Loading ...
Sorry, an error occurred while loading the content.

Re: I WOULD LIKE REVISIT profiles SWITHING

Expand Messages
  • Alan
    There is a picture of a simple switch in the photos section. An RG-25 Profile 1 or 2, and force beacon switch.
    Message 1 of 10 , Sep 6, 2011
    • 0 Attachment
      There is a picture of a simple switch in the photos section. An RG-25 Profile 1 or 2, and force beacon switch.

      http://groups.yahoo.com/group/tracker2/photos/album/2016843644/pic/list

      Alan

      --- In tracker2@yahoogroups.com, kd4dra <kd4dra@...> wrote:
      >
      > Yes Fred that is correct...Thanks for your Help
      >
      >
      > Rick
      > KD4DRA
      >
      >
      >
      > >________________________________
      > >From: Fred Hillhouse <fmhillhouse@...>
      > >To: tracker2@yahoogroups.com
      > >Sent: Tuesday, September 6, 2011 4:31 PM
      > >Subject: RE: [tracker2] I WOULD LIKE REVISIT profiles SWITHING
      > >
      > >
      > > 
      > >My assumption is you will not use a GPS in the house but you
      > will in the vehicle. So for in the house a fixed set of coordinates would
      > be used and for the vehicle, the GPS would supply the location
      > information. 
      > > 
      > > 
      > > 
      > >
      > >________________________________
      > >
      > >From: tracker2@yahoogroups.com [mailto:tracker2@yahoogroups.com] On Behalf Of Fred Hillhouse
      > >Sent: Tuesday, September 06, 2011
      > 16:28
      > >To: tracker2@yahoogroups.com
      > >Subject: RE: [tracker2] I
      > WOULD LIKE REVISIT profiles SWITHING
      > >
      > > 
      > >On the assessory connector, if pin 6 is shorted to pin 2 or 3,
      > then the alternate profile is changed.
      > >
      > >
      > >________________________________
      > > From: tracker2@yahoogroups.com
      > [mailto:tracker2@yahoogroups.com] On Behalf Of Rick
      > >Sent: Tuesday, September 06, 2011 16:13
      > >To: tracker2@yahoogroups.com
      > >Subject: Re: [tracker2] I WOULD LIKE REVISIT
      > profiles SWITHING
      > >
      > > 
      > >You mean,  like have the profile pins shorted and just plug the rj40
      > or whatever # it is into the jack and there you go
      > >
      > >
      > >Rick
      > >
      > >My iPhone 
      > >
      > >On Sep 6, 2011, at 3:46 PM, "Fred Hillhouse" <fmhillhouse@...>
      > wrote:
      > >
      > >
      > > 
      > >>The connector on the front has a profile control contact. You could add a plug that would be one profile when it is inserted.
      > >> 
      > >> 
      > >>
      > >>________________________________
      > >>
      > >>From: tracker2@yahoogroups.com [mailto:tracker2@yahoogroups.com] On Behalf Of Rick
      > >>Sent: Tuesday, September 06, 2011 15:36
      > >>To: tracker2@yahoogroups.com
      > >>Subject: [tracker2] I WOULD LIKE REVISIT profiles SWITHING
      > >>
      > >> 
      > >>I would like to use my OT2m in two locations, Home a majority of the time, then Mobile slightly...The question I have if I change the profile in the QTH to mobile before I go outside to the mobile then it will lose power. Does the unit default to a profile when powered up?
      > >>
      > >>Any suggestions on how you
      > would do it, or maybe you are doing this already.
      > >>
      > >>Thanks for any
      > help
      > >>
      > >>Rick-kd4dra
      > >>
      > >>
      > >
      > >
      > >
      >
    • Rick
      Thanks Alan Rick My iPhone ... Thanks Alan Rick My iPhone On Sep 6, 2011, at 11:55 PM, Alan wrote: There is a picture of a simple switch
      Message 2 of 10 , Sep 7, 2011
      • 0 Attachment
        Thanks Alan
        Rick


        My iPhone 

        On Sep 6, 2011, at 11:55 PM, "Alan" <alan@...> wrote:

         

        There is a picture of a simple switch in the photos section. An RG-25 Profile 1 or 2, and force beacon switch.

        http://groups.yahoo.com/group/tracker2/photos/album/2016843644/pic/list

        Alan

        --- In tracker2@yahoogroups.com, kd4dra <kd4dra@...> wrote:
        >
        > Yes Fred that is correct...Thanks for your Help
        >
        >
        > Rick
        > KD4DRA
        >
        >
        >
        > >________________________________
        > >From: Fred Hillhouse <fmhillhouse@...>
        > >To: tracker2@yahoogroups.com
        > >Sent: Tuesday, September 6, 2011 4:31 PM
        > >Subject: RE: [tracker2] I WOULD LIKE REVISIT profiles SWITHING
        > >
        > >
        > > 
        > >My assumption is you will not use a GPS in the house but you
        > will in the vehicle. So for in the house a fixed set of coordinates would
        > be used and for the vehicle, the GPS would supply the location
        > information. 
        > > 
        > > 
        > > 
        > >
        > >________________________________
        > >
        > >From: tracker2@yahoogroups.com [mailto:tracker2@yahoogroups.com] On Behalf Of Fred Hillhouse
        > >Sent: Tuesday, September 06, 2011
        > 16:28
        > >To: tracker2@yahoogroups.com
        > >Subject: RE: [tracker2] I
        > WOULD LIKE REVISIT profiles SWITHING
        > >
        > > 
        > >On the assessory connector, if pin 6 is shorted to pin 2 or 3,
        > then the alternate profile is changed.
        > >
        > >
        > >________________________________
        > > From: tracker2@yahoogroups.com
        > [mailto:tracker2@yahoogroups.com] On Behalf Of Rick
        > >Sent: Tuesday, September 06, 2011 16:13
        > >To: tracker2@yahoogroups.com
        > >Subject: Re: [tracker2] I WOULD LIKE REVISIT
        > profiles SWITHING
        > >
        > > 
        > >You mean,  like have the profile pins shorted and just plug the rj40
        > or whatever # it is into the jack and there you go
        > >
        > >
        > >Rick
        > >
        > >My iPhone 
        > >
        > >On Sep 6, 2011, at 3:46 PM, "Fred Hillhouse" <fmhillhouse@...>
        > wrote:
        > >
        > >
        > > 
        > >>The connector on the front has a profile control contact. You could add a plug that would be one profile when it is inserted.
        > >> 
        > >> 
        > >>
        > >>________________________________
        > >>
        > >>From: tracker2@yahoogroups.com [mailto:tracker2@yahoogroups.com] On Behalf Of Rick
        > >>Sent: Tuesday, September 06, 2011 15:36
        > >>To: tracker2@yahoogroups.com
        > >>Subject: [tracker2] I WOULD LIKE REVISIT profiles SWITHING
        > >>
        > >> 
        > >>I would like to use my OT2m in two locations, Home a majority of the time, then Mobile slightly...The question I have if I change the profile in the QTH to mobile before I go outside to the mobile then it will lose power. Does the unit default to a profile when powered up?
        > >>
        > >>Any suggestions on how you
        > would do it, or maybe you are doing this already.
        > >>
        > >>Thanks for any
        > help
        > >>
        > >>Rick-kd4dra
        > >>
        > >>
        > >
        > >
        > >
        >

      Your message has been successfully submitted and would be delivered to recipients shortly.