Loading ...
Sorry, an error occurred while loading the content.

Re: [tracker2] Re: Yaesu FT-1500M Cable

Expand Messages
  • Paul Martin
    Thanks to all who responded. Haven t got the cable built yet, but hope to do it soon. Thanks, 73 Paul KJ4YOJ ________________________________ From:
    Message 1 of 7 , Mar 28, 2013
    View Source
    • 0 Attachment
      Thanks to all who responded. Haven't got the cable built yet, but hope to do it soon.

      Thanks, 73
      Paul KJ4YOJ

      ________________________________
      From: captnkliegle <kliegle@...>
      To: tracker2@yahoogroups.com
      Sent: Sunday, March 17, 2013 6:52 AM
      Subject: [tracker2] Re: Yaesu FT-1500M Cable

      The six pin mini DIN is standard, same pinouts on Yaesu, Icom, etc.
      If you buy the cable from Argentdata:
      https://www.argentdata.com/catalog/product_info.php?cPath=21&products_id=38&osCsid=u9cbufdddi9mve52rli1gtefe2

      Read the reviews for pinouts. Should be correct unless the MFG changed wire colors or pins.

      73 de Kriss KA1GJU

      --- In tracker2@yahoogroups.com, Marcel S <ki6qdj@...> wrote:
      >
      > Assuming you are using the Argent Data Systems trackers then you will be
      > using the Radio connector. Refer to page 2 of the OTUSB Manual for example:
      >
      > 1500M => Tracker
      > Pin 1 - data in => Pin 1 - audio out
      > Pin 2 - ground => Pin 6 - ground
      > Pin 3 - pkt ptt => Pin 3 - ptt out
      > Pin 5 - data out 1200bps => Pin 5 - audio in
      >
      > That should do the trick.
      >
      > -Marcel AI6MS/9G5MS
    Your message has been successfully submitted and would be delivered to recipients shortly.