Loading ...
Sorry, an error occurred while loading the content.

Re: [tracker2] Re: what am i doing wroung on setting up?

Expand Messages
  • Rudy Benner
    I have had loose screws for years... ... From: wyoming_semi_driver@hotmail.com To: tracker2@yahoogroups.com Sent: Wednesday, December 30, 2009 7:19 PM Subject:
    Message 1 of 15 , Dec 30, 2009
    • 0 Attachment
      I have had loose screws for years...
       
       
      ----- Original Message -----
      Sent: Wednesday, December 30, 2009 7:19 PM
      Subject: Re: [tracker2] Re: what am i doing wroung on setting up?

       

      got it working, for some reason it started working on its own. I must have had a few screws missing hahaha
      K7CDL
      Ron

      From: Patrick
      Sent: Wednesday, December 30, 2009 4:34 PM
      Subject: Re: [tracker2] Re: what am i doing wroung on setting up?

       

      Also ps the HI and HT jumpers have nothing to do with other. HT enables
      and disables a part of the circuit to the ptt to allow (some) handhelds
      to transmit without needing to have them in the cable (as you appear to
      have).. the HI jumper adjusts the volume of the transmit audio to a
      high or low setting, which is then further tweaked in the config program

      p..

      wyoming_semi_ driver@hotmail. com wrote:
      >
      >
      > something is very funny. I was able to get the HT to work without the
      > HT jumper in place and with the HI jumper in place. as soon as I take
      > the HI jumper out and put the HT jumper in it stops working. still not
      > able to get mobile to work at all.
      >
      > *From:* wyoming_semi_ driver@hotmail. com
      > <mailto:wyoming_semi_ driver@hotmail. com>
      > *Sent:* Wednesday, December 30, 2009 3:20 PM
      > *To:* tracker2@yahoogroup s.com <mailto:tracker2@yahoogroup s.com>
      > *Subject:* Re: [tracker2] Re: what am i doing wroung on setting up?
      >
      >
      >
      > PTT stays on constantly when the HT is set with my mobile (I know this
      > is normal) this tells me it can PTT the rig. if I hook up the HT
      > nothing happens at all. the only time I can get any PTT is when HT
      > jumper is set on mobile
      >
      > *From:* Scott Miller <mailto:scott@opentrac. org>
      > *Sent:* Wednesday, December 30, 2009 2:23 PM
      > *To:* tracker2@yahoogroup s.com <mailto:tracker2@yahoogroup s.com>
      > *Subject:* Re: [tracker2] Re: what am i doing wroung on setting up?
      >
      >
      >
      > > only time I can get the tracker2 to PTT on my mobile is if I turn on
      > the
      > > HT jumper when hooked up to my mobile but then if I go under the config
      >
      > Are you saying the PTT works properly when the HT jumper is set, or does
      > PTT stay on constantly when you set the jumper?
      >
      > Scott
      >
      >
      >
      >



      No virus found in this incoming message.
      Checked by AVG - www.avg.com
      Version: 8.5.431 / Virus Database: 270.14.123/2594 - Release Date: 12/30/09 07:27:00
    Your message has been successfully submitted and would be delivered to recipients shortly.