Loading ...
Sorry, an error occurred while loading the content.

RE: [tracker2] Hamhud and Tracker 2

Expand Messages
  • 'Scott Miller'
    For the regular T2, you can set BMODE to FLOW and the second serial port is sacrificed for flow control. The T2-135 has the second serial port on the front
    Message 1 of 20 , Apr 12 4:33 PM
    • 0 Attachment
      For the regular T2, you can set BMODE to FLOW and the second serial port is sacrificed for flow control.  The T2-135 has the second serial port on the front panel and the Dallas 1-wire bus shares the CTS line, so you turn on flow control by setting 1WIRE OFF.
       
      Scott


      From: tracker2@yahoogroups.com [mailto:tracker2@yahoogroups.com] On Behalf Of Mark Miller
      Sent: Thursday, April 12, 2007 10:48 AM
      To: tracker2@yahoogroups.com
      Subject: RE: [tracker2] Hamhud and Tracker 2

      Is hardware flow control configurable on a T2 or is it on all of the time?
      73,
      Mark N5RFX

      At 11:31 AM 4/12/2007, you wrote:

      >The T2 is doing CTS/RTS flow control, not XON/XOFF.
      >
      >Scott

    Your message has been successfully submitted and would be delivered to recipients shortly.