Loading ...
Sorry, an error occurred while loading the content.

Re: [tracker2] SMT OT+

Expand Messages
  • Suryono Adisoemarta
    Idle: 12 mA TX: 22 mA Sent from my iPhone4
    Message 1 of 12 , Nov 8, 2012
    • 0 Attachment
      Idle: 12 mA
      TX: 22 mA



      Sent from my iPhone4

      On Nov 9, 2012, at 7:46 AM, Matthew Cook <vk5zm@...> wrote:

      Quick question.  What's the typical current consumption of the OTUSB?  That seems like just the ticket.

      73's

      Matthew
      VK5ZM

      On Fri, Nov 9, 2012 at 3:00 AM, Scott Miller <scott@...> wrote:
      Yes, it's not great but it will decode.  The OTUSB and T2/T3 series do a
      better job at decoding.

      Scott

      On 11/7/2012 9:32 PM, Matthew Cook wrote:
      > Am I seeing things or can the OT+ hardware (possibly the SMT version
      > too) decode packets?   The product page talks about being able to send
      > and receive 1200baud AFSK, the support page lists KISS firmware.  The
      > manual doesn't talk about it at all.
      >
      > I'm looking for a cheap way to implement a hardware (not software modem)
      > TNC and the OT+ seems to fit the bill.
      >
      > Can anyone enlighten me?
      >
      > 73's
      >
      > Matthew
      > VK5ZM
      >
      >


      ------------------------------------

      Yahoo! Groups Links

      <*> To visit your group on the web, go to:
          http://groups.yahoo.com/group/tracker2/

      <*> Your email settings:
          Individual Email | Traditional

      <*> To change settings online go to:
          http://groups.yahoo.com/group/tracker2/join
          (Yahoo! ID required)

      <*> To change settings via email:
          tracker2-digest@yahoogroups.com
          tracker2-fullfeatured@yahoogroups.com

      <*> To unsubscribe from this group, send an email to:
          tracker2-unsubscribe@yahoogroups.com

      <*> Your use of Yahoo! Groups is subject to:
          http://docs.yahoo.com/info/terms/


    • Matthew Cook
      Thanks Scott, I ll place an order for some OTUSB s shortly. Any ideas on when they will be back in stock? 73 s Matthew VK5ZM ... -- Regards Matthew VK5ZM 0487
      Message 2 of 12 , Nov 8, 2012
      • 0 Attachment
        Thanks Scott,

        I'll place an order for some OTUSB's shortly.  Any ideas on when they will be back in stock?

        73's

        Matthew
        VK5ZM

        On Fri, Nov 9, 2012 at 1:36 PM, Scott Miller <scott@...> wrote:
        Somewhere around 25 mA.

        Scott

        On 11/8/2012 4:46 PM, Matthew Cook wrote:
        > Quick question.  What's the typical current consumption of the OTUSB?
        > That seems like just the ticket.
        >
        > 73's
        >
        > Matthew
        > VK5ZM
        >
        > On Fri, Nov 9, 2012 at 3:00 AM, Scott Miller <scott@...
        > <mailto:scott@...>> wrote:
        >
        >     Yes, it's not great but it will decode.  The OTUSB and T2/T3 series do a
        >     better job at decoding.
        >
        >     Scott
        >
        >     On 11/7/2012 9:32 PM, Matthew Cook wrote:
        >      > Am I seeing things or can the OT+ hardware (possibly the SMT version
        >      > too) decode packets?   The product page talks about being able to
        >     send
        >      > and receive 1200baud AFSK, the support page lists KISS firmware.  The
        >      > manual doesn't talk about it at all.
        >      >
        >      > I'm looking for a cheap way to implement a hardware (not software
        >     modem)
        >      > TNC and the OT+ seems to fit the bill.
        >      >
        >      > Can anyone enlighten me?
        >      >
        >      > 73's
        >      >
        >      > Matthew
        >      > VK5ZM
        >      >
        >      >
        >
        >
        >     ------------------------------------
        >
        >     Yahoo! Groups Links
        >
        >
        >     <mailto:tracker2-fullfeatured@yahoogroups.com>
        >
        >
        >
        >


