Re: OT2m not functioning as digi
- For what it's worth - I had problems at one point with a digi setup
where it appeared that the TNC was deaf ... but the problem was that a
nearby power supply was putting out just enough hash to capture the FM
receiver. The hash wasn't obvious on a nearby handheld - I only noticed
it because when switching between battery and the power supply, the
audio output from the receiver would go way up on battery.
Perhaps something similar is affecting the OT2, but isn't obvious in the
variables that your exploring.
73 de chris K6DBG
- Greg NA2N wrote...
> OK - NOT trying to be a jerk here.We wouldn't want to accuse you or Elmer of being jerks. Your collective
postings speak for you.
> We are all VERY grateful for the input and attempts to be ofIf you are confident that you have looked at the easy stuff, perhaps
> assistance, but please trust me on this - we are HIGHLY confident that
> we've looked at the easy stuff.
it's time to look at the more difficult stuff. You could breadboard the
2211 circuit and see if you can duplicate the OT2M performance you are
seeing or improve upon it. The subject is "not functioning as a digi"
but I take it you have a problem with decoding signals rather than a
problem with the digi settings. However, at risk of being told that it's
"easy stuff" what settings do you have in...
SMARTBCON (I know... it's supposed to be a digi)
WAYPOINTS (I know... you probably don't have a GPS connected)
What do these have to do with decoding? Probably nothing. Heck... you
could do a DISPlay and post all of your settings.
> PLEASE - no more well-meaning but un-informed comments from the peanutgallery
Perhaps I should have just deleted this instead of clicking on send...
sigh. What an attitude! It's insulting to the other people on this list.
73 es cul - Keith VE7GDH
"I may be lost, but I know exactly where I am!"