Re: hookup vx-2r to ot2m prototype e
- We resolved this issue by building the HT4C cable shown on Byonics
site, then adding a 1K resistor between the Mic Audio In (Pin 1) and
PTT Out (Pin 3) and ignoring the PTT lead on the radio altogether.
Bryan A. Thompson
--- In email@example.com, "Bryan A. Thompson"
> We are having cable issues hooking the ot2m board to the vx-2r.
> The ot2m indicates it is trying to transmit but the radio never enters
> a transmit state.
> The recieve side works fine. Do you have cable info on how to hook up
> this particular combination?