Loading ...
Sorry, an error occurred while loading the content.

Re: [tracker2] T2-135 rev 1.2 schematic available?

Expand Messages
  • Scott Miller
    I just posted the schematic here: http://wiki.argentdata.com/index.php?title=T2-135 The .1 pads are listed individually in various places around the
    Message 1 of 2 , May 20, 2009
    • 0 Attachment
      I just posted the schematic here:

      http://wiki.argentdata.com/index.php?title=T2-135

      The .1" pads are listed individually in various places around the
      schematic. They're only used for programming. The 8-pin chip on the
      schematic (prior to 1.2) was a serial FRAM which was never actually used.

      Scott

      djrobertson_99 wrote:
      >
      >
      >
      > I am attempting to use a t2-135 board I purchased at Dayton for
      > integration into the battery case of an Icom commercial HT (not enough
      > space for the ot2m) the schematics posted don't seem to agree with the
      > "observed reality" of the board. For one there is a row of .1" pads that
      > are not noted on the schematic at all. there is also an 8 pin chip on
      > the schematic that doesn't seem to exist on the board.
      > Can I get a schematic for the rev 1.2 board?
      > Dale NV8U
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.