Loading ...
Sorry, an error occurred while loading the content.

Re: [tracker2] Yaesu FT-1500M Cable

Expand Messages
  • Marcel S
    Per the 1500M manual: Pin 1 - data in Pin 2 - ground Pin 3 - pkt ptt Pin 4 - data out 9600bps Pin 5 - data out 1200bps Pin 6 - squelch You should only need
    Message 1 of 7 , Mar 16, 2013
    • 0 Attachment

      Per the 1500M manual:
      Pin 1 - data in
      Pin 2 - ground
      Pin 3 - pkt ptt
      Pin 4 - data out 9600bps
      Pin 5 - data out 1200bps
      Pin 6 - squelch

      You should only need data in and out 1200 plus ground and squelch. The data port is really nice on the back because you still have full use of the hand mic or can disconnect it all together.

      Cheers,

      -Marcel AI6MS/9G5MS

      On Mar 16, 2013 11:09 AM, "thedeer_slayer" <thedeer_slayer@...> wrote:
       

      Does anyone have the correct pinout for building a 6 Pin Mini-Din Cable for a FT-1500M?

      Thanks, 73
      Paul KJ4YOJ

    • Paul Martin
      Thanks.  So which one go to which pin on the TNC side?   Thanks, 73 Paul KJ4YOJ ________________________________ From: Marcel S To:
      Message 2 of 7 , Mar 16, 2013
      • 0 Attachment
        Thanks.  So which one go to which pin on the TNC side?
         

        Thanks, 73
        Paul KJ4YOJ


        From: Marcel S <ki6qdj@...>
        To: tracker2@yahoogroups.com
        Sent: Saturday, March 16, 2013 9:22 AM
        Subject: Re: [tracker2] Yaesu FT-1500M Cable

         
        Per the 1500M manual:
        Pin 1 - data in
        Pin 2 - ground
        Pin 3 - pkt ptt
        Pin 4 - data out 9600bps
        Pin 5 - data out 1200bps
        Pin 6 - squelch
        You should only need data in and out 1200 plus ground and squelch. The data port is really nice on the back because you still have full use of the hand mic or can disconnect it all together.
        Cheers,
        -Marcel AI6MS/9G5MS
        On Mar 16, 2013 11:09 AM, "thedeer_slayer" <thedeer_slayer@...> wrote:
         
        Does anyone have the correct pinout for building a 6 Pin Mini-Din Cable for a FT-1500M?

        Thanks, 73
        Paul KJ4YOJ



      • James Ewen
        ... Straight from the wiki... http://wiki.argentdata.com/index.php?title=Radio_Wiring PinFunction1Audio output (tracker to radio)2Squelch input3PTT
        Message 3 of 7 , Mar 16, 2013
        • 0 Attachment
          On Sat, Mar 16, 2013 at 8:40 AM, Paul Martin <thedeer_slayer@...> wrote:


          Thanks.  So which one go to which pin on the TNC side?


          Straight from the wiki... 


          PinFunction
          1Audio output (tracker to radio)
          2Squelch input
          3PTT output
          5Audio input (radio to tracker)
          6Ground
          7Power input
          8PTT input (for mic encoder use only)
           
          --
          James
          VE6SRV
        • Marcel S
          Assuming you are using the Argent Data Systems trackers then you will be using the Radio connector. Refer to page 2 of the OTUSB Manual for example: 1500M =
          Message 4 of 7 , Mar 16, 2013
          • 0 Attachment

            Assuming you are using the Argent Data Systems trackers then you will be using the Radio connector. Refer to page 2 of the OTUSB Manual for example:

            1500M => Tracker
            Pin 1 - data in => Pin 1 - audio out
            Pin 2 - ground => Pin 6 - ground
            Pin 3 - pkt ptt => Pin 3 - ptt out
            Pin 5 - data out 1200bps => Pin 5 - audio in

            That should do the trick.

            -Marcel AI6MS/9G5MS

            On Mar 16, 2013 3:20 PM, "Paul Martin" <thedeer_slayer@...> wrote:
             

            Thanks.  So which one go to which pin on the TNC side?
             

            Thanks, 73
            Paul KJ4YOJ


            From: Marcel S <ki6qdj@...>
            To: tracker2@yahoogroups.com
            Sent: Saturday, March 16, 2013 9:22 AM
            Subject: Re: [tracker2] Yaesu FT-1500M Cable

             
            Per the 1500M manual:
            Pin 1 - data in
            Pin 2 - ground
            Pin 3 - pkt ptt
            Pin 4 - data out 9600bps
            Pin 5 - data out 1200bps
            Pin 6 - squelch
            You should only need data in and out 1200 plus ground and squelch. The data port is really nice on the back because you still have full use of the hand mic or can disconnect it all together.
            Cheers,
            -Marcel AI6MS/9G5MS
            On Mar 16, 2013 11:09 AM, "thedeer_slayer" <thedeer_slayer@...> wrote:
             
            Does anyone have the correct pinout for building a 6 Pin Mini-Din Cable for a FT-1500M?

