Loading ...
Sorry, an error occurred while loading the content.

Re: [tracker2] Yaesu FT-1500M Cable

Expand Messages
  • Marcel S
    Assuming you are using the Argent Data Systems trackers then you will be using the Radio connector. Refer to page 2 of the OTUSB Manual for example: 1500M =
    Message 1 of 7 , Mar 16, 2013
    • 0 Attachment

      Assuming you are using the Argent Data Systems trackers then you will be using the Radio connector. Refer to page 2 of the OTUSB Manual for example:

      1500M => Tracker
      Pin 1 - data in => Pin 1 - audio out
      Pin 2 - ground => Pin 6 - ground
      Pin 3 - pkt ptt => Pin 3 - ptt out
      Pin 5 - data out 1200bps => Pin 5 - audio in

      That should do the trick.

      -Marcel AI6MS/9G5MS

      On Mar 16, 2013 3:20 PM, "Paul Martin" <thedeer_slayer@...> wrote:
       

      Thanks.  So which one go to which pin on the TNC side?
       

      Thanks, 73
      Paul KJ4YOJ


      From: Marcel S <ki6qdj@...>
      To: tracker2@yahoogroups.com
      Sent: Saturday, March 16, 2013 9:22 AM
      Subject: Re: [tracker2] Yaesu FT-1500M Cable

       
      Per the 1500M manual:
      Pin 1 - data in
      Pin 2 - ground
      Pin 3 - pkt ptt
      Pin 4 - data out 9600bps
      Pin 5 - data out 1200bps
      Pin 6 - squelch
      You should only need data in and out 1200 plus ground and squelch. The data port is really nice on the back because you still have full use of the hand mic or can disconnect it all together.
      Cheers,
      -Marcel AI6MS/9G5MS
      On Mar 16, 2013 11:09 AM, "thedeer_slayer" <thedeer_slayer@...> wrote:
       
      Does anyone have the correct pinout for building a 6 Pin Mini-Din Cable for a FT-1500M?

      Thanks, 73
      Paul KJ4YOJ



    • captnkliegle
      The six pin mini DIN is standard, same pinouts on Yaesu, Icom, etc. If you buy the cable from Argentdata:
      Message 2 of 7 , Mar 17, 2013
      • 0 Attachment
        The six pin mini DIN is standard, same pinouts on Yaesu, Icom, etc.
        If you buy the cable from Argentdata:
        https://www.argentdata.com/catalog/product_info.php?cPath=21&products_id=38&osCsid=u9cbufdddi9mve52rli1gtefe2

        Read the reviews for pinouts. Should be correct unless the MFG changed wire colors or pins.

        73 de Kriss KA1GJU


        --- In tracker2@yahoogroups.com, Marcel S <ki6qdj@...> wrote:
        >
        > Assuming you are using the Argent Data Systems trackers then you will be
        > using the Radio connector. Refer to page 2 of the OTUSB Manual for example:
        >
        > 1500M => Tracker
        > Pin 1 - data in => Pin 1 - audio out
        > Pin 2 - ground => Pin 6 - ground
        > Pin 3 - pkt ptt => Pin 3 - ptt out
        > Pin 5 - data out 1200bps => Pin 5 - audio in
        >
        > That should do the trick.
        >
        > -Marcel AI6MS/9G5MS
        > On Mar 16, 2013 3:20 PM, "Paul Martin" <thedeer_slayer@...> wrote:
        >
        > > **
        > >
        > >
        > > Thanks. So which one go to which pin on the TNC side?
        > >
        > >
        > > Thanks, 73
        > > Paul KJ4YOJ
        > >
        > > ------------------------------
        > > *From:* Marcel S <ki6qdj@...>
        > > *To:* tracker2@yahoogroups.com
        > > *Sent:* Saturday, March 16, 2013 9:22 AM
        > > *Subject:* Re: [tracker2] Yaesu FT-1500M Cable
        > >
        > >
        > > Per the 1500M manual:
        > > Pin 1 - data in
        > > Pin 2 - ground
        > > Pin 3 - pkt ptt
        > > Pin 4 - data out 9600bps
        > > Pin 5 - data out 1200bps
        > > Pin 6 - squelch
        > > You should only need data in and out 1200 plus ground and squelch. The
        > > data port is really nice on the back because you still have full use of the
        > > hand mic or can disconnect it all together.
        > > Cheers,
        > > -Marcel AI6MS/9G5MS
        > > On Mar 16, 2013 11:09 AM, "thedeer_slayer" <thedeer_slayer@...>
        > > wrote:
        > >
        > > **
        > >
        > > Does anyone have the correct pinout for building a 6 Pin Mini-Din Cable
        > > for a FT-1500M?
        > >
        > > Thanks, 73
        > > Paul KJ4YOJ
        > >
        > >
        > >
        > >
        > >
        >
      • Paul Martin
        Thanks to all who responded. Haven t got the cable built yet, but hope to do it soon. Thanks, 73 Paul KJ4YOJ ________________________________ From:
        Message 3 of 7 , Mar 28, 2013
        • 0 Attachment
          Thanks to all who responded. Haven't got the cable built yet, but hope to do it soon.

          Thanks, 73
          Paul KJ4YOJ

          ________________________________
          From: captnkliegle <kliegle@...>
          To: tracker2@yahoogroups.com
          Sent: Sunday, March 17, 2013 6:52 AM
          Subject: [tracker2] Re: Yaesu FT-1500M Cable

          The six pin mini DIN is standard, same pinouts on Yaesu, Icom, etc.
          If you buy the cable from Argentdata:
          https://www.argentdata.com/catalog/product_info.php?cPath=21&products_id=38&osCsid=u9cbufdddi9mve52rli1gtefe2

          Read the reviews for pinouts. Should be correct unless the MFG changed wire colors or pins.

          73 de Kriss KA1GJU

          --- In tracker2@yahoogroups.com, Marcel S <ki6qdj@...> wrote:
          >
          > Assuming you are using the Argent Data Systems trackers then you will be
          > using the Radio connector. Refer to page 2 of the OTUSB Manual for example:
          >
          > 1500M => Tracker
          > Pin 1 - data in => Pin 1 - audio out
          > Pin 2 - ground => Pin 6 - ground
          > Pin 3 - pkt ptt => Pin 3 - ptt out
          > Pin 5 - data out 1200bps => Pin 5 - audio in
          >
          > That should do the trick.
          >
          > -Marcel AI6MS/9G5MS
        Your message has been successfully submitted and would be delivered to recipients shortly.