Re: Stupid question?
Thanks a lot to all who answered!
Now I can connect with a bit more confidence ;-)
--- In firstname.lastname@example.org, mark.rice@... wrote:
> Hi Bjornung,
> No, it's not really a stupid question at all.
> Yes, either one can power the OT2m. I've used the rear DC
> mostly, but for other implementations, I've used the "data" cable
> The OT2m schematic (in the lower left corner) shows the two
> connector-power arrangement. The X5 is the rear DC power
> The X2 is the DB9 "data" cable connector (indicating that the +
> comes in on pin 7 of the X2 connector and grounded on pin 6 of the
> Hope that helps.
> - Mark Rice
> -----Original Message-----
> From: email@example.com [mailto:firstname.lastname@example.org] On
> Behalf Of Bjornung
> Sent: Wednesday, October 08, 2008 3:22 AM
> To: email@example.com
> Subject: [tracker2] Stupid question?
> Hi all
> I have had my OT2 for a couple of months now and finally seems to
> time to play with it. I plan to use the cables I used on my TT3
> bought from Byonics) because I understand they are compatible with
> Now - the cable to be used from the OT2 to the radio also has a
> cable which I used to power the TT3 with. On the OT2 there is also
> separate power-inn connection at the rear.
> I tried to read the manual and get the impression that it does not
> matter which one of these I use to power the OT2?
> Is this correct?
> Best regards
> Bjornung Jensen
> Yahoo! Groups Links