Loading ...
Sorry, an error occurred while loading the content.

Re: [tracker2] Re: DR-135/T2-135 receive problem.

Expand Messages
  • Scott Miller
    Email me off-list with your order number and I ll get you an RMA. Thanks, Scott
    Message 1 of 8 , Jun 10, 2011
    • 0 Attachment
      Email me off-list with your order number and I'll get you an RMA.



      On 6/9/2011 1:37 PM, N5UDK wrote:
      > OK, this is what we found.
      > Installed T2 into another new DR-135 and let run overnight and still
      > won't receive.
      > Configured a new T2 using the same .cfg file as before and installed
      > into the original DR-135 and immediately started recieving and gating
      > traffic.
      > Looks like I have a bad T2 board.
      > Scott, what do I need to do to get it replaced?
      > Thanks,
      > Tim, N5UDK
      > --- In tracker2@yahoogroups.com <mailto:tracker2%40yahoogroups.com>,
      > "N5UDK" <tpurvis@...> wrote:
      > >
      > > I'm having receive problem with a new Alinco DR-135 and new T2-135.
      > Radio is in data mode, narrow mode and am using new cable and usb serial
      > adapter from Argent Data. I'm not sure if I have a radio problem or TNC
      > problem. Can anyone help me with this?
      > >
      > > According to an oscilloscope, the radio is receiving data but appears
      > to be distorted audio coming into the TNC. Xastir will not receive APRS
      > data over the air via the TNC. However, using the config software we are
      > able to read the data and then write the data. Xastir can transmit and
      > verified by another station on site.
      > >
      > > The audio coming into Connector CN2 pin 3 is very distorted with what
      > > appears to be a combination of clipping and phase shift.
      > >
      > > Green LED on T2-135 only lights when writting data. TX works OK.
      > >
      > > Tim, N5UDK
      > >
    Your message has been successfully submitted and would be delivered to recipients shortly.