Loading ...
Sorry, an error occurred while loading the content.

Re: [tracker2] Re: Receive levels - Diagnostic

Expand Messages
  • Scott Miller
    Can t do any level monitoring on the T2 because it doesn t have access to the raw audio. The OT1+ does and I could show the raw audio level. For showing the
    Message 1 of 4 , May 5, 2009
    • 0 Attachment
      Can't do any level monitoring on the T2 because it doesn't have access
      to the raw audio. The OT1+ does and I could show the raw audio level.
      For showing the twist, it'd be easier just to grab a bunch of samples
      and plot them on the screen as an oscilloscope trace.

      Scott

      zl1vfo wrote:
      >
      >
      >
      > --- In tracker2@yahoogroups.com <mailto:tracker2%40yahoogroups.com>,
      > Patrick <winston@...> wrote:
      > >
      > > Scott,
      > >
      > > Is there any way of doing a receive level display in the diagnostic part
      > > of the config program? when trying to tune up radios and trackers its
      > > hard to judge if you're having receive level issues when you're dealing
      > > with radios with which you're getting discriminator audio rather then
      > > audio from the speaker..
      > >
      > > p
      > >
      >
      > On a related note, it would also be nice to have it show the individual
      > levels of the 1200 and 2200Hz tones - to get an idea of the amount of
      > twist in the audio. Side by side bargraphs would be ideal, but raw
      > numbers could work too...
      >
      > -Ian ZL1VFO
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.