Loading ...
Sorry, an error occurred while loading the content.
 

Re: [tracker2] Tracker2 Problems

Expand Messages
  • Scott Miller
    Is this a T2-135? If so, it s probably using the jumper option for profile switching, which happens to be connected to a handshaking line. Just disable
    Message 1 of 3 , Jul 4, 2008
      Is this a T2-135? If so, it's probably using the 'jumper' option for
      profile switching, which happens to be connected to a handshaking line.
      Just disable profile switching from otwincfg.

      Scott

      Dennis Rogers wrote:
      >
      >
      > I use my Tracker 2 as a RF/Igate/Digipeater using UI-View32.
      >
      > Problem: If I reboot the computer or disconnect the RS-232 line the
      > Tracker2 goes back to "AMODE" as default.
      > This causes UI-View32 to loose communications as it is looking for KISS
      > mode transmissions. I have to literally
      > use a terminal program and enter the CMD mode of the Tracker2 and change
      > the AMODE to KISS mode and all
      > is well.
      >
      > Question: Is the Tracker2 using flash memory or some battery backed ram
      > for the settings? This would be bad
      > if used as a remote digipeater or Igate. Is there a firmware update for
      > this fix?
      >
      > Please advise.
      >
      > Dennis
      > --
      > Regards,
      >
      > Dennis, N5VRP
      > n5vrp.satx@... <mailto:n5vrp.satx@...>
      > or n5vrp@... <mailto:n5vrp@...>
      >
      > I-Square Reflector
      > Dstar User / D-Gate Provider
      > ARRL Member
      > Cactus-Intertie Member
      > AMSAT Member, President's Club
      > 73's from SATX
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.