            Thanks, 73
            Paul KJ4YOJ



          • captnkliegle
            The six pin mini DIN is standard, same pinouts on Yaesu, Icom, etc. If you buy the cable from Argentdata:
            Message 5 of 7 , Mar 17, 2013
            • 0 Attachment
              The six pin mini DIN is standard, same pinouts on Yaesu, Icom, etc.
              If you buy the cable from Argentdata:
              https://www.argentdata.com/catalog/product_info.php?cPath=21&products_id=38&osCsid=u9cbufdddi9mve52rli1gtefe2

              Read the reviews for pinouts. Should be correct unless the MFG changed wire colors or pins.

              73 de Kriss KA1GJU


              --- In tracker2@yahoogroups.com, Marcel S <ki6qdj@...> wrote:
              >
              > Assuming you are using the Argent Data Systems trackers then you will be
              > using the Radio connector. Refer to page 2 of the OTUSB Manual for example:
              >
              > 1500M => Tracker
              > Pin 1 - data in => Pin 1 - audio out
              > Pin 2 - ground => Pin 6 - ground
              > Pin 3 - pkt ptt => Pin 3 - ptt out
              > Pin 5 - data out 1200bps => Pin 5 - audio in
              >
              > That should do the trick.
              >
              > -Marcel AI6MS/9G5MS
              > On Mar 16, 2013 3:20 PM, "Paul Martin" <thedeer_slayer@...> wrote:
              >
              > > **
              > >
              > >
              > > Thanks. So which one go to which pin on the TNC side?
              > >
              > >
              > > Thanks, 73
              > > Paul KJ4YOJ
              > >
              > > ------------------------------
              > > *From:* Marcel S <ki6qdj@...>
              > > *To:* tracker2@yahoogroups.com
              > > *Sent:* Saturday, March 16, 2013 9:22 AM
              > > *Subject:* Re: [tracker2] Yaesu FT-1500M Cable
              > >
              > >
              > > Per the 1500M manual:
              > > Pin 1 - data in
              > > Pin 2 - ground
              > > Pin 3 - pkt ptt
              > > Pin 4 - data out 9600bps
              > > Pin 5 - data out 1200bps
              > > Pin 6 - squelch
              > > You should only need data in and out 1200 plus ground and squelch. The
              > > data port is really nice on the back because you still have full use of the
              > > hand mic or can disconnect it all together.
              > > Cheers,
              > > -Marcel AI6MS/9G5MS
              > > On Mar 16, 2013 11:09 AM, "thedeer_slayer" <thedeer_slayer@...>
              > > wrote:
              > >
              > > **
              > >
              > > Does anyone have the correct pinout for building a 6 Pin Mini-Din Cable
              > > for a FT-1500M?
              > >
              > > Thanks, 73
              > > Paul KJ4YOJ
              > >
              > >
              > >
              > >
              > >
              >
            • Paul Martin
              Thanks to all who responded. Haven t got the cable built yet, but hope to do it soon. Thanks, 73 Paul KJ4YOJ ________________________________ From:
              Message 6 of 7 , Mar 28, 2013
              • 0 Attachment
                Thanks to all who responded. Haven't got the cable built yet, but hope to do it soon.

                Thanks, 73
                Paul KJ4YOJ

                ________________________________
                From: captnkliegle <kliegle@...>
                To: tracker2@yahoogroups.com
                Sent: Sunday, March 17, 2013 6:52 AM
                Subject: [tracker2] Re: Yaesu FT-1500M Cable

                The six pin mini DIN is standard, same pinouts on Yaesu, Icom, etc.
                If you buy the cable from Argentdata:
                https://www.argentdata.com/catalog/product_info.php?cPath=21&products_id=38&osCsid=u9cbufdddi9mve52rli1gtefe2

                Read the reviews for pinouts. Should be correct unless the MFG changed wire colors or pins.

                73 de Kriss KA1GJU

                --- In tracker2@yahoogroups.com, Marcel S <ki6qdj@...> wrote:
                >
                > Assuming you are using the Argent Data Systems trackers then you will be
                > using the Radio connector. Refer to page 2 of the OTUSB Manual for example:
                >
                > 1500M => Tracker
                > Pin 1 - data in => Pin 1 - audio out
                > Pin 2 - ground => Pin 6 - ground
                > Pin 3 - pkt ptt => Pin 3 - ptt out
                > Pin 5 - data out 1200bps => Pin 5 - audio in
                >
                > That should do the trick.
                >
                > -Marcel AI6MS/9G5MS
              Your message has been successfully submitted and would be delivered to recipients shortly.