Loading ...
Sorry, an error occurred while loading the content.
 

Re: [tracker2] Re: Converting d-sub GTRANS to Kenwood

Expand Messages
  • Kent
    Pins 2,3 and pin 5 is ground barrel
    Message 1 of 6 , Feb 1, 2011
      Pins 2,3 and pin 5 is ground barrel


      On Feb 1, 2011, at 18:21, "gerrykav" <gerryk777@...> wrote:

       

      Thanks, I thought that might be the case.
      Now... I don't suppose anyone has the pinout off the top of their heads? I did have a look around and couldn't find any reference to it.
      regards
      Gerry EI8DRB

      --- In tracker2@yahoogroups.com, Larry Simon <kc7qjo@...> wrote:
      >
      > ---- Jason KG4WSV <kg4wsv@...> wrote:
      > > On Tue, Feb 1, 2011 at 10:22 AM, gerrykav <gerryk777@...> wrote:
      > > > Would it be possible to convert it to the Kenwood connector, preferably non-destructively, as I do intend to retrieve the T2 at some stage.
      > >
      > > I would guess it would be as simple as making a 3 wire DB9-2.5mm
      > > stereo cable to adapt the physical connection. A "standard" Kenwood
      > > GPS cable should do the trick.
      > >
      > > -Jason
      > > kg4wsv
      >
      > This is how I have mine setup and it works fine.
      > --
      > Larry Simon
      > KC7QJO
      >

    • gerrykav
      So, 2 - tip, 3 - ring, 5 - gnd? Thanks to all for the info.
      Message 2 of 6 , Feb 2, 2011
        So, 2 -> tip, 3 -> ring, 5 -> gnd?

        Thanks to all for the info.

        --- In tracker2@yahoogroups.com, Kent <khufford@...> wrote:
        >
        > Pins 2,3 and pin 5 is ground barrel
        >
        >
        > On Feb 1, 2011, at 18:21, "gerrykav" <gerryk777@...> wrote:
        >
        > > Thanks, I thought that might be the case.
        > > Now... I don't suppose anyone has the pinout off the top of their heads? I did have a look around and couldn't find any reference to it.
        > > regards
        > > Gerry EI8DRB
        > >
        > > --- In tracker2@yahoogroups.com, Larry Simon <kc7qjo@> wrote:
        > > >
        > > > ---- Jason KG4WSV <kg4wsv@> wrote:
        > > > > On Tue, Feb 1, 2011 at 10:22 AM, gerrykav <gerryk777@> wrote:
        > > > > > Would it be possible to convert it to the Kenwood connector, preferably non-destructively, as I do intend to retrieve the T2 at some stage.
        > > > >
        > > > > I would guess it would be as simple as making a 3 wire DB9-2.5mm
        > > > > stereo cable to adapt the physical connection. A "standard" Kenwood
        > > > > GPS cable should do the trick.
        > > > >
        > > > > -Jason
        > > > > kg4wsv
        > > >
        > > > This is how I have mine setup and it works fine.
        > > > --
        > > > Larry Simon
        > > > KC7QJO
        > > >
        > >
        > >
        >
      Your message has been successfully submitted and would be delivered to recipients shortly.