Loading ...
Sorry, an error occurred while loading the content.

Re: [tracker2] Wall Mount Temperature Sensor on a T2-135

Expand Messages
  • wyoming_semi_driver@hotmail.com
    thanks Ron ... From: Scott Miller Sent: Tuesday, February 02, 2010 10:06 AM To: Subject: Re: [tracker2] Wall
    Message 1 of 3 , Feb 2, 2010
    • 0 Attachment
      thanks
      Ron

      --------------------------------------------------
      From: "Scott Miller" <scott@...>
      Sent: Tuesday, February 02, 2010 10:06 AM
      To: <tracker2@yahoogroups.com>
      Subject: Re: [tracker2] Wall Mount Temperature Sensor on a T2-135

      > The T2 is tested with the DS18S20. I think the DS18B20 has a slightly
      > different interface, can't remember if I ever added that. It'll connect
      > to the 1WIRE pin on the rear connector for the 135.
      >
      > Scott
      >
      > Ron K7CDL wrote:
      >>
      >>
      >> i plan on using one of these
      >> http://www.embeddeddatasystems.com/OW-TEMP-xW-12x--Wall-Mount-Temperature-Sensor_p_96.html
      >> <http://www.embeddeddatasystems.com/OW-TEMP-xW-12x--Wall-Mount-Temperature-Sensor_p_96.html>
      >> on the T2-135
      >>
      >> my question is what port do i need to why it for on the alinco, the back
      >> port of frount port? also what senor should i order,the DS18B20 or the
      >> DS18S20, the DS18B20 needs power but the DS18S20 doesnt need power?
      >> thanks for any help.
      >>
      >> K7CDL
      >> Ron
      >>
      >>
      >
      >
      >
      > ------------------------------------
      >
      > Yahoo! Groups Links
      >
      >
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.