Loading ...
Sorry, an error occurred while loading the content.

Re: [tracker2] Re: ot3m and garmin 1490LMT

Expand Messages
  • Scott Miller
    ... For the OT3m, you should have the yellow wire on pin 2, white on pin 3, and brown on pin 5. For the T3-135, swap 2 and 3. ... No, that should do it. Make
    Message 1 of 5 , Jun 11, 2012
    • 0 Attachment
      > I tried with the ot3m in garmin mode 9600 bps and auto, but stile no fmi
      > mode is showing.. The info from garmin explains that ex serial to gps is
      > suppose to go on pin 3 and tx serial is suppose to go to pin 2 on the
      > dsub. dose that match your configuration in any way.

      For the OT3m, you should have the yellow wire on pin 2, white on pin 3,
      and brown on pin 5. For the T3-135, swap 2 and 3.

      > And is there some more places to change/configure on the OT3m other then
      > the garmin/auto mode for the port in the software?

      No, that should do it. Make sure you've got power connected to the FMI
      cable.

      Scott
    Your message has been successfully submitted and would be delivered to recipients shortly.