Loading ...
Sorry, an error occurred while loading the content.

Re: [tracker2] Tracker3 T3-Mini board

Expand Messages
  • Scott Miller
    I do have code written for the OTUSB to use those, but I ve got to double check that all the required signals are available on the Mini board. They should be,
    Message 1 of 5 , Mar 21, 2013
    • 0 Attachment
      I do have code written for the OTUSB to use those, but I've got to
      double check that all the required signals are available on the Mini
      board. They should be, but I didn't design it specifically with that in
      mind.

      Scott

      On 3/21/2013 10:51 AM, Bill Vodall wrote:
      > On Wed, Mar 20, 2013 at 11:26 AM, Scott Miller <scott@...
      > <mailto:scott%40opentrac.org>> wrote:
      > > Hi all,
      > >
      > > We've just started shipping the new T3-Mini board.
      >
      > > The mini USB port makes this board much easier to configure - no fussing
      > > with adapters or worrying about whether you're using it in RS-232 or TTL
      > > mode. It's also got 13 general-purpose I/O pins and the scripting
      > > features of the regular T3, which should be useful for balloon payloads
      > > and automation tasks.
      >
      > Will this work with the UHF .5 watt transceiver modules you're
      > selling? Yeah I know - I need to get ask, buy a couple and get them
      > on the air.
      >
      > Bill,
      > WA7NWP
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.