Loading ...
Sorry, an error occurred while loading the content.

Yaesu FT-1500M Cable

Expand Messages
  • thedeer_slayer
    Does anyone have the correct pinout for building a 6 Pin Mini-Din Cable for a FT-1500M? Thanks, 73 Paul KJ4YOJ
    Message 1 of 7 , Mar 15, 2013
    • 0 Attachment
      Does anyone have the correct pinout for building a 6 Pin Mini-Din Cable for a FT-1500M?

      Thanks, 73
      Paul KJ4YOJ
    • Marcel S
      Per the 1500M manual: Pin 1 - data in Pin 2 - ground Pin 3 - pkt ptt Pin 4 - data out 9600bps Pin 5 - data out 1200bps Pin 6 - squelch You should only need
      Message 2 of 7 , Mar 16, 2013
      • 0 Attachment

        Per the 1500M manual:
        Pin 1 - data in
        Pin 2 - ground
        Pin 3 - pkt ptt
        Pin 4 - data out 9600bps
        Pin 5 - data out 1200bps
        Pin 6 - squelch

        You should only need data in and out 1200 plus ground and squelch. The data port is really nice on the back because you still have full use of the hand mic or can disconnect it all together.

        Cheers,

        -Marcel AI6MS/9G5MS

        On Mar 16, 2013 11:09 AM, "thedeer_slayer" <thedeer_slayer@...> wrote:
         

        Does anyone have the correct pinout for building a 6 Pin Mini-Din Cable for a FT-1500M?

        Thanks, 73
        Paul KJ4YOJ

      • Paul Martin
        Thanks.  So which one go to which pin on the TNC side?   Thanks, 73 Paul KJ4YOJ ________________________________ From: Marcel S To:
        Message 3 of 7 , Mar 16, 2013
        • 0 Attachment
          Thanks.  So which one go to which pin on the TNC side?
           

          Thanks, 73
          Paul KJ4YOJ


          From: Marcel S <ki6qdj@...>
          To: tracker2@yahoogroups.com
          Sent: Saturday, March 16, 2013 9:22 AM
          Subject: Re: [tracker2] Yaesu FT-1500M Cable

           
          Per the 1500M manual:
          Pin 1 - data in
          Pin 2 - ground
          Pin 3 - pkt ptt
          Pin 4 - data out 9600bps
          Pin 5 - data out 1200bps
          Pin 6 - squelch
          You should only need data in and out 1200 plus ground and squelch. The data port is really nice on the back because you still have full use of the hand mic or can disconnect it all together.
          Cheers,
          -Marcel AI6MS/9G5MS
          On Mar 16, 2013 11:09 AM, "thedeer_slayer" <thedeer_slayer@...> wrote:
           
          Does anyone have the correct pinout for building a 6 Pin Mini-Din Cable for a FT-1500M?

          Thanks, 73
          Paul KJ4YOJ



        • James Ewen
          ... Straight from the wiki... http://wiki.argentdata.com/index.php?title=Radio_Wiring PinFunction1Audio output (tracker to radio)2Squelch input3PTT
          Message 4 of 7 , Mar 16, 2013
          • 0 Attachment
            On Sat, Mar 16, 2013 at 8:40 AM, Paul Martin <thedeer_slayer@...> wrote:


            Thanks.  So which one go to which pin on the TNC side?


            Straight from the wiki... 


            PinFunction
            1Audio output (tracker to radio)
            2Squelch input
            3PTT output
            5Audio input (radio to tracker)
            6Ground
            7Power input
            8PTT input (for mic encoder use only)
             
            --
            James
            VE6SRV
          • Marcel S
            Assuming you are using the Argent Data Systems trackers then you will be using the Radio connector. Refer to page 2 of the OTUSB Manual for example: 1500M =
            Message 5 of 7 , Mar 16, 2013
            • 0 Attachment

              Assuming you are using the Argent Data Systems trackers then you will be using the Radio connector. Refer to page 2 of the OTUSB Manual for example:

              1500M => Tracker
              Pin 1 - data in => Pin 1 - audio out
              Pin 2 - ground => Pin 6 - ground
              Pin 3 - pkt ptt => Pin 3 - ptt out
              Pin 5 - data out 1200bps => Pin 5 - audio in

              That should do the trick.

              -Marcel AI6MS/9G5MS

              On Mar 16, 2013 3:20 PM, "Paul Martin" <thedeer_slayer@...> wrote:
               

              Thanks.  So which one go to which pin on the TNC side?
               

              Thanks, 73
              Paul KJ4YOJ


              From: Marcel S <ki6qdj@...>
              To: tracker2@yahoogroups.com
              Sent: Saturday, March 16, 2013 9:22 AM
              Subject: Re: [tracker2] Yaesu FT-1500M Cable

               
              Per the 1500M manual:
              Pin 1 - data in
              Pin 2 - ground
              Pin 3 - pkt ptt
              Pin 4 - data out 9600bps
              Pin 5 - data out 1200bps
              Pin 6 - squelch
              You should only need data in and out 1200 plus ground and squelch. The data port is really nice on the back because you still have full use of the hand mic or can disconnect it all together.
              Cheers,
              -Marcel AI6MS/9G5MS
              On Mar 16, 2013 11:09 AM, "thedeer_slayer" <thedeer_slayer@...> wrote:
               
              Does anyone have the correct pinout for building a 6 Pin Mini-Din Cable for a FT-1500M?

