Re: Ok got the 350 connected to the OT2m
- Thank you, I sent the message from the Nuvi and it seems to have fixed it, that is great.
I went back into otconfig and I had the k / in the wrong boxes.
--- In firstname.lastname@example.org, "Keith VE7GDH" <ve7gdh@...> wrote:
> Brian KD0FBK wrote...
> > I show up just fine here www.openaprs.net/ zip code 66071 or KD0FBK-1
> > I have noticed that on the other link several stations around this are
> > don't show up
> 2009-04-01 23:19:39 UTC:
> :!3855.26Nk09445.78W/214/064/A=001074 14.0V 29C
> [Invalid uncompressed location]
> You're getting closer, but it looks like you have the table and symbol
> character backwards - hi! To fix it, do one of the following. Either...
> 1) send a message from the Nuvi to fix it...
> --SYM /k
> 2) or you can fix it in otwincfg.exe
> symbol table /
> symbol code k
> 3) or run otwincfg.exe to put it into AMODE AUTO so you can open up a
> terminal program and then in the terminal program, enter...
> SYM /k (or SYMBOL /k)
> Of course, if you have to run otwincfg.exe before you can gain access
> from a terminal program, you might as well just fix it in otwincfg.exe!
> 4) or by sending an APRS message to it from elsewhere (if you have your
> callsign in the AUTHLIST) to it. The message would go to KD0FBK-1 and
> the content of the message would be "cmd SYM /k" without the quotes...
> assuming you aren't using password access control.
> If you were trying to enter the SUV instead of truck symbol, you
> wouldn't be able to fix it from the Nuvi as you can't enter a backslash.
> 73 es cul - Keith VE7GDH
> "I may be lost, but I know exactly where I am!"