Loading ...
Sorry, an error occurred while loading the content.

Re: [tracker2] T2-301

Expand Messages
  • Scott Miller
    No, there s no software calibration right now. It s based on the 5v regulator output. If you re interested in tracking down the cause of the error, I d start
    Message 1 of 7 , Sep 12, 2009
    • 0 Attachment
      No, there's no software calibration right now. It's based on the 5v
      regulator output. If you're interested in tracking down the cause of
      the error, I'd start there. Chances are the regulator in the 301 is
      running a bit high. I think they're spec'd to +/- 250 mV.

      Scott

      Erich J. Ritzmann wrote:
      >
      >
      > I have a T2m connected to an FT100D. And, the T2-301 with Nuvi 350.
      > Both systems working off the same APO power line.
      >
      > The T2m reports 13.9, while the T2-301 reports 13.4vdc. My judicious
      > Fluke 87 multimeter agrees with the T2m.
      >
      > Is there a way to calibrate the T2-301?
      >
      > --
      > Erich J. Ritzmann//VA3XTO
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.