              Thanks, 73
              Paul KJ4YOJ



            • captnkliegle
              The six pin mini DIN is standard, same pinouts on Yaesu, Icom, etc. If you buy the cable from Argentdata:
              Message 6 of 7 , Mar 17, 2013
              • 0 Attachment
                The six pin mini DIN is standard, same pinouts on Yaesu, Icom, etc.
                If you buy the cable from Argentdata:
                https://www.argentdata.com/catalog/product_info.php?cPath=21&products_id=38&osCsid=u9cbufdddi9mve52rli1gtefe2

                Read the reviews for pinouts. Should be correct unless the MFG changed wire colors or pins.

                73 de Kriss KA1GJU


                --- In tracker2@yahoogroups.com, Marcel S <ki6qdj@...> wrote:
                >
                > Assuming you are using the Argent Data Systems trackers then you will be
                > using the Radio connector. Refer to page 2 of the OTUSB Manual for example:
                >
                > 1500M => Tracker
                > Pin 1 - data in => Pin 1 - audio out
                > Pin 2 - ground => Pin 6 - ground
                > Pin 3 - pkt ptt => Pin 3 - ptt out
                > Pin 5 - data out 1200bps => Pin 5 - audio in
                >
                > That should do the trick.
                >
                > -Marcel AI6MS/9G5MS
                > On Mar 16, 2013 3:20 PM, "Paul Martin" <thedeer_slayer@...> wrote:
                >
                > > **
                > >
                > >
                > > Thanks. So which one go to which pin on the TNC side?
                > >
                > >
                > > Thanks, 73
                > > Paul KJ4YOJ
                > >
                > > ------------------------------
                > > *From:* Marcel S <ki6qdj@...>
                > > *To:* tracker2@yahoogroups.com
                > > *Sent:* Saturday, March 16, 2013 9:22 AM
                > > *Subject:* Re: [tracker2] Yaesu FT-1500M Cable
                > >
                > >
                > > Per the 1500M manual:
                > > Pin 1 - data in
                > > Pin 2 - ground
                > > Pin 3 - pkt ptt
                > > Pin 4 - data out 9600bps
                > > Pin 5 - data out 1200bps
                > > Pin 6 - squelch
                > > You should only need data in and out 1200 plus ground and squelch. The
                > > data port is really nice on the back because you still have full use of the
                > > hand mic or can disconnect it all together.
                > > Cheers,
                > > -Marcel AI6MS/9G5MS
                > > On Mar 16, 2013 11:09 AM, "thedeer_slayer" <thedeer_slayer@...>
                > > wrote:
                > >
                > > **
                > >
                > > Does anyone have the correct pinout for building a 6 Pin Mini-Din Cable
                > > for a FT-1500M?
                > >
                > > Thanks, 73
                > > Paul KJ4YOJ
                > >
                > >
                > >
                > >
                > >
                >
              • Paul Martin
                Thanks to all who responded. Haven t got the cable built yet, but hope to do it soon. Thanks, 73 Paul KJ4YOJ ________________________________ From:
                Message 7 of 7 , Mar 28, 2013
                • 0 Attachment
                  Thanks to all who responded. Haven't got the cable built yet, but hope to do it soon.

                  Thanks, 73
                  Paul KJ4YOJ

                  ________________________________
                  From: captnkliegle <kliegle@...>
                  To: tracker2@yahoogroups.com
                  Sent: Sunday, March 17, 2013 6:52 AM
                  Subject: [tracker2] Re: Yaesu FT-1500M Cable

                  The six pin mini DIN is standard, same pinouts on Yaesu, Icom, etc.
                  If you buy the cable from Argentdata:
                  https://www.argentdata.com/catalog/product_info.php?cPath=21&products_id=38&osCsid=u9cbufdddi9mve52rli1gtefe2

                  Read the reviews for pinouts. Should be correct unless the MFG changed wire colors or pins.

                  73 de Kriss KA1GJU

                  --- In tracker2@yahoogroups.com, Marcel S <ki6qdj@...> wrote:
                  >
                  > Assuming you are using the Argent Data Systems trackers then you will be
                  > using the Radio connector. Refer to page 2 of the OTUSB Manual for example:
                  >
                  > 1500M => Tracker
                  > Pin 1 - data in => Pin 1 - audio out
                  > Pin 2 - ground => Pin 6 - ground
                  > Pin 3 - pkt ptt => Pin 3 - ptt out
                  > Pin 5 - data out 1200bps => Pin 5 - audio in
                  >
                  > That should do the trick.
                  >
                  > -Marcel AI6MS/9G5MS
                Your message has been successfully submitted and would be delivered to recipients shortly.