Re: T2-301 transmission not heard
- Problem resolved:
- Lowered TX power to 25%
- Connected via Hyperterminal and used SETFREQ 144.390 144.390
Probably was just the former that needed to be changed due to proximity of T2-301 to Kenwood.
--- In firstname.lastname@example.org, "seerdman" <seerdman@...> wrote:
> Okay gurus - need your advice on a new T2-301 that's come back after repairing a problem that prevented me from connecting in otwincfg. Now I'm trying to get this up and running.
> I'm using a Kenwood D710 to verify TX. When the T2-301's red TX led comes on, I hear and see nothing on the Kenwood or aprs.fi. When I receive from other stations on the Kenwood, the T2-301's green RX led is lit simultaneously. Other items:
> Supplying 12V power.
> Using an Argent rubber duck.
> Call sign is entered in the config and both profiles are identical.
> I'm set to a baud rate of 1200.
> "Don't require GPS fix" is checked to take the GPS out of the equation.
> TX power level is set to max.
> TX cycle is set to 120 seconds with 165 mSec delay.
> Path is set to Wide 2-1.
> Steve, KF7MXS