Loading ...
Sorry, an error occurred while loading the content.

Re: Converting d-sub GTRANS to Kenwood

Expand Messages
  • gerrykav
    Thanks, I thought that might be the case. Now... I don t suppose anyone has the pinout off the top of their heads? I did have a look around and couldn t find
    Message 1 of 6 , Feb 1, 2011
    • 0 Attachment
      Thanks, I thought that might be the case.
      Now... I don't suppose anyone has the pinout off the top of their heads? I did have a look around and couldn't find any reference to it.
      regards
      Gerry EI8DRB

      --- In tracker2@yahoogroups.com, Larry Simon <kc7qjo@...> wrote:
      >
      > ---- Jason KG4WSV <kg4wsv@...> wrote:
      > > On Tue, Feb 1, 2011 at 10:22 AM, gerrykav <gerryk777@...> wrote:
      > > > Would it be possible to convert it to the Kenwood connector, preferably non-destructively, as I do intend to retrieve the T2 at some stage.
      > >
      > > I would guess it would be as simple as making a 3 wire DB9-2.5mm
      > > stereo cable to adapt the physical connection. A "standard" Kenwood
      > > GPS cable should do the trick.
      > >
      > > -Jason
      > > kg4wsv
      >
      > This is how I have mine setup and it works fine.
      > --
      > Larry Simon
      > KC7QJO
      >
    • Kent
      Pins 2,3 and pin 5 is ground barrel
      Message 2 of 6 , Feb 1, 2011
      • 0 Attachment
        Pins 2,3 and pin 5 is ground barrel


        On Feb 1, 2011, at 18:21, "gerrykav" <gerryk777@...> wrote:

         

        Thanks, I thought that might be the case.
        Now... I don't suppose anyone has the pinout off the top of their heads? I did have a look around and couldn't find any reference to it.
        regards
        Gerry EI8DRB

        --- In tracker2@yahoogroups.com, Larry Simon <kc7qjo@...> wrote:
        >
        > ---- Jason KG4WSV <kg4wsv@...> wrote:
        > > On Tue, Feb 1, 2011 at 10:22 AM, gerrykav <gerryk777@...> wrote:
        > > > Would it be possible to convert it to the Kenwood connector, preferably non-destructively, as I do intend to retrieve the T2 at some stage.
        > >
        > > I would guess it would be as simple as making a 3 wire DB9-2.5mm
        > > stereo cable to adapt the physical connection. A "standard" Kenwood
        > > GPS cable should do the trick.
        > >
        > > -Jason
        > > kg4wsv
        >
        > This is how I have mine setup and it works fine.
        > --
        > Larry Simon
        > KC7QJO
        >

      • gerrykav
        So, 2 - tip, 3 - ring, 5 - gnd? Thanks to all for the info.
        Message 3 of 6 , Feb 2, 2011
        • 0 Attachment
          So, 2 -> tip, 3 -> ring, 5 -> gnd?

          Thanks to all for the info.

          --- In tracker2@yahoogroups.com, Kent <khufford@...> wrote:
          >
          > Pins 2,3 and pin 5 is ground barrel
          >
          >
          > On Feb 1, 2011, at 18:21, "gerrykav" <gerryk777@...> wrote:
          >
          > > Thanks, I thought that might be the case.
          > > Now... I don't suppose anyone has the pinout off the top of their heads? I did have a look around and couldn't find any reference to it.
          > > regards
          > > Gerry EI8DRB
          > >
          > > --- In tracker2@yahoogroups.com, Larry Simon <kc7qjo@> wrote:
          > > >
          > > > ---- Jason KG4WSV <kg4wsv@> wrote:
          > > > > On Tue, Feb 1, 2011 at 10:22 AM, gerrykav <gerryk777@> wrote:
          > > > > > Would it be possible to convert it to the Kenwood connector, preferably non-destructively, as I do intend to retrieve the T2 at some stage.
          > > > >
          > > > > I would guess it would be as simple as making a 3 wire DB9-2.5mm
          > > > > stereo cable to adapt the physical connection. A "standard" Kenwood
          > > > > GPS cable should do the trick.
          > > > >
          > > > > -Jason
          > > > > kg4wsv
          > > >
          > > > This is how I have mine setup and it works fine.
          > > > --
          > > > Larry Simon
          > > > KC7QJO
          > > >
          > >
          > >
          >
        Your message has been successfully submitted and would be delivered to recipients shortly.