        ------------------------------------

        Yahoo! Groups Links

        <*> To visit your group on the web, go to:
            http://groups.yahoo.com/group/tracker2/

        <*> Your email settings:
            Individual Email | Traditional

        <*> To change settings online go to:
            http://groups.yahoo.com/group/tracker2/join
            (Yahoo! ID required)

        <*> To change settings via email:
            tracker2-digest@yahoogroups.com
            tracker2-fullfeatured@yahoogroups.com

        <*> To unsubscribe from this group, send an email to:
            tracker2-unsubscribe@yahoogroups.com

        <*> Your use of Yahoo! Groups is subject to:
            http://docs.yahoo.com/info/terms/




        --
        Regards

        Matthew
        VK5ZM
        0487 653 245

      • Matthew Cook
        It just gets better and better. Thanks ! Matthew VK5ZM On Fri, Nov 9, 2012 at 2:28 PM, Suryono Adisoemarta
        Message 3 of 12 , Nov 8, 2012
        • 0 Attachment
          It just gets better and better.  Thanks !

          Matthew
          VK5ZM

          On Fri, Nov 9, 2012 at 2:28 PM, Suryono Adisoemarta <yono_adisoemarta@...> wrote:
           

          Idle: 12 mA
          TX: 22 mA



          Sent from my iPhone4

          On Nov 9, 2012, at 7:46 AM, Matthew Cook <vk5zm@...> wrote:

          Quick question.  What's the typical current consumption of the OTUSB?  That seems like just the ticket.

          73's

          Matthew
          VK5ZM

          On Fri, Nov 9, 2012 at 3:00 AM, Scott Miller <scott@...> wrote:
          Yes, it's not great but it will decode.  The OTUSB and T2/T3 series do a
          better job at decoding.

          Scott

          On 11/7/2012 9:32 PM, Matthew Cook wrote:
          > Am I seeing things or can the OT+ hardware (possibly the SMT version
          > too) decode packets?   The product page talks about being able to send
          > and receive 1200baud AFSK, the support page lists KISS firmware.  The
          > manual doesn't talk about it at all.
          >
          > I'm looking for a cheap way to implement a hardware (not software modem)
          > TNC and the OT+ seems to fit the bill.
          >
          > Can anyone enlighten me?
          >
          > 73's
          >
          > Matthew
          > VK5ZM
          >
          >


          ------------------------------------

          Yahoo! Groups Links

          <*> To visit your group on the web, go to:
              http://groups.yahoo.com/group/tracker2/

          <*> Your email settings:
              Individual Email | Traditional

          <*> To change settings online go to:
              http://groups.yahoo.com/group/tracker2/join
              (Yahoo! ID required)

          <*> To change settings via email:
              tracker2-digest@yahoogroups.com
              tracker2-fullfeatured@yahoogroups.com

          <*> To unsubscribe from this group, send an email to:
              tracker2-unsubscribe@yahoogroups.com

          <*> Your use of Yahoo! Groups is subject to:
              http://docs.yahoo.com/info/terms/





          --
          Regards

          Matthew
          VK5ZM
          0487 653 245

        • caimaver
          Are there any plans to make an embeddable version of the Open Tracker USB? I d love to see the chip from the OTUSB in the OT+ SMT form factor, especially if it
          Message 4 of 12 , Nov 9, 2012
          • 0 Attachment
            Are there any plans to make an embeddable version of the Open Tracker USB? I'd love to see the chip from the OTUSB in the OT+ SMT form factor, especially if it had TTL serial instead of RS-232.

