Re: [tracker2] T2 & Ultimeter II compatibility?
> Ok I created a "Y" cable to separate the the A and B ports. I want toThe ports should be identical, except for the lack of a console function
> hook my javAPRSSrvr and Ultimeter II to the T2. Is there a preferred
> port for each of these?
on port B.
> If the ports be set to AUTO and I hook up javAPRSSrvr to a port do IYou'd have to add the AMODE or BMODE KISS command. Better to leave the
> need to do anything to initialize into KISS and when I quit how do I
> take it out?
port in that mode all the time if that's an option.
> I tried putting javAPRSSrvr on Port A and the Ultimeter II on Port BTry /*AMODE KISS*/ instead.
> with both set as AUTO. Part of the initialization from javAPRSSrvr was
> to send AMODE KISS. That did not seem to work.
> I still need to check the radio side. I am using a FT-2600 and when IThere's a TXINVERT option if it's backwards, and you can also use SWDCD,
> set the Squelch to off the busy lamp on the radio stayed on all of the
> time and the RX lamp on the T2 went off. If I set the Squelch to
> anything other than off the RX lamp on the T2 stayed on all of the
> time and the busy lamp on the radio went off and only came on when it
> was receiving some signal.
which is usually preferred anyway.