Loading ...
Sorry, an error occurred while loading the content.
 

Re: [tracker2] Re: OT3m power switch question.

Expand Messages
  • Scott Miller
    Got it, I ll check it out as soon as I get a chance. Scott
    Message 1 of 6 , Dec 5, 2012
      Got it, I'll check it out as soon as I get a chance.

      Scott

      On 12/5/2012 9:21 AM, th14539 wrote:
      >
      >
      > Yes, I have the file saved but cannot add an attachment to the reply
      > email, are you scott@argentdata? if so I'll send it there.
      > Thanks
      >
      > --- In tracker2@yahoogroups.com <mailto:tracker2%40yahoogroups.com>,
      > Scott Miller <scott@...> wrote:
      > >
      > > Can you save your configuration to a file and email it to me so I can
      > > try to replicate it here?
      > >
      > > Thanks,
      > >
      > > Scott
      > >
      > > On 12/3/2012 12:16 PM, th14539 wrote:
      > > > I have an OT3m connected to a Davis Vantage Vue weather station
      > that has
      > > > the APRS streaming weatherlink installed. I verified that if I set the
      > > > OT3 to text on port A it sends out the properly formatted weather info
      > > > just fine, however, it is a battery/solar operated location so I am
      > > > using the power switch to turn the radio on and off. My issue is
      > that it
      > > > turns the radio on, waits the proper delay time, sends the packet, but
      > > > then the radio does not turn off again unless I cycle power to the OT3,
      > > > any ideas? I can turn the radio on and off from the tune tab in
      > OTWIN so
      > > > I know the switch is working.
      > > > Thanks
      > > >
      > > >
      > >
      >
      >
    • th14539
      Any update on checking this out? Thanks
      Message 2 of 6 , Dec 12, 2012
        Any update on checking this out?

        Thanks

        --- In tracker2@yahoogroups.com, Scott Miller <scott@...> wrote:
        >
        > Got it, I'll check it out as soon as I get a chance.
        >
        > Scott
        >
        > On 12/5/2012 9:21 AM, th14539 wrote:
        > >
        > >
        > > Yes, I have the file saved but cannot add an attachment to the reply
        > > email, are you scott@argentdata? if so I'll send it there.
        > > Thanks
        > >
        > > --- In tracker2@yahoogroups.com <mailto:tracker2%40yahoogroups.com>,
        > > Scott Miller <scott@> wrote:
        > > >
        > > > Can you save your configuration to a file and email it to me so I can
        > > > try to replicate it here?
        > > >
        > > > Thanks,
        > > >
        > > > Scott
        > > >
        > > > On 12/3/2012 12:16 PM, th14539 wrote:
        > > > > I have an OT3m connected to a Davis Vantage Vue weather station
        > > that has
        > > > > the APRS streaming weatherlink installed. I verified that if I set the
        > > > > OT3 to text on port A it sends out the properly formatted weather info
        > > > > just fine, however, it is a battery/solar operated location so I am
        > > > > using the power switch to turn the radio on and off. My issue is
        > > that it
        > > > > turns the radio on, waits the proper delay time, sends the packet, but
        > > > > then the radio does not turn off again unless I cycle power to the OT3,
        > > > > any ideas? I can turn the radio on and off from the tune tab in
        > > OTWIN so
        > > > > I know the switch is working.
        > > > > Thanks
        > > > >
        > > > >
        > > >
        > >
        > >
        >
      • Scott Miller
        I don t think I ever got the config file from you - at least, I can t find it under your email address. Scott
        Message 3 of 6 , Dec 28, 2012
          I don't think I ever got the config file from you - at least, I can't
          find it under your email address.

          Scott

          On 12/12/2012 8:57 PM, th14539 wrote:
          > Any update on checking this out?
          >
          > Thanks
          >
          > --- In tracker2@yahoogroups.com <mailto:tracker2%40yahoogroups.com>,
          > Scott Miller <scott@...> wrote:
          > >
          > > Got it, I'll check it out as soon as I get a chance.
          > >
          > > Scott
          > >
          > > On 12/5/2012 9:21 AM, th14539 wrote:
          > > >
          > > >
          > > > Yes, I have the file saved but cannot add an attachment to the reply
          > > > email, are you scott@argentdata? if so I'll send it there.
          > > > Thanks
          > > >
          > > > --- In tracker2@yahoogroups.com <mailto:tracker2%40yahoogroups.com>
          > <mailto:tracker2%40yahoogroups.com>,
          > > > Scott Miller <scott@> wrote:
          > > > >
          > > > > Can you save your configuration to a file and email it to me so I can
          > > > > try to replicate it here?
          > > > >
          > > > > Thanks,
          > > > >
          > > > > Scott
          > > > >
          > > > > On 12/3/2012 12:16 PM, th14539 wrote:
          > > > > > I have an OT3m connected to a Davis Vantage Vue weather station
          > > > that has
          > > > > > the APRS streaming weatherlink installed. I verified that if I
          > set the
          > > > > > OT3 to text on port A it sends out the properly formatted
          > weather info
          > > > > > just fine, however, it is a battery/solar operated location so I am
          > > > > > using the power switch to turn the radio on and off. My issue is
          > > > that it
          > > > > > turns the radio on, waits the proper delay time, sends the
          > packet, but
          > > > > > then the radio does not turn off again unless I cycle power to
          > the OT3,
          > > > > > any ideas? I can turn the radio on and off from the tune tab in
          > > > OTWIN so
          > > > > > I know the switch is working.
          > > > > > Thanks
          > > > > >
          > > > > >
          > > > >
          > > >
          > > >
          > >
          >
          >
        Your message has been successfully submitted and would be delivered to recipients shortly.