiding agents is kind of futile
        > #HideAgent RealPlayer
        >
        > # You can also hide based on authenticated username
        > #HideUser root
        > #HideUser admin
        >
        > # Grouping options
        > #GroupURL /cgi-bin/* CGI Scripts
        > #GroupURL /images/* Images
        > #GroupSite *.aol.com
        > #GroupSite *.compuserve.com
        > #GroupReferrer yahoo.com/ Yahoo!
        > #GroupReferrer excite.com/ Excite
        > #GroupReferrer infoseek.com/ InfoSeek
        > #GroupReferrer webcrawler.com/ WebCrawler
        >
        > #GroupUser root Admin users
        > #GroupUser admin Admin users
        > #GroupUser wheel Admin users
        >
        > # The following is a great way to get an overall total
        > # for browsers, and not display all the detail records.
        > # (You should use MangleAgent to refine further...)
        >
        > #GroupAgent MSIE Micro$oft Internet Exploder
        > #HideAgent MSIE
        > #GroupAgent Mozilla Netscape
        > #HideAgent Mozilla
        > #GroupAgent Lynx* Lynx
        > #HideAgent Lynx*
        >
        > # HideAllSites allows forcing individual sites to be hidden in the
        > # report. This is particularly useful when used in conjunction
        > # with the "GroupDomain" feature, but could be useful in other
        > # situations as well, such as when you only want to display grouped
        > # sites (with the GroupSite keywords...). The value for this
        > # keyword can be either 'yes' or 'no', with 'no' the default,
        > # allowing individual sites to be displayed.
        >
        > #HideAllSites no
        >
        > # The GroupDomains keyword allows you to group individual hostnames
        > # into their respective domains. The value specifies the level of
        > # grouping to perform, and can be thought of as 'the number of dots'
        > # that will be displayed. For example, if a visiting host is named
        > # cust1.tnt.mia.uu.net, a domain grouping of 1 will result in just
        > # "uu.net" being displayed, while a 2 will result in "mia.uu.net".
        > # The default value of zero disable this feature. Domains will only
        > # be grouped if they do not match any existing "GroupSite" records,
        > # which allows overriding this feature with your own if desired.
        >
        > #GroupDomains 0
        >
        > # The GroupShading allows grouped rows to be shaded in the report.
        > # Useful if you have lots of groups and individual records that
        > # intermingle in the report, and you want to diferentiate the group
        > # records a little more. Value can be 'yes' or 'no', with 'yes'
        > # being the default.
        >
        > #GroupShading yes
        >
        > # GroupHighlight allows the group record to be displayed in BOLD.
        > # Can be either 'yes' or 'no' with the default 'yes'.
        >
        > #GroupHighlight yes
        >
        > # The Ignore* keywords allow you to completely ignore log records
        > based
        > # on hostname, URL, user agent, referrer or username. I hessitated
        in
        > # adding these, since the Webalizer was designed to generate
        > _accurate_
        > # statistics about a web servers performance. By choosing to ignore
        > # records, the accuracy of reports become skewed, negating why I
        wrote
        > # this program in the first place. However, due to popular demand,
        > here
        > # they are. Use the same as the Hide* keywords, where the value
        can
        > have
        > # a leading or trailing wildcard '*'. Use at your own risk ;)
        >
        > #IgnoreSite bad.site.net
        > #IgnoreURL /test*
        > #IgnoreReferrer file:/*
        > #IgnoreAgent RealPlayer
        > #IgnoreUser root
        >
        > # The Include* keywords allow you to force the inclusion of log
        > records
        > # based on hostname, URL, user agent, referrer or username. They
        take
        > # precidence over the Ignore* keywords. Note: Using Ignore/Include
        > # combinations to selectivly process parts of a web site is
        _extremely
        > # inefficent_!!! Avoid doing so if possible (ie: grep the records
        to a
        > # seperate file if you really want that kind of report).
        >
        > # Example: Only show stats on Joe User's pages...
        > #IgnoreURL *
        > #IncludeURL ~joeuser*
        >
        > # Or based on an authenticated username
        > #IgnoreUser *
        > #IncludeUser someuser
        >
        > # The MangleAgents allows you to specify how much, if any, The
        > Webalizer
        > # should mangle user agent names. This allows several levels of
        > detail
        > # to be produced when reporting user agent statistics. There are
        six
        > # levels that can be specified, which define different levels of
        > detail
        > # supression. Level 5 shows only the browser name (MSIE or Mozilla)
        > # and the major version number. Level 4 adds the minor version
        number
        > # (single decimal place). Level 3 displays the minor version to two
        > # decimal places. Level 2 will add any sub-level designation (such
        > # as Mozilla/3.01Gold or MSIE 3.0b). Level 1 will attempt to also
        add
        > # the system type if it is specified. The default Level 0 displays
        > the
        > # full user agent field without modification and produces the
        greatest
        > # amount of detail. User agent names that can't be mangled will be
        > # left unmodified.
        >
        > #MangleAgents 0
        >
        > # The SearchEngine keywords allow specification of search engines
        and
        > # their query strings on the URL. These are used to locate and