            - Cai /W6CAI

            --- In tracker2@yahoogroups.com, Scott Miller <scott@...> wrote:
            >
            > Yes, it's not great but it will decode. The OTUSB and T2/T3 series do a
            > better job at decoding.
            >
            > Scott
            >
            > On 11/7/2012 9:32 PM, Matthew Cook wrote:
            > > Am I seeing things or can the OT+ hardware (possibly the SMT version
            > > too) decode packets? The product page talks about being able to send
            > > and receive 1200baud AFSK, the support page lists KISS firmware. The
            > > manual doesn't talk about it at all.
            > >
            > > I'm looking for a cheap way to implement a hardware (not software modem)
            > > TNC and the OT+ seems to fit the bill.
            > >
            > > Can anyone enlighten me?
            > >
            > > 73's
            > >
            > > Matthew
            > > VK5ZM
            > >
            > >
            >
          • Scott Miller
            Yes, I ve got the first batch of boards here already. There s a small error on the board so it needs a very short bridge wire, but it works. I still need to
            Message 5 of 12 , Nov 9, 2012
            • 0 Attachment
              Yes, I've got the first batch of boards here already. There's a small
              error on the board so it needs a very short bridge wire, but it works.
              I still need to write some code to allow switching between RS-232 and
              TTL polarity. The board can run on 3v or 5v and works with either the
              OTUSB or T3 MCU.

              Scott

              On 11/9/2012 9:22 AM, caimaver wrote:
              > Are there any plans to make an embeddable version of the Open Tracker
              > USB? I'd love to see the chip from the OTUSB in the OT+ SMT form factor,
              > especially if it had TTL serial instead of RS-232.
              >
              > - Cai /W6CAI
              >
              > --- In tracker2@yahoogroups.com <mailto:tracker2%40yahoogroups.com>,
              > Scott Miller <scott@...> wrote:
              > >
              > > Yes, it's not great but it will decode. The OTUSB and T2/T3 series do a
              > > better job at decoding.
              > >
              > > Scott
              > >
              > > On 11/7/2012 9:32 PM, Matthew Cook wrote:
              > > > Am I seeing things or can the OT+ hardware (possibly the SMT version
              > > > too) decode packets? The product page talks about being able to send
              > > > and receive 1200baud AFSK, the support page lists KISS firmware. The
              > > > manual doesn't talk about it at all.
              > > >
              > > > I'm looking for a cheap way to implement a hardware (not software
              > modem)
              > > > TNC and the OT+ seems to fit the bill.
              > > >
              > > > Can anyone enlighten me?
              > > >
              > > > 73's
              > > >
              > > > Matthew
              > > > VK5ZM
              > > >
              > > >
              > >
              >
              >
            • caimaver
              Outstanding! I ll be ordering one as soon as it s available. Thanks! - Cai /W6CAI
              Message 6 of 12 , Nov 9, 2012
              • 0 Attachment
                Outstanding! I'll be ordering one as soon as it's available. Thanks!

                - Cai /W6CAI

                --- In tracker2@yahoogroups.com, Scott Miller <scott@...> wrote:
                >
                > Yes, I've got the first batch of boards here already. There's a small
                > error on the board so it needs a very short bridge wire, but it works.
                > I still need to write some code to allow switching between RS-232 and
                > TTL polarity. The board can run on 3v or 5v and works with either the
                > OTUSB or T3 MCU.
                >
                > Scott
                >
                > On 11/9/2012 9:22 AM, caimaver wrote:
                > > Are there any plans to make an embeddable version of the Open Tracker
                > > USB? I'd love to see the chip from the OTUSB in the OT+ SMT form factor,
                > > especially if it had TTL serial instead of RS-232.
                > >
                > > - Cai /W6CAI
                > >
                > > --- In tracker2@yahoogroups.com <mailto:tracker2%40yahoogroups.com>,
                > > Scott Miller <scott@> wrote:
                > > >
                > > > Yes, it's not great but it will decode. The OTUSB and T2/T3 series do a
                > > > better job at decoding.
                > > >
                > > > Scott
                > > >
                > > > On 11/7/2012 9:32 PM, Matthew Cook wrote:
                > > > > Am I seeing things or can the OT+ hardware (possibly the SMT version
                > > > > too) decode packets? The product page talks about being able to send
                > > > > and receive 1200baud AFSK, the support page lists KISS firmware. The
                > > > > manual doesn't talk about it at all.
                > > > >
                > > > > I'm looking for a cheap way to implement a hardware (not software
                > > modem)
                > > > > TNC and the OT+ seems to fit the bill.
                > > > >
                > > > > Can anyone enlighten me?
                > > > >
                > > > > 73's
                > > > >
                > > > > Matthew
                > > > > VK5ZM
                > > > >
                > > > >
                > > >
                > >
                > >
                >
              Your message has been successfully submitted and would be delivered to recipients shortly.