RE: [tracker2] Re: Firmware build 54075 released
- I changed the logic on the orange blink - I need to put it back in the Peet Bros code.
From: email@example.com [mailto:firstname.lastname@example.org] On Behalf Of k0yg
Sent: Thursday, December 07, 2006 8:10 AM
Subject: [tracker2] Re: Firmware build 54075 released
This build fixed my problem with the Peet WX station as well. I'm
now getting data every every 5 minutes as programmed. I think the
orange flash on the LED went away - or at least I haven't noticed it.
--- In tracker2@yahoogroup s.com, "Scott Miller" <scott@...> wrote:
> I just posted an update that should fix the issues identified
> position mode seems to be working now, and you can exit from KISS
> Just keep in mind that it'll cause BOTH ports to exit KISS mode if
> them both set that way.
> Also, to simplify exiting from KISS mode, you can just hit ctrl-c
twice in a
> row. For Garmin mode, just hit enter a few times. In both cases,
> to have the right baud rate selected in your terminal program.
> Bearing and range output is now disabled, at least until I have a
> make it an option and verify that the bearing part works right.
> sure that it's properly compensating for the convergence of the