Loading ...
Sorry, an error occurred while loading the content.

Re: [tracker2] T2-301, UI-View and GPS

Expand Messages
  • Scott Miller
    No, you won t get position data from the GPS in KISS mode. There was discussion about a standard for passing GPS data in KISS frames, but that happened after
    Message 1 of 2 , Nov 6, 2011
    • 0 Attachment
      No, you won't get position data from the GPS in KISS mode. There was
      discussion about a standard for passing GPS data in KISS frames, but
      that happened after Roger died and as far as I know there's no add-on
      for UI-View that will parse it.

      Scott

      On 11/5/2011 2:51 PM, tony@... wrote:
      > I am attempting to get this configuration to work and am having no luck
      > with the GPS data feeding into UI-View.
      >
      > The configuration I have is the T2-301,T2-301 Serial + Power Cable and
      > Serial Splitter Cable.
      >
      > Port A is connected to UI-View and I can receive data.
      > Port B is connected to the GPS via cabling that has worked with T2's in
      > the past.
      >
      > Both ports are set to 4800 baud. Port A is set to KISS and Port B is set
      > to Auto.
      >
      > With UI-View running I get no info from the GPS receiver. This tracking
      > is beaconing W5ADC-6 and will be up most of the time over the next few
      > days. The location is currently fixed in UI-View.
      >
      > Is this configuration even possible? If so, what am I doing wrong?
      >
      > Thanks,
      >
      > Tony
      > W5ADC
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.