Loading ...
Sorry, an error occurred while loading the content.
 

Re: OT3m with external DS18S20

Expand Messages
  • Mads
    Thanks Scott! The firmware you sent me works like a charm. I m sorry I haven t had the chance to test it until today. 73! Mads, la1tpa
    Message 1 of 5 , Sep 18, 2012
      Thanks Scott!

      The firmware you sent me works like a charm. I'm sorry I haven't had the chance to test it until today.

      73! Mads, la1tpa

      --- In tracker2@yahoogroups.com, Scott Miller <scott@...> wrote:
      >
      > On 9/9/2012 12:04 PM, la1tpa wrote:
      > > I'm trying to connect an external DS18S20 to an OT3m. It works great as
      > > long as the temperature stays above 0°c but as soon as it falls bellow
      > > the temperature is shown as 309°c! I have tried two different sensors
      >
      > I'll send you a new firmware file off-list to test. I just checked and
      > there does seem to be a sign extension problem in the DS18S20 code. My
      > bench is set up for another project that I don't want to disturb at the
      > moment, so I haven't had a chance to check it out myself, but it
      > *should* fix the problem.
      >
      > Scott
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.