Re: [tracker2] Re: Recieving APRS data on Garmin GPSMap60CSX
- It's the interface mode that matters - should have options for NMEA
IN/OUT and GARMIN.
Yes, you can just connect to the T2 using a comm program. Make sure
port A is in AUTO mode and not GARMIN to get a command prompt.
> The Garmin unit is set to UTM with WGS84. I assume since it is
> providing the data to the tracker, that it should also be recieving.
> Can I exclude the Garmin from testing the RX piece of the tracker?
> What about testing the output (RX) via UI-View.
> I assume all I need to do is set the com-port?
> To answer some of the previous questions
> On the GPSMap60csx
> was running 3.30
> now running 3.70
> firmware Build for Tracker
> Was 54100
> Now 54680
> Quick note about the tracker fireware upgrade, I did tell it to use
> my existing settings, it still defaulted the value of the port A type
> to Auto.
> Here is the revision history for the Garmin