Loading ...
Sorry, an error occurred while loading the content.

Re: Converting d-sub GTRANS to Kenwood

Expand Messages
  • gerrykav
    So, 2 - tip, 3 - ring, 5 - gnd? Thanks to all for the info.
    Message 1 of 6 , Feb 2, 2011
    • 0 Attachment
      So, 2 -> tip, 3 -> ring, 5 -> gnd?

      Thanks to all for the info.

      --- In tracker2@yahoogroups.com, Kent <khufford@...> wrote:
      >
      > Pins 2,3 and pin 5 is ground barrel
      >
      >
      > On Feb 1, 2011, at 18:21, "gerrykav" <gerryk777@...> wrote:
      >
      > > Thanks, I thought that might be the case.
      > > Now... I don't suppose anyone has the pinout off the top of their heads? I did have a look around and couldn't find any reference to it.
      > > regards
      > > Gerry EI8DRB
      > >
      > > --- In tracker2@yahoogroups.com, Larry Simon <kc7qjo@> wrote:
      > > >
      > > > ---- Jason KG4WSV <kg4wsv@> wrote:
      > > > > On Tue, Feb 1, 2011 at 10:22 AM, gerrykav <gerryk777@> wrote:
      > > > > > Would it be possible to convert it to the Kenwood connector, preferably non-destructively, as I do intend to retrieve the T2 at some stage.
      > > > >
      > > > > I would guess it would be as simple as making a 3 wire DB9-2.5mm
      > > > > stereo cable to adapt the physical connection. A "standard" Kenwood
      > > > > GPS cable should do the trick.
      > > > >
      > > > > -Jason
      > > > > kg4wsv
      > > >
      > > > This is how I have mine setup and it works fine.
      > > > --
      > > > Larry Simon
      > > > KC7QJO
      > > >
      > >
      > >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.