Loading ...
Sorry, an error occurred while loading the content.

Re: [tracker2] Re: OT3m power relay on after digi

Expand Messages
  • Scott Miller
    That s probably best. Even if I was to add power control to digi transmissions, it would be on a transmission-by-transmission basis and wouldn t do what you
    Message 1 of 6 , Feb 14, 2013
    • 0 Attachment
      That's probably best. Even if I was to add power control to digi
      transmissions, it would be on a transmission-by-transmission basis and
      wouldn't do what you want. You can just define a macro, or use profile
      switching to alternate between attended and unattended operation.

      Scott

      On 2/13/2013 6:09 AM, Thomas wrote:
      >
      >
      > I am using the USEALIAS 1 ON/OFF command, good idea to set up a script
      > I will try that
      >
      > Thomas
      >
      > --- In tracker2@yahoogroups.com <mailto:tracker2%40yahoogroups.com>,
      > Scott Miller wrote:
      > >
      > > How are you turning on and off the digi function? You could probably
      > > set up a script to do what you want.
      > >
      > > Scott
      > >
      > > On 2/11/2013 6:29 AM, Thomas wrote:
      > > >
      > > >
      > > > --- In tracker2@yahoogroups.com <mailto:tracker2%40yahoogroups.com> ,
      > > > Scott Miller wrote:
      > > > >I understand the reason for that design. I am using the OT as an
      > > > unattended tracker and let the OT power up my radio when it's time
      > for a
      > > > beacon. In attended mode I power on my radio manually and turn on the
      > > > digi function. When I go back to unattended mode I have to "power down"
      > > > the relay with the power off command or switch the power off and on to
      > > > the tracker.
      > > > Otherwise I leaves my radio with the power on.
      > > > But I can handle the situation know when I am aware of the design.
      > > >
      > > > Thanks
      > > > /Thomas
      > > >
      > > > > It was always assumed in the design that you wouldn't use power
      > control
      > > > > with a digi, since it can't receive packets to digipeat when it's
      > turned
      > > > > off...
      > > > >
      > > > > Scott
      > > > >
      > > > > On 2/9/2013 2:11 AM, Thomas wrote:
      > > > > > It seems to be the same problem with power control when digi as for
      > > > aprs
      > > > > > message.
      > > > > > I am using my excellent tracker as a digipeater but the power relay
      > > > > > stays on after sending out the packet
      > > > > > Firmware: 56330
      > > > > >
      > > > > > Thomas SM0YOS
      > > > > >
      > > > > >
      > > > >
      > > >
      > > >
      > >
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.