Loading ...
Sorry, an error occurred while loading the content.
 

Re: [tracker2] Re: OT2/Nuvi profile change on speed?

Expand Messages
  • Scott Miller
    I know that in Garmin binary mode it s not, because the T2 calculates course/speed from X/Y velocity itself. Scott
    Message 1 of 17 , Apr 21 7:55 PM
      I know that in Garmin binary mode it's not, because the T2 calculates
      course/speed from X/Y velocity itself.

      Scott

      Fred Hillhouse wrote:
      >
      >
      > Is vertical movement included in the speed calculations? I am thinking
      > that a vertical change counts towards speed in the GPS too.
      >
      > Best regards,
      > Fred
      >
      >
      > ------------------------------------------------------------------------
      > *From:* tracker2@yahoogroups.com [mailto:tracker2@yahoogroups.com]
      > *On Behalf Of *ki6tsf
      > *Sent:* Sunday, April 05, 2009 16:16
      > *To:* tracker2@yahoogroups.com
      > *Subject:* [tracker2] Re: OT2/Nuvi profile change on speed?
      >
      >
      > Any official answer on this?
      >
      > My OT2 is going to profile2 again (speed > 5) altough
      > the vehicle is stopped and the position reported is not
      > moving at all:
      >
      > 2009-04-05 19:12:46 UTC:
      > KI6TSF-9>APOT2A,WIDE1-1,WIDE2-1,qAR,W6YX-5:!3723.80N/12205.96W>/A=000088
      > 12.7V 26C Batmobile...
      > 2009-04-05 19:14:48 UTC:
      > KI6TSF-9>APOT2A,WIDE1-1,WIDE2-1,qAR,W6YX-5:!3723.80N/12205.96W>/A=000088
      > 12.7V 26C Batmobile...
      > 2009-04-05 19:16:49 UTC:
      > KI6TSF-9>APOT2A,WIDE1-1,WIDE2-1,qAR,W6YX-5:!3723.80N/12205.96W>/A=000088
      > 12.7V 26C Batmobile...
      > 2009-04-05 19:22:52 UTC:
      > KI6TSF-9>APOT2A,WIDE1-1,WIDE2-1,qAR,W6YX-5:!3723.80N/12205.96W>/A=000088
      > 12.7V 26C Batmobile...
      >
      > How can I fix that? Does anybody have the same problem, or
      > is my OT2 faulty?
      >
      > Thanks,
      >
      > Bernard
      >
      > --- In tracker2@yahoogroups.com <mailto:tracker2%40yahoogroups.com>,
      > James Ewen <ve6srv@...> wrote:
      > >
      > > On Tue, Mar 31, 2009 at 10:09 PM, k7ybz <k7ybz@...> wrote:
      > >
      > > > I know what hysteresis is. The "concept" is appropriate for
      > > > smartbeacon and profile switching. You don't want both ends
      > > > too close to each other as you 'may' get unpridictable results. I
      > >
      > > There's NO hysteresis in SmartBeaconing. Hysteresis again has an
      > > overlap area where you can be in either state when between the two
      > > limits depending upon from beyond which value you approach.
      > There's no
      > > possibility of that in SmartBeaconing.
      > >
      > > You will get totally predictable results if you set your low speed to
      > > 5 and high speed to 6 with SmartBeaconing.
      > >
      > > James
      > > VE6SRV
      > >
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.