        report
        > # what search strings are used to find your site. The first word is
        > # a substring to match in the referrer field that identifies the
        > search
        > # engine, and the second is the URL variable used by that search
        > engine
        > # to define it's search terms.
        >
        > SearchEngine yahoo.com p=
        > SearchEngine altavista.com q=
        > SearchEngine google.com q=
        > SearchEngine eureka.com q=
        > SearchEngine lycos.com query=
        > SearchEngine hotbot.com MT=
        > SearchEngine msn.com MT=
        > SearchEngine infoseek.com qt=
        > SearchEngine webcrawler searchText=
        > SearchEngine excite search=
        > SearchEngine netscape.com search=
        > SearchEngine mamma.com query=
        > SearchEngine alltheweb.com query=
        > SearchEngine northernlight.com qr=
        >
        > # The Dump* keywords allow the dumping of Sites, URL's, Referrers
        > # User Agents, Usernames and Search strings to seperate tab
        delimited
        > # text files, suitable for import into most database or spreadsheet
        > # programs.
        >
        > # DumpPath specifies the path to dump the files. If not specified,
        > # it will default to the current output directory. Do not use a
        > # trailing slash ('/').
        >
        > #DumpPath /var/lib/httpd/logs
        >
        > # The DumpHeader keyword specifies if a header record should be
        > # written to the file. A header record is the first record of the
        > # file, and contains the labels for each field written. Normally,
        > # files that are intended to be imported into a database system
        > # will not need a header record, while spreadsheets usually do.
        > # Value can be either 'yes' or 'no', with 'no' being the default.
        >
        > #DumpHeader no
        >
        > # DumpExtension allow you to specify the dump filename extension
        > # to use. The default is "tab", but some programs are pickey about
        > # the filenames they use, so you may change it here (for example,
        > # some people may prefer to use "csv").
        >
        > #DumpExtension tab
        >
        > # These control the dumping of each individual table. The value
        > # can be either 'yes' or 'no'.. the default is 'no'.
        >
        > #DumpSites no
        > #DumpURLs no
        > #DumpReferrers no
        > #DumpAgents no
        > #DumpUsers no
        > #DumpSearchStr no
        >
        > # End of configuration file... Have a nice day!
        >
        > # begin of JNH mofications
        > # new entry for Win32 release
        >
        > # NOUVELLE ENTREE pour les serveurs NT
        >
        > # nom de la page par defaut sur le serveur
        > # replace file "Index" for unix systems by other name
        >
        > IndexPage default
        >
        > # name of folder to read all file inside ...
        >
        > # FolderLog C:\JnhDev\WebAlizer32\Exemple de Logs\IIS4.0\Log
        > Standard\
        > FolderLog c:\wa001\logiis\
        > ExtentionLog log
        >
        > # when you use mix type of log in same folder, webalizer sort file
        > for order by
        > # name, but if begin of file file is mix sort didn't make work,
        then
        > you can disable it
        > # default is no
        >
        > # DisableSort yes
        >
        >
        > # Name of file contain list of server to process like for each
        line :
        > # Name of Customer<SPACE>Folder of log<SPACE>Folder
        output<SPACE>Host
        > Name1;Host Name 2
        > # sample (extract of production file, who have 255 lines)
        > # all of option in this file apply to all reports ...
        > # wA001 c:\WA001\LogIIS\ c:\wA001\stats
        > wa001.LeRelaisInternet.com;www1.jeanlouisaubert.com
        > # wA002 c:\WA002\LogIIS\ c:\wA002\stats
        > Wa002.LeRelaisInternet.com;www.restotel.fr;www.nordpage.fr
        > # wA003 c:\WA003\LogIIS\ c:\wA003\stats
        > Wa003.LeRelaisInternet.com;www.autobusavapeur.com
        >
        > #ServerList c:\jnhdev\webalizer\listeserv.txt
        >
        > # If you have dayly rotation on log name, you can change name after
        > process a file
        > # to have less no productive work day
        > # to use this option you need to use "HistoryName" and "Incremental"
        >
        > #RenameLog yes
        > #NewExtension sav
        >
        >
        > # 2 New Options for optimize DNS resolution : is time to live in
        data
        > base cache
        > # for good dns resolution (default is 30 days) and for bad
        > resolution, like
        > # no reverse IP, in this case it's better to store errors in
        database
        > file
        > # cause each day bad dns consume a lot of time (default 7 days)
        >
        > #TtlDns 30
        > #TtlDnsError 7
        >
        >
        > # end of JNH .. HAve a nice day !!!
        >
        > -------------
        >
        > Now calling webalizer from command line, or calling the .bat ends
        up
        > in an error. Logfiles are not found. Instead it searches for a
        > another file in c:\wa001\logiis*.log
        >
        > What am doing wrong?
        >
        > Thank you,
        >
        > Eicke

        Did not read to the End, ...

        Now everything works fine!
      • eicke@neckar-alb-online.de
        I did not read to the End of the conf. Now everything works well. Bye
        Message 3 of 3 , Feb 12, 2001
        • 0 Attachment
          I did not read to the End of the conf.

          Now everything works well.

          Bye
        Your message has been successfully submitted and would be delivered to recipients shortly.