Re: [tracker2] Re: T2-301 & Tracker2 config
Sent from my Android.
831.239.4118On May 24, 2011 6:24 PM, "Keith VE7GDH" <ve7gdh@...> wrote:
> BigMan (VE4DDW?) wrote...
>> I run my own digi, with UI-View so I am monitoring the terminal for
>> local traffic. I can't get the T2-301 to be received by my station. I even
>> tried it with my beam to see if I could hit another digi in the area with
>> no luck. I have 6 other trackers (combo of Argent and TinyTrak) and
>> they are all good. The audio must be off too much. The levels seem o.k.
>> but I think the actually tones are off a bit too much.
> Presumably UI-View is displaying other stations. Are you using a
> hardware or software TNC with it? Of course, both should work.
> I'm not sure how to interpet "the levels seem OK" along with "I
> think the tones are off a bit too much". Try setting the level about
> half way up the slider if you are using otwincfg.exe to set the levels
> as opposed to using a terminal program.
>> I've tried TX Delay from 160 to 800 in increments, and just about
>> every level of Audio from nothing to way over modulated. Same
>> SSID and path as another tracker I have (no, not currently in service).
> I've had success with well under 100 ms TXdelay, but typically use
> 125-150 ms. While I get decoded with the slider at the top in otwincfg.exe
> I usually set it about half way up the slider with a very good success
> What is the callsign-SSID in the T2-301? Is it active and beaconing now?
> Do you have a manual position entered, or is there a GPS connected?
> What is the callsign-SSID of the iGate?
> You could try uploading the configuration file with the settings to the
> files area.
> 73 es cul - Keith VE7GDH
> "I may be lost, but I know exactly where I am!"