Loading ...
Sorry, an error occurred while loading the content.

Re: [tracker2] Connections ADS-GM1 GPS Receiver to DR 135

Expand Messages
  • Scott Miller
    The manufacturer changed the wire colors without notice. I ve removed the information from the product listing to avoid confusion. Scott
    Message 1 of 7 , Dec 6, 2011
    • 0 Attachment
      The manufacturer changed the wire colors without notice. I've removed
      the information from the product listing to avoid confusion.

      Scott

      On 12/6/2011 5:07 AM, Gerry Graff wrote:
      > Scott,
      >
      > You answered this question on the tapr.org <http://tapr.org> site to a
      > question about trying to identify GPS Modules. See:
      >
      > http://www.tapr.org/pipermail/aprssig/2008-March/024099.html
      >
      > You have the correct wiring on that answer, but on your product page--
      >
      > https://www.argentdata.com/catalog/product_info.php?cPath=23&products_id=85
      > <https://www.argentdata.com/catalog/product_info.php?cPath=23&products_id=85>
      >
      > the information is wrong and needs fixing. I normally do not like to
      > "try" things with live current, but I did without frying everything, and
      > your product page needs to be corrected (to match your answer on
      > tapr.org <http://tapr.org>) with the following:
      >
      > PinWireFunction
      > 2RedRS-232 data out (+/- 6v) NO THIS IS POWER IN
      > 3BrownRS-232 data in THERE IS NO BROWN WIRE
      > 4GreenPower in NO THIS IS DATA OUT
      > 5BlueGround NO THERE IS NO BLE WIRE
      > -YellowTTL data out (0-3v)
      > -BlackTTL data in NO THIS IS GROUND
      >
      > Below the table you write: /For use with the Alinco DR-135T, a 3.5mm
      > stereo plug should be wired as follows: Red to tip, green to ring, and
      > blue to sleeve./ THIS IS WRONG, IT SHOULD BE GREEN TO TIP, RED TO RING
      > and BLACK TO SLEEVE
      >
      > I know you and the group have loftier things to discuss on the forum,
      > but to get to the loftier things, the basics should be mastered.
      >
      > Gerry
      > W5LCY
      >
      >
      > On Dec 5, 2011, at 11:35 AM, Gerry Graff wrote:
      >
      >> In connecting ADS-GM1 GPS Receiver to the DR-135T via a stereo plug to
      >> the front port of the Alinco (and the T2-135 circuit board) the Argent
      >> Store GPS product page says to connect: the leads from the GPS as follows:
      >>
      >> Red wire (data out) to Tip
      >> Green wire (power In) to Ring
      >> and Blue wire (ground) to Sleeve.
      >>
      >> The problem I have is
      >>
      >> 1. There is no blue wire (ground)
      >>
      >> I have a Red, White, Green and Black wire -- to choose from when I
      >> strip back the wire from the GPS.
      >>
      >> What is the correct (updated) wiring? (and maybe fix the product page)
      >>
      >> Gerry Graff
      >>
      >>
      >>
      >> ------------------------------------
      >>
      >> Yahoo! Groups Links
      >>
      >>
      >> <mailto:tracker2-fullfeatured@yahoogroups.com>
      >>
      >>
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.