Loading ...
Sorry, an error occurred while loading the content.

Re: T3-135 internal DR-135 TNC board

Expand Messages
  • Ron N9SZV
    So do you think it would have enough memory to send a email? Thanks Scott... Ron N9SZV
    Message 1 of 6 , Jul 16, 2013
    • 0 Attachment
      So do you think it would have enough memory to send a email? Thanks Scott...

      Ron N9SZV

      --- In tracker2@yahoogroups.com, Scott Miller <scott@...> wrote:
      >
      > I fixed the small packet problem. Last time I tried RMS Express it
      > seemed to be making connections OK, but I don't have a node in range to
      > properly test it with.
      >
      > Scott
      >
      > On 7/15/2013 2:54 PM, Randy Love wrote:
      > > However, I'm not sure that the T3-135 passes the control packets
      > > necessary for connected packet modes...
      > >
      > > And prior to that, I think it only accepted a small paclen, so if you
      > > sent it packets greater than about 128 chars, they would get lopped off,
      > > fail the crc, and never be received.
      > >
      > > I think that Scott was going to work on passing those control packets so
      > > the OT series was usable in connected packet modes, but not sure he
      > > completed/implemented it yet.
      > >
      > > Randy
      > > WF5X
      > >
      > >
      > >
      > > On Mon, Jul 15, 2013 at 5:10 PM, Keith VE7GDH <ve7gdh@...
      > > <mailto:ve7gdh@...>> wrote:
      > >
      > > __
      > >
      > > Ron N9SZV wrote...
      > >
      > >
      > >
      > > > Could I use this for running Win 2000 email software?
      > >
      > > I know that RMS Express can use a TNC in KISS mode, so
      > > the answer is probably yes.
      > >
      > > 73 es cul - Keith VE7GDH
      > > --
      > > "I may be lost, but I know exactly where I am!"
      > >
      > >
      > >
      >
    • Scott Miller
      I don t think RMS Express sends packets larger than 255 bytes, so it should be OK. Scott
      Message 2 of 6 , Jul 17, 2013
      • 0 Attachment
        I don't think RMS Express sends packets larger than 255 bytes, so it
        should be OK.

        Scott

        On 7/16/2013 2:40 PM, Ron N9SZV wrote:
        > So do you think it would have enough memory to send a email? Thanks Scott...
        >
        > Ron N9SZV
        >
        > --- In tracker2@yahoogroups.com <mailto:tracker2%40yahoogroups.com>,
        > Scott Miller <scott@...> wrote:
        > >
        > > I fixed the small packet problem. Last time I tried RMS Express it
        > > seemed to be making connections OK, but I don't have a node in range to
        > > properly test it with.
        > >
        > > Scott
        > >
        > > On 7/15/2013 2:54 PM, Randy Love wrote:
        > > > However, I'm not sure that the T3-135 passes the control packets
        > > > necessary for connected packet modes...
        > > >
        > > > And prior to that, I think it only accepted a small paclen, so if you
        > > > sent it packets greater than about 128 chars, they would get lopped
        > off,
        > > > fail the crc, and never be received.
        > > >
        > > > I think that Scott was going to work on passing those control
        > packets so
        > > > the OT series was usable in connected packet modes, but not sure he
        > > > completed/implemented it yet.
        > > >
        > > > Randy
        > > > WF5X
        > > >
        > > >
        > > >
        > > > On Mon, Jul 15, 2013 at 5:10 PM, Keith VE7GDH <ve7gdh@...
        > > > <mailto:ve7gdh@...>> wrote:
        > > >
        > > > __
        > > >
        > > > Ron N9SZV wrote...
        > > >
        > > >
        > > >
        > > > > Could I use this for running Win 2000 email software?
        > > >
        > > > I know that RMS Express can use a TNC in KISS mode, so
        > > > the answer is probably yes.
        > > >
        > > > 73 es cul - Keith VE7GDH
        > > > --
        > > > "I may be lost, but I know exactly where I am!"
        > > >
        > > >
        > > >
        > >
        >
        >
      Your message has been successfully submitted and would be delivered to recipients shortly.