Loading ...
Sorry, an error occurred while loading the content.

Topics List

[BUG] HomeVision variables restricted to 128

(2)
I would like to say a huge ‘thanks’ to Kevin for his perseverance in working on this. He’s spent hours figuring it out and I didn’t make it easy for
Kevin Hawkins
2
posts
Mar 23

Gateway failure?

(6)
Before we do that let me send you a new board and check it works, then we'll sort out what to do re. any costs. You wouldn't actually end up with two
Ben Wilkinson
6
posts
Mar 17

Cbus 5753 PEIRL Sensor

(2)
Sorry Ben - just saw this and your later message somewhat negates the question... :-( The gateway only supports the lighting application on application 56
Ben Wilkinson
2
posts
Mar 16

DLT and Saturn Scenes in the Gateway

(21)
Success!!! The JP23 was between pins 2 and 3. I've changed it to 1 and 2,. First time around it didn't make any difference, but I took cbus power off the
bensbarn2001
21
posts
Dec 2, 2012

Fwd: Fw: [ukusa_gateway] Taken a few steps backwards!

(5)
The gateway isn't able to see the C-Bus PCI interface (the data that it returns) but it is able to send data to it. I have guests here at the moment but
Ben Wilkinson
5
posts
Dec 1, 2012

DLT re-labelling

(1)
Following on from Paul's comment about using one DLT button to toggle through multiple scenes, I've gone through old messages about DLT labelling and at most,
bensbarn2001
1
post
Nov 29, 2012

Additional CBus network

(7)
Hi Kevin, The temp sensors are 5031TS. They do seem to allow me to change the application number to lighting, but apart from that, I can't see a way to
bensbarn2001
7
posts
Sep 18, 2011

A gateway PCB picture... SIM installation

(1)
Here's a picture of the gateway PCB with the C-Bus SIM installed and the jumpers changed. This gateway is not using the HomeVision serial option so jumpers
ukusaconsulting
1
post
Sep 6, 2011

C-Bus SIM modules available soon.

(9)
C-Bus SIM's will be £75.00 including a C-Bus splitter cable so you can daisy chain your C-Bus cable. They're available now. UK shipping is £5.50 by Special
ukusaconsulting
9
posts
Aug 31, 2011

Power supply is for powering the gateway only !

(5)
I am not currently working on the v2 beta (for the reasons outlined below) but I shall return to it once I've ascertained the v3 Softools viability. Anyone
ukusaconsulting
5
posts
Jan 15, 2010

Actions for Custom Lighting

(16)
Hi Kevin,   Thanks alot for all the suggestions. I will check them out. Basically, I would like all the home automation to run on the HV Pro and I need a
yuenchoong liew
16
posts
Dec 6, 2009

What is the easiest way to find the mac code for the gateway's ether

(3)
An even quicker method - run the firmware updater and it will list the MAC and IP address of your gateway UKUSA Gateway beta 2 a14 IP=192.168.1.100
Gary Tall
3
posts
Dec 3, 2009

My Gateway won't connect to HV. (repost from email)

(2)
yuengchoong liew wrote: Hello Kevin, Success at last. Serial port 3 was jumpered to RS485 mode!!!!! thanks, liew
Kevin Hawkins
2
posts
Dec 2, 2009

Gateway and C-Bus input units (repost from email)

(4)
Hi liew C-Bus switches are 'input' units on C-Bus in so much as they are used to physically input changes onto C-Bus - however the messages they send are
Kevin Hawkins
4
posts
Dec 2, 2009

Beta 2 ...

(4)
Hi Ben, Unfortunately not, but I will keep that on the feature request list.. cheers Kevin
Kevin Hawkins
4
posts
Nov 25, 2009
View First Topic Go to View Last Topic
Loading 1 - 15 of total 111 topics