Re: [tracker2] Re: Yaesu FT-1500M Cable
- Thanks to all who responded. Haven't got the cable built yet, but hope to do it soon.
From: captnkliegle <kliegle@...>
Sent: Sunday, March 17, 2013 6:52 AM
Subject: [tracker2] Re: Yaesu FT-1500M Cable
The six pin mini DIN is standard, same pinouts on Yaesu, Icom, etc.
If you buy the cable from Argentdata:
Read the reviews for pinouts. Should be correct unless the MFG changed wire colors or pins.
73 de Kriss KA1GJU
--- In firstname.lastname@example.org, Marcel S <ki6qdj@...> wrote:
> Assuming you are using the Argent Data Systems trackers then you will be
> using the Radio connector. Refer to page 2 of the OTUSB Manual for example:
> 1500M => Tracker
> Pin 1 - data in => Pin 1 - audio out
> Pin 2 - ground => Pin 6 - ground
> Pin 3 - pkt ptt => Pin 3 - ptt out
> Pin 5 - data out 1200bps => Pin 5 - audio in
> That should do the trick.
> -Marcel AI6MS/9G5MS