Loading ...
Sorry, an error occurred while loading the content.

Re: [tracker2] t3-mini any way of getting it to speak i2c?

Expand Messages
  • Scott Miller
    GP3 and GP4 are the MCU s SCL and SDA pins, respectively. Right now the only time they re used that way is if you set a bit in flash that tells it there s an
    Message 1 of 2 , Mar 25, 2013
    • 0 Attachment
      GP3 and GP4 are the MCU's SCL and SDA pins, respectively. Right now the
      only time they're used that way is if you set a bit in flash that tells
      it there's an MX145 radio attached, and then it lets you use SETFREQ to
      configure it.

      Scott

      On 3/25/2013 5:43 AM, Eric Fort wrote:
      > Scott et al,
      >
      > might there be any way to get the t3-mini to speak i2c or maybe spi on
      > a few pins? if so, I'm thinking we might be able to drop the cost of a
      > t3-301 equivelent tracker substantially and make it weigh somewhat less
      > possibly with onboard gps included.
      >
      > Eric
      > AF6EP
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.