Loading ...
Sorry, an error occurred while loading the content.

Re: [tracker2] Re: Unable to connect to the Tracker2

Expand Messages
  • Scott Miller
    Make sure flow control is disabled in your terminal program. If it s a hardware problem, the most likely trouble spot is the soldering on the ST202 chip. Scott
    Message 1 of 7 , Apr 29, 2011
    • 0 Attachment
      Make sure flow control is disabled in your terminal program.

      If it's a hardware problem, the most likely trouble spot is the
      soldering on the ST202 chip.

      Scott

      On 4/27/2011 11:59 PM, tbanks204 wrote:
      > Yes, that is correct, you do not need another coffee, it will not accept
      > keyboard commands, therefore I cannot change the programing in it. I am
      > going to connect it to another computer, and give that a try, but it
      > worked ok a week or three ago.
      >
      > --- In tracker2@yahoogroups.com <mailto:tracker2%40yahoogroups.com>,
      > "Rudy Benner" <rudy@...> wrote:
      > >
      > > I am missing something, you can see data from the tracker using a
      > terminal program, but you say you cannot connect to the tracker.
      > >
      > > Maybe I need another coffee for clarity.
      > >
      > > VE3BDR/VE3YTS
      > >
      > > From: tbanks204
      > > Sent: Thursday, April 28, 2011 12:53 AM
      > > To: tracker2@yahoogroups.com <mailto:tracker2%40yahoogroups.com>
      > > Subject: [tracker2] Unable to connect to the Tracker2
      > >
      > >
      > > I am unable to connect to my Tracker2, I have tried using two
      > different serial ports, and one USB serial adapter, nothing, It
      > transmits and receives data, via radio and I can receive data via USB
      > Serial Adapter connected to my computer, using Tera Term Pro, I just
      > cannot communicate with the tracker. Any Ideas
      > >
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.