Loading ...
Sorry, an error occurred while loading the content.

RE: [tracker2] Re: Calibrate - QT2m Proto B

Expand Messages
  • scott@opentrac.org
    Calibrate s broken, at least for the moment. Try setting the TUNE pot all the way to the right. Use the STAT command to see if it s getting FCS errors. Scott
    Message 1 of 4 , Jul 17 11:02 AM
    • 0 Attachment
      Calibrate's broken, at least for the moment. Try setting the TUNE pot all
      the way to the right. Use the STAT command to see if it's getting FCS
      errors.

      Scott

      > -----Original Message-----
      > From: tracker2@yahoogroups.com
      > [mailto:tracker2@yahoogroups.com] On Behalf Of rsp92028
      > Sent: Sunday, July 16, 2006 10:48 PM
      > To: tracker2@yahoogroups.com
      > Subject: [tracker2] Re: Calibrate - QT2m Proto B
      >
      > I can't get calibrate to work also, and no loop back. Decoding only a
      > few packets. With SWDCD on get a indication of carrier, so decoder is
      > getting audio. Like you can't find a assembly error.
      >
      > Ron
    Your message has been successfully submitted and would be delivered to recipients shortly.