Loading ...
Sorry, an error occurred while loading the content.

Messages List


Flame-eater with glass cylinder

Hello all interested, Almost all flame-eaters suffer from internal corrosion caused by the hot and humid flame gases which are sucked into the cylinder. As a
Feb 24

Re-design "Wiggers" Stirling

Hi all interested, Already in 2003 I made a vertical Stirling based on the design from the firm Wiggers in Germany. I implimented several changes to let it run
May 30, 2016

Stirling engine question

First I have to start with I know very little about engines or motors. I have an idea that I want to market using a small heat generated motor. After doing
Apr 14, 2015

Re: PutPut Fountain with Rainbow Led

Hello Malcolm, I think you are right; next time, I promise. Jan Verzonden van Yahoo
Jan Ridders
Oct 12, 2014

Re: PutPut Fountain with Rainbow Led

Please Jan, it's time to change the music and find another tune ! Malcolm I don't suffer from insanity I enjoy it! Mene, mene, tekel, upharsin The writing is
Malcolm Parker-Lisberg
Oct 12, 2014

PutPut Fountain with Rainbow Led

Hi All, I made a second version of my "PutPut Fountain" in what I implemented a "Rainbow" Led lamp. This Led changes its color every 4 seconds from red, bleu,
Oct 12, 2014

PutPut Fountain

Hi all, I designed and made a little device with a small touch of steam technology as a gift for one of my grandchildren. It is based on the so called
Sep 16, 2014

2-cylinder Flame-Eater version MK2

Hi all interested, Already in 2004 I made a 2-cylinder flame-eater with extenal valves and overhead rockers. This engine can run well but only if the drive
Feb 2, 2014

Improved "MK2 Miniature Flame-Eater"

Hi all, Already in 2004 I designed a miniature flame-eater. But I was never satisfied wit it because the construction was rather complex causing difficult
Dec 26, 2013

Update "Magnet Stirling"

Hi all interested, I improved the design for the "Magnet Stirling" again and made a new video also with trouble-shoot demos at the end of it in case of
Dec 13, 2013

"Experiences & Tips" Stirling and Flame-Eater models

Hi all interested, During the last 12 years I have designed and made several Stirling and Flame-Eater models. I have actualalized the the page "Experiences
Dec 13, 2013

Improved MK2 version of the "Magnet Stirling"

Hi all, I have made an improved MK2 version of my "Magnet Stirling: 3x faster and thermal isolation for the Neodymium magnet in the displacer. See the video:
Nov 26, 2013

Re: Magnet Stirling

Hello Malcolm,   When the angle between the crank pins on the gears is exactly 90 degrees there is some (dynamic) lag between the displacer and the drive
Jan Ridders
Sep 13, 2013

Re: Magnet Stirling

Jan Did you have to alter the timing as, looking at the photos, the angle between the displacer magnet drive and the power piston is not 90 degrees. On the
Malcolm Parker-Lisberg
Sep 13, 2013

Magnet Stirling

Hi all, I designed and made a (cute) little Stirling model with free running graphite displacer driven by a simple magnet system; see video:
Sep 13, 2013
View First Topic Go to View Last Topic