Loading ...
Sorry, an error occurred while loading the content.

Re: [tracker2] OT2m Dual Function

Expand Messages
  • Scott Miller
    The one example I ve seen of this seems to have been caused by adding a space between the + and the callsign. Scott
    Message 1 of 4 , Dec 23, 2007
    • 0 Attachment
      The one example I've seen of this seems to have been caused by adding a
      space between the + and the callsign.

      Scott

      Bruce W. Martin wrote:
      >
      >
      > I tried changing the AUTHLIST to a single callsign but still getting a
      > rejC or rejD acknowledgement.
      >
      > Bruce, KQ4TV
      >
      > On Dec 23, 2007, at 10:10 AM, P. Suryono Adisoemarta wrote:
      >
      > >
      > > I have a T2-135 board, and both serial ports are
      > > operating fine.
      > > A LaCrosse 2317 weather station plugged to the port B
      > > (set as WS2300), and port A, set as Auto, plugged to a
      > > laptop running APRSD, and so far (8 months continuous
      > > running) both ports are working fine.
      > >
      > > On the rejected remote commands, I can duplicate the
      > > problem if AUTHLIST contains more than 1 callsign.
      > > By keeping only 1 callsign, the remote command is
      > > working fine.
      > >
      > > 73 de Paulus - N5SNN / YD0NXX
      > >
      > >
      > >
      > > --- "Bruce W. Martin" <yahoo@... <mailto:yahoo%40bwm.us>> wrote:
      > >
      > >> I have confirmed that the OT2m can not work
      > >> simultaneously as a KISS
      > >> TNC and a WX station using the serial port. I had my
      > >> Ultimeeter II
      > >> pluged in to Port A , set for Auto and the Port B
      > >> set for KISS. As
      > >> long as the UII was the only thing pluged in the
      > >> OT2m sent out WX
      > >> packets and position packet with Temperature and
      > >> Voltage at the set
      > >> interval. As soon as I plug in the javAPRSSrvr to
      > >> Port B the OT2M only
      > >> sent out position packet with Temperature and
      > >> Voltage at the set
      > >> interval. The javAPRSSrvr would send and receive as
      > >> set up in it's
      > >> configuration.
      > >>
      > >> Is this the intended function? If i were using a
      > >> 1-wire WX station
      > >> plugged into the front would it function
      > >> differently?
      > >>
      > >>
      > >> Also I have tried several times sending commands via
      > >> a message from my
      > >> D700. Each time I get a reply of either rejB or
      > >> rejC. I just put:
      > >>
      > >> cmd interval 600
      > >>
      > >> in the body of the message that got back the rejB
      > >> and I put:
      > >>
      > >> cmd interval 600
      > >>
      > >> in the body of the message that got back the rejC.
      > >>
      > >> The callsign in the AUTHLIST matches the Callsign I
      > >> use on my D700.
      > >>
      > >> Am I doing something wrong?
      > >>
      > >> I really want to get a bunch of these and deploy
      > >> them at several digi
      > >> sites but I would like to get this stuff ironed out
      > >> first.
      > >>
      > >> Bruce
      > >>
      >
      > --
      > Bruce W. Martin, KQ4TV
      > Mt. Juliet, TN
      > EM66sf
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.