Re: Tracker2 and Nuvi 350 - not accepting commands?
- I think I have a 9 volt adapter. so I am all set.
Found the problem
1) I was sending "-- int 120"
2) The correct message is "--int 120"
put an extra space in there and cause problems with commands.
--- In firstname.lastname@example.org, Scott Miller <scott@...> wrote:
> Hi Kevin,
> Those commands should work. I'd start by clearing out the outbox on the
> nuvi to make sure the T2 isn't getting confused by old messages stuck in
> the queue.
> I just came across your cable return - it wound up in the wrong place.
> Did you ever get the 9-volt adapter, or do you still need one?
> Kevin Jensen wrote:
> > My tracker2 will accept commands. It accepts the "--smart on" command
> > to activate the snartbeaconing. I can also get the tracker2 status,
> > by sending that message.
> > When I use my Nuvi 350 to send the command
> > "--interval 120"
> > The Tracker2 responds with an "invalid command" message
> > Also when I send the command
> > "--digi on"
> > To turn the digipeater system on, I get the same response of "invalid
> > command".
> > So what am I doing wrong? These are printed commands, on the Tracker
> > 2 - Nuvi 350 cheat sheet stored here in the data files section. Is
> > the chj=eat sheet hopelessly out of date? Does someone have the
> > current command set?