Loading ...
Sorry, an error occurred while loading the content.

Re: [tracker2] APRSPoint and T2-135

Expand Messages
  • Andy AB9FX
    APRSPoint doesn t have option to work in KISS. APRSPoint can connect to AGWPE. AGWPE can connect to TNC in KISS. 73 Andy ... From: Scott Miller To:
    Message 1 of 4 , Feb 12, 2008
    • 0 Attachment
      APRSPoint doesn't have option to work in KISS. APRSPoint can connect to AGWPE. AGWPE can connect to TNC in KISS.
      73
      Andy
       
       
      ----- Original Message -----
      Sent: Tuesday, February 12, 2008 16:57
      Subject: Re: [tracker2] APRSPoint and T2-135

      No, not yet. And the biggest problem is that in KISS mode there's no
      supported way to do it - you'd have to run in converse mode, which I
      don't really recommend.

      Scott

      Gil Chapin wrote:
      >
      >
      > I've got a DR-135T with the T2 board in it. I've got a Deluo GPS
      > receiver connected to the front panel port. I want to use it with
      > APRS Point (only because it's easier to create accurate route maps for
      > special events in MapPoint). I've got it plotting received stations,
      > but I'd really like to get the GPS data into APRSPoint as well. I saw
      > another message about "pass through" but I didn't see an outcome to
      > that issue (as that writer pointed out, you can do this with a Kenwood
      > D700, and I have done it that way). I can connect another GPS
      > receiver to another input on the pc, but that seems impractical. Is
      > there a way to output the GPS data in addition to the received data
      > through port B?
      >
      >

    Your message has been successfully submitted and would be delivered to recipients shortly.