Loading ...
Sorry, an error occurred while loading the content.

Re: [tracker2] otwincfg.exe to OT3 usb "Ready to connect. Please reset the tracker now."

Expand Messages
  • Scott Miller
    Sounds like something is hosed in the firmware, but the LED blink sequence tells you that the serial bootloader is intact. If you ve got a PC with a serial
    Message 1 of 3 , Jun 5, 2013
    • 0 Attachment
      Sounds like something is hosed in the firmware, but the LED blink
      sequence tells you that the serial bootloader is intact. If you've got
      a PC with a serial port and a null modem cable, you should still be able
      to connect to the serial port and recover it.

      You could also try jumpering it for safe mode (see the manual for
      details) and see if that makes a difference.

      Scott

      On 6/4/2013 5:15 PM, kevinshea83 wrote:
      > Was okay, but now having difficulty connecting the OT3 win configuration
      > program via usb?
      >
      > Everything was going smooth and I had successfully configured the OT3
      > and also had the Nuvi350 serial networking! However, in the last day or
      > two the OT3 has stop communicating. I have yet to connect the radio
      > serial and transmitting out to APRS, but was in the process of this last
      > piece to try out the OT3 when I noticed I can no longer connect with the
      > wincfg pgm. (The Nuve comes-up with a lost serial message) I've since
      > removed both serial connections and just have the usb to OT3 but still
      > see the message to reset the tracker?
      >
      > On otwincfg startup(latest version)I'm receiving a "Ready to connect.
      > Please reset the tracker now." message in the "Connect to Tracker"
      > dialog box
      >
      > I can't erase and reload the current firmware as I receive the same message.
      >
      > I tried a second pc and same results?
      >
      > When powering up the ot3 with a usb /pc connect, I see the 3 LED color
      > lights in the TX/RX and light turns off. The ACT red light is on.
      >
      > I have not tried another usb cable? Can I reset this OT3?
      >
      > Thank you,
      >
      > Kevin Shea
      > KC2RTR
      >
      >
    • Kevin Shea
      Thanks Scott. I was able reload the latest firmware and recover using the null modem serial cable. Sent from my iPod
      Message 2 of 3 , Jun 7, 2013
      • 0 Attachment
        Thanks Scott. I was able reload the latest firmware and recover using the null modem serial cable.

        Sent from my iPod

        On Jun 5, 2013, at 11:50 AM, Scott Miller <scott@...> wrote:

        > Sounds like something is hosed in the firmware, but the LED blink
        > sequence tells you that the serial bootloader is intact. If you've got
        > a PC with a serial port and a null modem cable, you should still be able
        > to connect to the serial port and recover it.
        >
        > You could also try jumpering it for safe mode (see the manual for
        > details) and see if that makes a difference.
        >
        > Scott
        >
        > On 6/4/2013 5:15 PM, kevinshea83 wrote:
        >> Was okay, but now having difficulty connecting the OT3 win configuration
        >> program via usb?
        >>
        >> Everything was going smooth and I had successfully configured the OT3
        >> and also had the Nuvi350 serial networking! However, in the last day or
        >> two the OT3 has stop communicating. I have yet to connect the radio
        >> serial and transmitting out to APRS, but was in the process of this last
        >> piece to try out the OT3 when I noticed I can no longer connect with the
        >> wincfg pgm. (The Nuve comes-up with a lost serial message) I've since
        >> removed both serial connections and just have the usb to OT3 but still
        >> see the message to reset the tracker?
        >>
        >> On otwincfg startup(latest version)I'm receiving a "Ready to connect.
        >> Please reset the tracker now." message in the "Connect to Tracker"
        >> dialog box
        >>
        >> I can't erase and reload the current firmware as I receive the same message.
        >>
        >> I tried a second pc and same results?
        >>
        >> When powering up the ot3 with a usb /pc connect, I see the 3 LED color
        >> lights in the TX/RX and light turns off. The ACT red light is on.
        >>
        >> I have not tried another usb cable? Can I reset this OT3?
        >>
        >> Thank you,
        >>
        >> Kevin Shea
        >> KC2RTR
        >
        >
        > ------------------------------------
        >
        > Yahoo! Groups Links
        >
        >
        >
      Your message has been successfully submitted and would be delivered to recipients shortly.